$0.00
View All
Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For pitches of 0/12-6/12. Made of galvalume.
Item#: 2591278
x
Use to attach an appliance to DuraConnect connector pipe.
Item#: 2591489
Use for venting listed natural gas or liquid propane Category I, draft hood apliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B GasVent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters.
To calculate installed length, subtract 1 1/2" from each connection of vent. A 1" clearance (air space) to combustible materials must be maintained. To calculate OD add 5/8".
Item#: 2590982
Use to support and center Oval Tee. Use with Oval Tee Cap.
Item#: 2591528
Use to attach oval vent to a wall furnace.
Item#: 2591529
Use to close off bottom of Oval Tee. Fits on inner liner.
Item#: 2591428
Use to maintain a weather tight resistant seal between the pipe and the flashing.
Item#: 2591432
Use at every ceiling level where Square Firestop Support is not used. 3"-6" style may vary.
Item#: 2591231
Use to center oval vent in a minimum 16" on-center stud space. Serves as a firestop at the ceiling level. Required in multi-story installations.
Item#: 2591412
Use to center the oval vent where Oval Firestop Spacer is not required. (2 plates included.)
Item#: 2591530
Use for decorative purposes. Optional.
Item#: 2591244
Use to cap Standard Tee or Increaser Tee. Remove Tee Cap to inspect the system; clean out debris or collected condensate from the common vent. Fits on inner liner.
Item#: 2591122
Item#: 2591260
Use with corrugated metal or tile roofs. Available in Adjustable Roof Flashing style (0/12-6/12). Made of dead soft aluminum. Refer to Roof Flashing tables for dimensions.
Item#: 2591440
Use as a connector system to replace rigid gas vent with a flexible section. DuraConnect II can be used when Type B Gas Vent double-wall connector is required. Not to be enclosed and cannot penetrate through walls, floors, or ceilings. Twist-lock connectors on each end.
Item#: 2591448
Use to support the Type B Gas Vent between 16" to 24" on center joists or rafters. A Firestop Spacer is required.
Item#: 2591497
Use for a 90° offset or to combine connectors from two or more appliances into a common vent.
Item#: 2591501
Attaches smaller pipe to branch and smaller pipe to body. Use for a 90° offset or to combine connectors from two or more appliances into a common vent. Additional sizes available through special order.
Item#: 2591508
Use to cap Standard Tee or Increaser Tee. Remove Tee Cap to inspect the system; clean out debris or collected condensate from the common vent. Fits on outer wall.
Item#: 2591511
Use to combine DuraConnect connectors from two or more appliances into a common vent. Additional sizes available through special order.
Item#: 2591515
Use to attach round pipe to oval pipe. Use for a 90° offset or to combine connectors from two or more appliances into a common vent. Shorter snout allows installation in tight spaces.
Item#: 2591422
Use to attach round pipe to oval pipe. Use for a 90° offset or to combine connectors from two or more appliances into a common vent.
Item#: 2591418
Use to combine DuraConnect connectors from two or more appliances. Use to connect single-wall pipe or DuraConnect to common vented Type B Gas Vent.
Item#: 2591521
Offsets obstructions as needed. Not adjustable.
Item#: 2591405
Use to convert from round to oval vent.
Item#: 2591392
Use to increase oval vent diameter.
Item#: 2591388
Use for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B Gas Vent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters. Designed to be placed within 2" x 4" stud walls (4" and 5" oval pipe). 6" may only be placed in a 2" x 6" O.C. stud space.
Item#: 2591380
Item#: 2591364
Item#: 2591360
Item#: 2591409
Item #:
This Item Ships FREE!
$0.00
