$0.00
View All
Use to support and center Oval Tee. Use with Oval Tee Cap.
Item#: 2591409
x
Use to combine DuraConnect connectors from two or more appliances into a common vent. Additional sizes available through special order.
Item#: 2591515
Use to cap Standard Tee or Increaser Tee. Remove Tee Cap to inspect the system; clean out debris or collected condensate from the common vent. Fits on outer wall.
Item#: 2591511
Attaches smaller pipe to branch and smaller pipe to body. Use for a 90° offset or to combine connectors from two or more appliances into a common vent. Additional sizes available through special order.
Item#: 2591508
Use for a 90° offset or to combine connectors from two or more appliances into a common vent.
Item#: 2591501
Use to support the Type B Gas Vent between 16" to 24" on center joists or rafters. A Firestop Spacer is required.
Item#: 2591497
Use as a connector system to replace rigid gas vent with a flexible section. DuraConnect II can be used when Type B Gas Vent double-wall connector is required. Not to be enclosed and cannot penetrate through walls, floors, or ceilings. Twist-lock connectors on each end.
Item#: 2591448
Use with corrugated metal or tile roofs. Available in Adjustable Roof Flashing style (0/12-6/12). Made of dead soft aluminum. Refer to Roof Flashing tables for dimensions.
Item#: 2591440
Use to attach round pipe to oval pipe. Use for a 90° offset or to combine connectors from two or more appliances into a common vent. Shorter snout allows installation in tight spaces.
Item#: 2591422
Use for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B Gas Vent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters. Designed to be placed within 2" x 4" stud walls (4" and 5" oval pipe). 6" may only be placed in a 2" x 6" O.C. stud space.
Item#: 2591360
Item#: 2591364
Item#: 2591380
Use to increase oval vent diameter.
Item#: 2591388
Use to convert from round to oval vent.
Item#: 2591392
Offsets obstructions as needed. Not adjustable.
Item#: 2591405
Use to combine DuraConnect connectors from two or more appliances. Use to connect single-wall pipe or DuraConnect to common vented Type B Gas Vent.
Item#: 2591521
Use to attach round pipe to oval pipe. Use for a 90° offset or to combine connectors from two or more appliances into a common vent.
Item#: 2591418
Use to maintain a weather tight resistant seal between the pipe and the flashing.
Item#: 2591260
Use to cap Standard Tee or Increaser Tee. Remove Tee Cap to inspect the system; clean out debris or collected condensate from the common vent. Fits on inner liner.
Item#: 2591122
Use for decorative purposes. Optional.
Item#: 2591244
Use to center the oval vent where Oval Firestop Spacer is not required. (2 plates included.)
Item#: 2591530
Use to center oval vent in a minimum 16" on-center stud space. Serves as a firestop at the ceiling level. Required in multi-story installations.
Item#: 2591412
Use at every ceiling level where Square Firestop Support is not used. 3"-6" style may vary.
Item#: 2591231
Item#: 2591432
Use to close off bottom of Oval Tee. Fits on inner liner.
Item#: 2591428
Use to attach oval vent to a wall furnace.
Item#: 2591529
Item#: 2591528
Use for venting listed natural gas or liquid propane Category I, draft hood apliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B GasVent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters.
To calculate installed length, subtract 1 1/2" from each connection of vent. A 1" clearance (air space) to combustible materials must be maintained. To calculate OD add 5/8".
Item#: 2590982
Use to attach an appliance to DuraConnect connector pipe.
Item#: 2591489
Use to weather proof the penetration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For pitches of 0/12-6/12. Made of galvalume.
Item#: 2591278
Type B Gas Vent systems are to be used with natural gas or liquid propane category 1 and draft hood equipped appliances, and appliances tested and listed to use Type B Gas Vent. Applications include: natural gas fireplaces, gas-fired furnaces, boilers, water heaters and wall or space heating applications. This system uses DuraLock for a lock-tight connection to minimize heat loss and ensure a snug fit.
Item#: 2590976
Use to connect appliance or single-wall connector to vent system.
Item#: 2591154
Use to support Type B Gas Vent pipe at roof level. Can be used when DuraConnect II is installed in attic space.
Item#: 2591226
Item#: 2590989
Use to connect existing Type B Gas Vent to a listed Type B Gas Vent system manufactured by other companies. Male adapter can also be used to attach to DuraFlex AL.
Item#: 2591197
Use to add length to a straight length of Type B Vent. 12" adds 3"-10" of length, 18" adds 10"-16" of length. Requires a 2" overlap.
Item#: 2591052
Use to provide support for offsets and horizontal runs. Recommended every 4' to support vertical common vent. Use also with DuraConnect or DuraConnectc II. Wall Strap legs can be rotated 360° to conceal screw.
Item#: 2591493
Use to provide support for offsets and horizontal runs. Recommended every 4' to support vertical common vent. Use also with DuraConnect or DuraConnect II. Wall Strap legs can be rotated 360° to conceal screw.
Item#: 2591209
Use to connect Type B Gas Vent products to an existing listed Type B Gas Vent system manufactured by other companies using locking ring system.
Item#: 2591204
Use to support the Type B Gas Vent between 16" and 24" on-center joists or rafters. Use with a Draft Hood Connector to transition fitting between single-wall connector and Type B Gas Vent pipe sections. A Firestop Spacer is required.
Item#: 2591240
Required where pipe terminates above the roof line. Use for vertical installations only.
Item#: 2591326
Item#: 2590996
Offsets obstructions as needed. Elbows swivel 360° at base. 45°/60° Elbow is adjustable from 0° to 60°. Elbows must be supported when installed.
Item#: 2591079
Use to connect listed Type B Gas Vent system manufactured by other companies to existing Type B Gas Vent. For adapting to flex, see DuraFlex Female Flex Adapter.
Item#: 2591190
Provides improved performance in high wind conditions. For vertical terminations only.
Item#: 2591333
Use to support vent at ceiling level. Includes clamp that supports and prevents pipe sections from slipping down. Provides the mandatory 1" clearance to combustibles. Straps extend 16".
Item#: 2591217
Use for through-the-wall system to provide clearances for vent from combustibles. Adjusts from 3 1/2" to 6" to accomodate various wall thicknesses. Larger diameter wall thimbles are field-fabricated. See local codes for guidelines.
Item#: 2591249
Use single-wall increaser to increase vent. Additional sizes available through special order.
Item#: 2591480
Item #:
This Item Ships FREE!
$0.00
