$0.00
View All
The 8" Champion Firestop Radiation Shield is designed to protect combustible framing as chimney pipe passes through a floor and/or ceiling. Constructed of galvalume with top flanges that ensure a proper fit into the framed opening. The adjustable upper section extends from 11" to 19" to completely cover the framing.
Item#: 2522394
x
This 8" Champion Masonry Transition Plate allows you to connect Chimney Champion Class-A chimney pipe to Easy-Flex, Heavy-Flex or Rigid Liner in a masonry chimney restoration. The liner would be installed from the heating appliance to the transition anchor plate, which is mounted to the top of the masonry chimney. The chimney pipe would then be installed on top of the transition plate upward to the required height.
Item#: 2522409
Install this 8" Champion Non-Insulated Thimble when a Chimney Champion Class-A chimney pipe passed horizontally through a combustible wall. This unit is adjustable from 4" to 8" for a variety of wall thicknesses.
This unit comes with a 10" length finishing cover to go over the chimney pipe on the interior. The exterior side of the unit is satin coat black steel "ready to paint" to match the home exterior.
Item#: 2522384
This 8" Champion Non-Vented Flat Roof Flashing will allow for water to run down your roof without getting under your shingles or into your chimney system. Constructed of high quality, corrosive resistant galvalume or stainless steel it fits flat roofs. An aluminum storm collar included.
Item#: 2522449
The 8" Champion Non-Vented Formable Lead Flashing - 0/12-6/12 is to be used when the base needs to mold around an irregular surface - terra-cotta or a metal roof. Constructed of formable lead it is more formable than dead soft aluminum. A stainless steel storm collar is included.
Item#: 2522349
The 8" Champion Non-Vented Formable Lead Flashing - 7/12-12/12 is to be used when the base needs to mold around an irregular surface - terra-cotta or a metal roof. Constructed of formable lead it is more formable than dead soft aluminum. A stainless steel storm collar is included.
Item#: 2522351
This 8" Champion Non-Vented Metal Roof Flashing - 0/12-6/12 will allow for water to run down your roof without getting under your shingles or into your chimney system. Constructed of high quality, corrosive resistant galvalume or stainless steel it fits 0/12-6/12 roof pitches for metal roofs. An aluminum storm collar included.
Item#: 2522476
This 8" Champion Non-Vented Metal Roof Flashing - 7/12-12/12 will allow for water to run down your roof without getting under your shingles or into your chimney system. Constructed of high quality, corrosive resistant galvalume or stainless steel it fits 7/12-12/12 roof pitches for metal roofs. An aluminum storm collar included.
Item#: 2522479
Use this 8" Champion Non-Vented Peak Flashing when coming through the peak of the roof. No matter what the pitch is, this flashing will work for you! Constructed of high quality, corrosive resistant galvalume or stainless steel.
Item#: 2522467
This 8" Champion Non-Vented Roof Flashing - 0/12-6/12 will allow for water to run down your roof without getting under your shingles or into your chimney system. Constructed of high quality, corrosive resistant galvalumeor stainless steel it fits 0/12-6/12 roof pitches. An aluminum storm collar included.
Item#: 2522458
Use this 8" Champion Non-Vented Roof Flashing - 7/12-12/12 when coming through the peak of the roof. No matter what the pitch is, this flashing will work for you! Constructed of high quality, corrosive resistant galvalume or stainless steel.
Item#: 2522461
This 8" Champion Round Ceiling Support - 11" tall can be used on flat, cathedral or sloped ceilings. It will support up to 60' of chimney pipe from a floor or ceiling joint. A trim collar is included with every ceiling support.
Constructed of 24-gauge galvalume steel it is painted black with an included 18-gauge stainless steel faceplate that is painted black. The unique faceplate design does not rely on spot weld construction, but utilizes a secure formed edge for long term peace of mind.
Please note: In situations where the ceiling support serves as an attic insulation shield it must extend upward 10" above the attic insulation and top of the ceiling support must be closed off with a storm collar.
Item#: 2522367
This 8" Champion Round Ceiling Support - 24" tall can be used on flat, cathedral or sloped ceilings. It will support up to 60' of chimney pipe from a floor or ceiling joint. A trim collar is included with every ceiling support.
Item#: 2522368
Use the 8" Champion Round Extension - 24" tall to add length to your ceiling support. This extension telescopes inside the square ceiling support.
Item#: 2522370
This 8" Champion Square Ceiling Support - 11" tall can be used on flat, cathedral or sloped ceilings. It will support up to 60' of chimney pipe from a floor or ceiling joint. A trim collar is included with every ceiling support.
Item#: 2522357
This 8" Champion Square Ceiling Support - 24" tall can be used on flat, cathedral or sloped ceilings. It will support up to 60' of chimney pipe from a floor or ceiling joint. A trim collar is included with every ceiling support.
Item#: 2522358
Use the 8" Champion Square Extension - 24" tall to add length to your ceiling support. This extension telescopes inside the square ceiling support.
Item#: 2522360
Use the 8" Champion Square Storm Collar when the square ceiling support is used as an attic insulation shield.
Item#: 2522362
The 8" Champion Square Trim Plate is for a flat ceiling only.
Item#: 2522364
Use the 8" Champion Stainless Steel Pipe End Cap when installing Chimney Champion Class-A chimney pipe under a stone slate or other custom shroud. The pipe end cap closes off the top section of pipe to keep moisture from contacting the insulation.
Item#: 2522300
Use the 8" Champion Stainless Steel Spark Arrestor Screen to install into any Chimney Champion cap - some states and regions require its use.
Item#: 2522302
The 8" Champion Stainless Steel Storm Collar seals the inner edge that contacts the chimney pipe with silicone sealant. This storm collar is to be used with roof flashing and attic insulation shields.
Item#: 2522304
Use the 8" Champion Stainless Steel Wall Stand-Off in conjunction with the Tee Support to stabilize the chimney. This unit is not made to provide vertical, weight-bearing support. The Tee Support will provide all the vertical, weight-bearing support that you need. When installing the 8" Champion Stainless Steel Wall Stand-Off every 8 feet it will provide lateral support and will adjust 2" to 6" form the structure.
Item#: 2522405
This 8" Champion Tee Support is an optional way to support your exterior installation. This Tee Support provides 2"-5" of adjustment and supports 60' of chimney.
Item#: 2522494
The 8" Champion Thimble Cover Plate is a simple no-nonsense solution to an exposed chimney pipe! This cover plate will cover the exterior side of the wall thimble and will match the chimney pipe!
Item#: 2522386
Add the 8" Champion Thimble Extension for unique installs.
Item#: 2522385
Use this 8" Champion Universal Adapter to adapt from Class-A to single or double wall black connector pipe. It is needed for all wall thimbles and ceiling supported installations. Constructed of 316L stainless steel and painted black for a seamless transition.
Item#: 2522388
This 8" Champion Vented Flat Roof Flashing will allow for water to run down your roof without getting under your shingles or into your chimney system. Constructed of high quality, corrosive resistant galvalume or stainless steel it fits flat roofs. An aluminum storm collar included.
Item#: 2522425
Use this 8" Champion Vented Peak Flashing when coming through the peak of the roof. No matter what the pitch is, this flashing will work for you! Constructed of high quality, corrosive resistant galvalume or stainless steel.
Item#: 2522443
This 8" Champion Vented Roof Flashing - 0/12-6/12 will allow for water to run down your roof without getting under your shingles or into your chimney system. Constructed of high quality, corrosive resistant galvalume or stainless steel it fits 0/12-6/12 roof pitches. An aluminum storm collar included.
Item#: 2522434
This 8" Champion Vented Roof Flashing - 7/12-12/12 will allow for water to run down your roof without getting under your shingles or into your chimney system. Constructed of high quality, corrosive resistant galvalume or stainless steel it fits 7/12-12/12 roof pitches. An aluminum storm collar included.
Item#: 2522437
This Champion Extended Wall Support will allow you to avoid cutting through or offsetting an eave. This support provides up to 14" of adjustment off of the vertical structure. This provides both vertical and lateral support when installed every 8 feet.
Item#: 2522488
Keep this Champion Hardware Pack on hand for installations and repairs. This mixed hardware pack has a variety of nuts, bolts, washers and screws.
Item#: 2522395
The Champion Stainless Steel Low Pitch Snow Wedge is especially important for snow diversion on metal roofs. Recommended for a low pitch - 4/12-6/12.
Item#: 2522352
The Champion Stainless Steel Medium Pitch Snow Wedge is especially important for snow diversion on metal roofs. Recommended for a medium pitch - 7/12-10/12.
Item#: 2522353
This Champion Stainless Steel Roof Support is designed to provide support for the chimney pipe at the roof line. You can use the support to extend chimney pipe below a cathedral ceiling, above an offset, when exceeding the weight limit of the primary support and/or to provide additional stability to any installation. This support adjusts easily to any roof pitch and fits pipe diameters of 5", 6", 7" and 8".
Item#: 2522305
The Champion Stainless Steel Steep Pitch Snow Wedge is especially important for snow diversion on metal roofs. Recommended for a steep pitch - 10/12-12/12.
Item#: 2522354
The Champion Standard Wall Support is for use on wall pass thru installations. The wall support provides both vertical load bearing and lateral support. The first wall support is fastened to the first chimney length as a base support and then at a minimum of every 8 feet on chimney sections above. The support provides up to 4" of adjustment in or out from the vertical structure. This support fits pipe diameters of 5", 6", 7" and 8".
Item#: 2522485
The Champion Telescoping Roof Brace will brace the chimney when it extends more than 5' above the roof. This brace adjusts from 5'-9'. The mounting brackets adjust easily to any roof pitch and fits pipe diameters of 5", 6", 7" and 8".
Item#: 2522482
Item #:
This Item Ships FREE!
$0.00
