Champion Chimney System Parts

The 6" Champion Non-Vented Formable Lead Flashing - 7/12-12/12 is to be used when the base needs to mold around an irregular surface - terra-cotta or a metal roof. Constructed of formable lead it is more formable than dead soft aluminum. A stainless steel storm collar is included.

The 6" Champion Non-Vented Formable Lead Flashing - 0/12-6/12 is to be used when the base needs to mold around an irregular surface - terra-cotta or a metal roof. Constructed of formable lead it is more formable than dead soft aluminum. A stainless steel storm collar is included.

This 6" Champion Non-Vented Flat Roof Flashing will allow for water to run down your roof without getting under your shingles or into your chimney system. Constructed of high quality, corrosive resistant galvalume or stainless steel it fits flat roofs. An aluminum storm collar included.

Install this 6" Champion Non-Insulated Thimble when a Chimney Champion Class-A chimney pipe passed horizontally through a combustible wall. This unit is adjustable from 4" to 8" for a variety of wall thicknesses.

This unit comes with a 10" length finishing cover to go over the chimney pipe on the interior. The exterior side of the unit is satin coat black steel "ready to paint" to match the home exterior.

This 6" Champion Masonry Transition Plate allows you to connect Chimney Champion Class-A chimney pipe to Easy-Flex, Heavy-Flex or Rigid Liner in a masonry chimney restoration. The liner would be installed from the heating appliance to the transition anchor plate, which is mounted to the top of the masonry chimney. The chimney pipe would then be installed on top of the transition plate upward to the required height.

The 6" Champion Firestop Radiation Shield is designed to protect combustible framing as chimney pipe passes through a floor and/or ceiling. Constructed of galvalume with top flanges that ensure a proper fit into the framed opening. The adjustable upper section extends from 11" to 19" to completely cover the framing.

Use the 6" Champion Finishing Cover - 36" length to create a finished look on the end of exposed or visible chimney pipe that extends below your ceiling. Install the universal adapter onto the chimney pipe, then attached the cover and fasten the pipe to the appliance. This cover can be used to cover the entire exposed pipe on a ceiling supported installation or can be used to cover longer than usual exposed pipe running through a wall pass-thru.

Use the 6" Champion Finishing Cover - 2.5" length to create a finished look on the end of exposed or visible chimney pipe that extends below your ceiling. Install the universal adapter onto the chimney pipe, then attached the cover and fasten the pipe to the appliance.

The 6" Champion Attic Insulation Shield Extension will extend your insulation shield as it passes through an unoccupied attic.

The 6" Champion Attic Insulation Shield will keep insulation and/or other combustible materials from contacting the chimney pipe with is passes through an unoccupied attic.

Constructed of galvalume with bottom flanges that ensure a proper fit into the framed opening. A storm collar is included.

This 6" Champion Anchor Plate is used to attach Chimney Champion Class-A chimney pipe to a masonry fireplace and to certain types of heaters. Designed for masonry or factory built fireplaces 10" x 10".

This 6" Champion 430 Stainless Steel Wood Style Rain Cap has more open screening than the standard rain cap. This is a good choice to provide some pest protection with less creosote buildup issues. The quick connect clamps make it easy to access to clean or inspect. Made of 430 stainless steel it will hold up to the weather and emissions of your fireplace or stove.

This 6" Champion 430 Stainless Steel Wide Open Rain Cap is the ultimate cap for solid fuel installations with creosote clogging issues. The quick connect clamps make it easy to access to clean or inspect. Made of 430 stainless steel it will hold up to the weather and emissions of your fireplace or stove.

This 6" Champion 430 Stainless Steel Standard Rain Cap is a sleek looking cap that you can be proud to install. The quick connect clamps make it easy to access to clean or inspect. Made of 430 stainless steel it will hold up to the weather and emissions of your fireplace or stove.

This 6" Champion 316L Stainless Steel Wood Style Rain Cap has more open screening than the standard rain cap. This is a good choice to provide some pest protection with less creosote buildup issues. The quick connect clamps make it easy to access to clean or inspect. Made of 316L stainless steel it will hold up to the weather and emissions of your fireplace or stove and will compliment your Class-A chimney pipe.

This 6" Champion 316L Stainless Steel Wind Directional Rain Cap will solve your wind related down draft problems! The design of this cap is a prove solution and is ready to connect to your Chimney Champion Class-A chimney pipe.

Made of 316L stainless steel it will hold up to the weather and emissions of your fireplace or stove and will compliment your Class-A chimney pipe. This is a no screen cap.

This 6" Champion 316L Stainless Steel Wide Open Rain Cap is the ultimate cap for solid fuel installations with creosote clogging issues. The quick connect clamps make it easy to access to clean or inspect. Made of 316L stainless steel it will hold up to the weather and emissions of your fireplace or stove and will compliment your Class-A chimney pipe.

The 6" Champion 316L Stainless Steel Tee with Cover is located at the base of the chimney and can be installed on the interior or exterior of a structure. With a deep bottom reservoir, you won't need an extra section of pipe when using a tee support assembly to attach the tee cover. With an included tee cover it is easier to remove with one nut driver connection making it a simple task to clean and inspect!

The 6" Champion 316L Stainless Steel Tee Cover is now easier to install and remove with just a one nut driver connection. This cover is child-proof. The easy removal will make cleaning and inspection a simple task.

This 6" Champion 316L Stainless Steel Standard Rain Cap is a sleek looking cap that you can be proud to install. The quick connect clamps make it easy to access to clean or inspect. Made of 316L stainless steel it will hold up to the weather and emissions of your fireplace or stove and will compliment your Class-A chimney pipe.

The 6" Champion 316L Stainless Steel Chimney Pipe - 6" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 316L alloy with .016 thickness and can be used with standard solid-fuel, oil and coal applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 316L Stainless Steel Chimney Pipe - 48" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 316L alloy with .016 thickness and can be used with standard solid-fuel, oil and coal applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 316L Stainless Steel Chimney Pipe - 36" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 316L alloy with .016 thickness and can be used with standard solid-fuel, oil and coal applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 316L Stainless Steel Chimney Pipe - 24" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 316L alloy with .016 thickness and can be used with standard solid-fuel, oil and coal applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 316L Stainless Steel Chimney Pipe - 18" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 316L alloy with .016 thickness and can be used with standard solid-fuel, oil and coal applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 316L Stainless Steel Chimney Pipe - 12" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 316L alloy with .016 thickness and can be used with standard solid-fuel, oil and coal applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

This 6" Champion 30º 316L Stainless Steel Elbow Kit is used to offset obstructions such as framing joists. This kit comes complete with two elbows and an offset/elbow support.

The offset/elbow support is required to be used between the two elbows to support the chimney weight created by the offset and/or can be used when the chimney exceeds the weight limit of the primary support. The straps are 36" long and fit pipe diameters of 5", 6", 7" and 8".

This 6" Champion 30º 304L Stainless Steel Elbow Kit is used to offset obstructions such as framing joists. This kit comes complete with two elbows and an offset/elbow support.

The offset/elbow support is required to be used between the two elbows to support the chimney weight created by the offset and/or can be used when the chimney exceeds the weight limit of the primary support. The straps are 36" long and fit pipe diameters of 5", 6", 7" and 8".

This 6" Champion 304L Stainless Steel Wind Directional Rain Cap will solve your wind related down draft problems! The design of this cap is a prove solution and is ready to connect to your Chimney Champion Class-A chimney pipe.

Made of 304L stainless steel it will hold up to the weather and emissions of your fireplace or stove and will compliment your Class-A chimney pipe. This is a no screen cap.

The 6" Champion 304L Stainless Steel Tee with Cover is located at the base of the chimney and can be installed on the interior or exterior of a structure. With a deep bottom reservoir, you won't need an extra section of pipe when using a tee support assembly to attach the tee cover. With an included tee cover it is easier to remove with one nut driver connection making it a simple task to clean and inspect!

The 6" Champion 304L Stainless Steel Tee Cover is now easier to install and remove with just a one nut driver connection. This cover is child-proof. The easy removal will make cleaning and inspection a simple task.

The 6" Champion 304L Stainless Steel Chimney Pipe - 6" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 304L alloy with .016 thickness and can be used with standard solid-fuel applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 304L Stainless Steel Chimney Pipe - 48" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 304L alloy with .016 thickness and can be used with standard solid-fuel applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 304L Stainless Steel Chimney Pipe - 36" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 304L alloy with .016 thickness and can be used with standard solid-fuel applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 304L Stainless Steel Chimney Pipe - 24" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 304L alloy with .016 thickness and can be used with standard solid-fuel applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 304L Stainless Steel Chimney Pipe - 18" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 304L alloy with .016 thickness and can be used with standard solid-fuel applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

The 6" Champion 304L Stainless Steel Chimney Pipe - 12" length is a superior chimney pipe with a secure hardware fastening system, smooth-weld technology and precision end forming for a better fit. The inner wall of this pipe is construction of 304L alloy with .016 thickness and can be used with standard solid-fuel applications. The outer wall is 430 alloy with a .016 thickness.

This chimney pipe reduced heat transfer to the exterior wall and allows for thermal bridging between your pipe sections.

This pipe has been tested and is UL103HT listed. When installing this pipe it requires a 2" clearance to combustibles. This pipe carries a warranty like no other - it is covered for the lifetime of the original homeowner and is transferable to the next homeowner - make it the best in the industry!

This 6" Champion 15º 316L Stainless Steel Elbow Kit is used to offset obstructions such as framing joists. This kit comes complete with two elbows and an offset/elbow support.

The offset/elbow support is required to be used between the two elbows to support the chimney weight created by the offset and/or can be used when the chimney exceeds the weight limit of the primary support. The straps are 36" long and fit pipe diameters of 5", 6", 7" and 8".

This 6" Champion 15º 304L Stainless Steel Elbow Kit is used to offset obstructions such as framing joists. This kit comes complete with two elbows and an offset/elbow support.

The offset/elbow support is required to be used between the two elbows to support the chimney weight created by the offset and/or can be used when the chimney exceeds the weight limit of the primary support. The straps are 36" long and fit pipe diameters of 5", 6", 7" and 8".