Chimney Cap Accessories

The The Smoke Assassin Draft Inducerresembles a thick steel spatula. It eliminates the smoking problems associated with a cold chimney, or starting a fire that doesn’t provide sufficient updraft.

Prior to starting a fire, simply heat the Smoke Assassin on a kitchen range for around 9 minutes on the high setting. Then place the preheated Smoke Assassin beneath the fire grate. The holes and handle allow for easy transfer of the Smoke Assassin from the stove to the fireplace.

The Smoke Slayer Draft Inducer is designed for use with manufactured fire starting logs. It can be pre heated on a cook top or in a stove.

The Smoke Slayer offers support of the log and provides chimney updraft for the beginning fire’s smoke. The Smoke Slayer also retains the hot embers in the firebox as the burning log falls apart, providing an additional layer of safety.

Use the Lock-Top Installation Cable Pack with 3oz Silicone for an initial damper cable install or for re-installation. This pack has everything you need for a damper cable installation.

Items Included:

• Spring Handle Asssembly
• Keyhole Bracket
• Two Nail Anchors
• Allen Wrench
• Adhesive
• 30' Cable
• Conduit Assembly
• Cotter Pin

Due to restrictions of the shipping company, expedited shipping is not available for this product.

The Fire Qube Draft Inducer - Set of 3 resemble large steel ice cubes. These steel cubes can eliminate smoke problems due to a diminishing fire’s lack of sufficient updraft.

Fire Qubes can be scattered around the rear of your fire grate to absorb heat from the fire. The steel cubes remain very hot and radiates for hours, providing updraft as your fire dies out. These FireQubes are packaged in sets of 3 cubes per box.

The Draft Bars Draft Inducer - Set of 3 combine the features of two other draft induction products, the Smoke Assassin and the FireQubes. Individual sections of the assembly can be pre heated on your stove.

The heavy steel construction means that this product will retain heat for hours after a fire is burning, maintaining updraft convection as the fire burns down. Additionally, Draft bars can be used as a simple fireplace grate and can be used to support an existing grate.

Simply set up the Draft Bars inside the firebox, preferably in the center and towards the back. Place the first Draft Bar in the back and the side bars in the interlocking position. To preheat, clean one of the sidebars of any excess soot or ash and pre heat in the oven. Using a high temperature glove, place the bar back into position, and you are ready to have a smoke free fire.