$0.00
View All
The mortar collar is great when you are not using a tee connector but must past through a thimble. Just slide this over the liner, bend the liner at the thimble and mortar this collar in place.
Item#: 2520504
x
The perfect end to your chimney liner system. Our Tee Caps always match the liner metal quality and they always fit.
Item#: 2520403
Lining in a space starved flue? Then this liner coupling may do the trick. It must be screwed or siliconed to the liner and is not dripless but it's double male connection is seamlessly butt welded to ensure a tight fit.
Item#: 2520475
Use the Drip Tee Kit for high efficiency appliance chimney systems. The drip kit helps condensation dissipate by providing a drain at the tee cap. If you order this at the same time as your tee cap we can even pre drill the tee cap to accept the drip kit. Just specify if you want the Drip Kit on the bottom or side of the tee cap.
Item#: 2520443
Item#: 2529998
This AL29-4C Tee Cap mates with our AL29-4C Quick Tee to provide a strong bottom termination to your liner system.
Item#: 2520751
The Pulling tee cap works wonders. Just connect it to your liner system. Pull the liner through the chimney by attaching rope to the pulling tee cap and once the liner is in place just leave the tee cap on. Nothing could be simpler.
Item#: 2520419
This dripless female to male connector is great for connecting round stainless flex to almost anything.
Item#: 2520459
The Appliance Connector mates directly to your Easy Flex Liner. It uses our quick connect system to tighten easily onto the chimney liner. The other end of the connector is designed to mate directly to the appliance or smokepipe. It has a perfectly round fit thanks the the smooth weld technology.
Item#: 2520349
The Leak-Stopper - Top Plate - 13"x13" has corrugated support ridges to prevent any sagging of the chimney liner system. The top plate fills two needs in a chimney liner system.
The top plate mounts the liner system to your roof or chimney. This supports the weight of the liner system and helps keep the system secure in high winds. The top plate also acts as flashing to help protect your roof or chimney from the dangerous effects of invading water.
Each of our top plates are backed by our Lifetime Warranty. As well as being backed by our skilled technical sales staff. Just give us a call and we will help you plan your chimney lining project.
Item#: 2520192
The Flat Top Plate - 13"x13" has been designed to provide strong support for your chimney liner and be easy to work with.
Item#: 2520222
The Rigid Liner (AL 29-4C) - 2' Section is available in 4 standard diameters. If you need this rigid liner in a differnet diameter than 5",6",7", or 8" then give us a call and we can have one custom made for you
Item#: 2520803
This connectors male end slips into a tee snout and will telescope from 4" to 16". There's no need to cut this connector!
Item#: 2520491
Designed to fit our Al29-4C Easy Flex Liner
Item#: 2520777
Use the Universal Gas Take-Off to connect a hot water heater above an appliance. Make a hole in the Easy Flex liner with a hole saw in your drill. Be sure to set the drill to reverse. Then set the the seal with high temp Mill Pac Black sealant.
Item#: 2520513
The Leak-Stopper - Top Plate - 13"x18" has corrugated support ridges to prevent any sagging of the chimney liner system. The top plate fills two needs in a chimney liner system.
Item#: 2520202
The Free Flow Reducer/Increaser 316L is the best reducer/increaser in the industry. The air flow through an Easy Flow is much less turbulent and this allows the smoke to travel through the liner system more easily and efficiently.
The Easy Flow design is not available on the 7”-4”, 8”-4”, 8”-5”, or the 9”-6”.
And they are backed by our Chimney Champion Lifetime warranty. Also for help planning your relining project give our technical sales team a call.
Item#: 2520563
The Quick Cap without Screen mates directly to your Easy Flex Liner. The Chimney Champion quick connection system ensures a strong and tight fit between the cap and the liner. By simply tightening the steel connection strap you have a strong and clean connection without the use of screws that pierce the liner.
Caps are an essential part to any Chimney Lining system. The help prevent the elements from entering your chimney and potentially causing corrosion or even chimney blockage. This cap features a rain guard to help prevent rain from entering your chimney system.
Each of our Fast Caps are backed by our Lifetime Warranty. As well as being backed by our skilled technical sales staff. Just give us a call and we will help you plan your chimney lining project.
Item#: 2520166
The Flat Top Plate - 13"x18" has been designed to provide strong support for your chimney liner and be easy to work with.
Item#: 2520232
The Leak-Stopper - Top Plate - 18"x18" has corrugated support ridges to prevent any sagging of the chimney liner system. The top plate fills two needs in a chimney liner system.
Item#: 2520212
Item#: 2529999
The Elbow - 45 Degree - Adjustable has laser welded seams for smooth adjusting. These elbows have a female end to accept the flex liner. They also feature the quick band connection system. This ensures a tight fit with our Easy Flex liner.
Item#: 2520543
The Elbow - 30 Degree has laser welded seams for smooth adjusting. These elbows have a female end to accept the flex liner. They also feature the quick band connection system. This ensures a tight fit with our Easy Flex liner.
Item#: 2520533
The Elbow - 15 Degree has laser welded seams for smooth adjusting. These elbows have a female end to accept the flex liner. They also feature the quick band connection system. This ensures a tight fit with our Easy Flex liner.
Item#: 2520523
The Flat Top Plate - 18"x18" has been designed to provide strong support for your chimney liner and be easy to work with.
Item#: 2520242
The Elbow - 90 Degree - Adjustable has laser welded seams for smooth adjusting. These elbows have a female end to accept the flex liner. They also feature the quick band connection system. This ensures a tight fit with our Easy Flex liner.
Item#: 2520553
The Quick Cap With Screen mates directly to your Easy Flex Liner. The Chimney Champion quick connection system ensures a strong and tight fit between the cap and the liner. By simply tightening the steel connection strap you have a strong and clean connection without the use of screws that pierce the liner.
Caps are an essential part to any Chimney Lining system. The help prevent the elements from entering your chimney and potentially causing corrosion or even chimney blockage. This cap has both a mesh screen to stop animal incursions and a storm guard to help prevent the wind from blowing rain under the rain guard.
Item#: 2520150
The California Cap - 5/8" Mesh Screen mates directly to your Easy Flex Liner. The Chimney Champion quick connection system ensures a strong and tight fit between the cap and the liner. By simply tightening the steel connection strap you have a strong and clean connection without the use of screws that pierce the liner.
Caps are an essential part to any Chimney Lining system. The help prevent the elements from entering your chimney and potentially causing corrosion or even chimney blockage. This cap has both a mesh screen to stop animal incursions and a storm guard to help prevent the wind from blowing rain under the rain guard. This cap meets the California fire code regulations for using 5/8in mesh.
Item#: 2520182
Looking for a slick way to transition from a liner to the fireplace smoke chamber? We have answered the call by providing a Mesh Bottom Plate. The Bottom Plate can be molded and mortared to allow for a perfect finish. It also features a quick connect band to ensure a fast and secure connection to our Easy Flex Liner.
Item#: 2520518
When you need extra strength to pull you liner thorugh an especially crooked or bent chimney pathway then the pulling tee cap will meet the challenge. It attaches to our Easy Liner with its quick band system. It features a strong eye hook for a secure rope connection and a conical shape to guide the liner through any tough turns.
Item#: 2520427
The Terra-Cotta - Top Plate - 8"x8" mounts to Terra Cotta flue tiles. This top plate grips the flue tiles with its pressure screws for a tight and secure mounting solution.
Item#: 2520259
The Flue Extender is designed to give you the extra height sometimes needed to clear obstacles by your chimney flue. The Flue Extender provides 18” of extra height to your flue.
Item#: 2520297
The Terra-Cotta - Top Plate - 8"x13" mounts to Terra Cotta flue tiles. This top plate grips the flue tiles with its pressure screws for a tight and secure mounting solution.
Item#: 2520265
The 22" Tee take-off is used to pass through especially thick walls. You may need this if your liner has to connect to an appliance behind a mesonry chimney and a regular home wall.
Item#: 2520383
The Elbow - 90 Degree - Adjustable (AL 29-4C) has laser welded seams for smooth adjusting. These elbows have a female end to accept the flex liner. They also feature the quick band connection system. This ensures a tight fit with our Easy Flex liner.
Item#: 2520793
The Terra-Cotta - Top Plate - 13"x13" mounts to Terra Cotta flue tiles. This top plate grips the flue tiles with its pressure screws for a tight and secure mounting solution.
Item#: 2520271
The Quick Tee Removable Take-Off connects directly to your Easy Flex liner using the quick band system. By tightening the quick band you gain a strong and secure connection to the chimney liner. This tee features a removable 10” snout.
And it is backed by our Chimney Champion Lifetime warranty. Also for help planning your relining project give our technical sales team a call.
Item#: 2520359
The Terra-Cotta - Top Plate - 13"x18" mounts to Terra Cotta flue tiles. This top plate grips the flue tiles with its pressure screws for a tight and secure mounting solution.
Item#: 2520284
The Quick Tee Removable Take-Off (AL 29-4C) connects directly to your Easy Flex liner using the quick band system. By tightening the quick band you gain a strong and secure connection to the chimney liner. This tee features a removable 10” snout.
Made to match out AL29-4C Easy Flex Liner
Item#: 2520735
The Flat Top Plate - 24"x24" has been designed to provide strong support for your chimney liner and be easy to work with.
Item#: 2520256
The Chimney Champion Crown Mount Cap - 8"x8" mates directly to your Easy Flex Liner. The Chimney Champion quick connection system ensures a strong and tight fit between the cap and the liner. By simply tightening the steel connection strap you have a strong and clean connection without the use of screws that pierce the liner.
The count mount caps have a top plate built in. The cap is connected to the built in top plate via a hinge and catch system. This allows for easy cleaning of your chimney liner system. The built in top plate is mounted to your roof or chimney via screws.
Caps are an essential part to any Chimney Lining system. The help prevent the elements from entering your chimney and potentially causing corrosion or even chimney blockage. This cap has both a mesh screen to stop animal incursions and a rain guard to help prevent the wind from blowing rain into the chimney system.
This cap is backed by our Lifetime Warranty. As well as being backed by our skilled technical sales staff. Just give us a call and we will help you plan your chimney lining project.
Item#: 2520305
The Short Body Tee (includes Tee Cap) connects directly to your Easy Flex liner using the quick band system. By tightening the quick band you gain a strong and secure connection to the chimney liner. This tee features a removable 10” snout, a built in tee cap, and is designed to fit in a constricted thimble.
Item#: 2520391
The Short Body Tee with 22" Take Off connects directly to your Easy Flex liner using the quick band system. By tightening the quick band you gain a strong and secure connection to the chimney liner. This tee features a removable 22” snout, a built in tee cap, and is designed to fit in a constricted thimble.
Item#: 2520399
The Quick Tee with 22" Take-Off connects directly to your Easy Flex liner using the quick band system. By tightening the quick band you gain a strong and secure connection to the chimney liner. This tee features a removable 22” snout.
Sizing:
Item#: 2520375
The Chimney Champion Crown Mount Cap - 8"x13" mates directly to your Easy Flex Liner. The Chimney Champion quick connection system ensures a strong and tight fit between the cap and the liner. By simply tightening the steel connection strap you have a strong and clean connection without the use of screws that pierce the liner.
Item#: 2520311
The Chimney Champion Terra Cotta Mount Cap - 8"x8" mates directly to your Easy Flex Liner. The Chimney Champion quick connection system ensures a strong and tight fit between the cap and the liner. By simply tightening the steel connection strap you have a strong and clean connection without the use of screws that pierce the liner.
The Terra Cotta mount caps use pressure screws to mate with your chimney flue. This provides a reliable fit to your chimney tile. You do not need a top plate with this chimney cap as it is built in. The cap is connected to the built in top plate via a hinge and catch system. This allows for easy cleaning of your chimney liner system.
Item#: 2520327
The Chimney Champion Crown Mount Cap - 13"x13" mates directly to your Easy Flex Liner. The Chimney Champion quick connection system ensures a strong and tight fit between the cap and the liner. By simply tightening the steel connection strap you have a strong and clean connection without the use of screws that pierce the liner.
Item#: 2520317
The Chimney Champion Terra Cotta Mount Cap - 8"x13" mates directly to your Easy Flex Liner. The Chimney Champion quick connection system ensures a strong and tight fit between the cap and the liner. By simply tightening the steel connection strap you have a strong and clean connection without the use of screws that pierce the liner.
Item#: 2520333
Item #:
This Item Ships FREE!
$0.00
