$0.00
View All
Kit Includes:
DirectVent is an unitized, coaxial venting system designed for use with direct vent gas or propane stoves, heaters and fireplaces. The features include tight inner connections for superb performance , with no gaskets or sealant required (unless specified by appliance manufacturer).
FREE SHIPPING on orders $99 & up
Item#: 2590963
x
Item#: 2590964
Kit includes Termination Connector and Flashing. DirectVent Pro 4" x 6 5/8" Termination Caps, 3" Flex, and Co-Linear Flex Connectors are sold separately.
DirectVent Pro chimney liner termination kit must be tested and listed for each appliance. Refer to stove manufacturer's installation instructions.
Item#: 2590965
Kit includes Cap Adapter and 18" x 18" Flashing. Kit is for 4" x6 5/8" DirectVent. Termination Cap and 4" Flex are sold separately.
Use existing masonry chimney. Route the exhaust gases and intake air through the side of the masonry chimney.
Item#: 2590967
Kit is for 4" x6 5/8" DirectVent. Termination Cap and 4" Flex are sold separately.
Item#: 2590968
Kit includes Cap Adapter and a Retro Connector. DirectVent Pro 4" x 6 5/8" Termination Cap and 4" Flex are sold separately.
Use with 4" x 6 5/8" DirectVent gas stoves. Use existing through-the-ceiling, wood-stove metal chimney. Route the exhaust gases and intake air through the existing wood-stove metal chimney.
Item#: 2590969
Item#: 2590970
Item#: 2590971
Use with through-the-wall termination cap where high winds are present. Also use as a safety heat shield to prevent children or others from coming into contact with the vent termination cap. Fits both 4" x 6 5/8" and 5" x 8" terminations.
Item#: 2590973
Attaches to appliance outlet allowing pipe to easily connect or disconnect. For Vermont Castings appliances.
Item#: 2590974
Use as a flex connector with inserts with 3" co-linear intake and exhaust ports.
Item#: 2590975
Designed for appliances tested and listed for DirectVent. Features a fully unitized twist-lock construction in both 4" x 6 5/8" and 5" x 8" vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1 1/2" for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.
Item#: 2590785
Item#: 2590802
Use to add length to a straight length of DirectVent Pro. 8 1/2" pipe adds 3"-7" of length, 16" pipe adds 3"-14 1/2" of length, when used with rigid sections of pipe. DirectVent lengths feature a fully unitized, twist-lock construction. Use of sealant is optional, unless specified by the appliance manufacturer. Also available in black (both feature laser-welded outer wall seams). Does not fit DirectVent GS pipe.
Item#: 2590819
Use to add length to a straight length of DirectVent Pro. 8 1/2" pipe adds 3"-7" of length, 16" pipe adds 3"-14 1/2" of length, when used with rigid sections of pipe. DirectVent lengths feature a fully unitized, twist-lock construction. Use of sealant is optional, unless specified by the appliance manufacturer. Also available in galvalume (both feature laser-welded outer wall seams). Does not fit DirectVent GS pipe.
Item#: 2590824
Used to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 45°.
Item#: 2590829
Item#: 2590832
Used to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 90°.
Item#: 2590835
Item#: 2590838
Use for supporting vent pipe between offsets.
Item#: 2590841
Use as a decorative cover for horizontal (through-wall) installations or for flat ceiling installations. Fits over the Wall Thimble face plate. Comes with an insulation ring to reduce air infiltration where the pipe slips through the thimble.
Item#: 2590844
Use to pass through ceiling and support pipe. May be used on vaulted or flat ceilings. Trim and clamp included.
Item#: 2590847
Provides a complete wall-pass-through and firestop. Use with Square Horizontal Cap only. May be required in Canada. Refer to the appliance manufacturer's installation instructions for requirements.
Item#: 2590850
Provides a complete wall-pass-through and firestop. Use with Round Horizontal Cap and Sconce Cap only. May be required in Canada. Refer to the appliance manufacturer's installation instructions for requirements.
Item#: 2590853
Provides a complete wall-pass-through and interior firestop. Features an adjustable sleeve for an exact fit. Eliminates visible trim on exterior or wall near cap. Sized to fit all DirectVent Pro termination caps.
Item#: 2590856
For horizontal (through-wall) installations. Refer to the appliance manufacturer's installation instructions for requirements.
Item#: 2590859
Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and/or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (i.e.: ship lap siding, shake shingle siding) so cap is not embedded in the siding. Sized for Square Horizontal Cap.
Item#: 2590862
Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and/or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (i.e.: ship lap siding, shake shingle siding) so cap is not embedded in the siding. Kit includes 4 pieces; sized for Square Horizontal Cap only.
Item#: 2590865
Use as a heat shield on structures with vinyl siding, or other temperature sensitive materials, to help prevent warping and/or melting of the material. Use only on horizontal terminations and on any irregular surfaced siding (i.e.: ship lap siding, shake shingle siding) so cap is not embedded in the siding. Kit includes 4 pieces; sized for Sconce Cap and Round Horizontal Cap only.
Item#: 2590872
Prevents water intrusion into stucco-sided homes. Allows the installer to apply siding material (i.e.: stucco, brick, etc) over the flanges up to the sides of the flashing for a water-tight seal. Kit includes 4 pieces; sized for Square Horizontal Cap only.
Item#: 2590876
Required for multi-story vertical installations at the second floor and any subsequent floors. 4" x 6 5/8" style may vary.
Item#: 2590882
Required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent. Provides 1" clearance to combustibles.
Item#: 2590885
Use to support vent pipe. Provides 1" clearance. Recommend installing Wall Straps at 4-foot intervals on vertical runs.
Item#: 2590888
Use only in accordance with specific appliance manufacturer's installation instructions to restrict incoming combustion air.
Item#: 2590891
Use to weatherproof the pentration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of the roof. For pitches of 0/12 - 6/12.
Item#: 2590894
Use to weatherproof the pentration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of the roof. For pitches of 7/12 - 12/12.
Item#: 2590897
Use to weatherproof the pentration of vent pipe through the roof. Storm Collar required. Use on flat roofs, chase enclosures, or masonry chimney.
Item#: 2590900
Use with corrugated metal or tile roofs. Available in sizes 4" x 6 5/8" and 5" x 8". Made of dead soft aluminum.
Item#: 2590903
Item#: 2590906
Use to maintain a weather tight resistant seal between the pipe and the flashing.
Item#: 2590909
Use for through-the-wall terminations. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Check with appliance manufacturer for approval.
Item#: 2590912
Use for through-the-wall terminations. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Check with appliance manufacturer for approval. Patented.
Item#: 2590915
Use for through-the-wall terminations. Provides improved performance in high wind conditions. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors. Check with appliance manufacturer for approval. Patented.
Item#: 2590922
Use for standard and high-wind through-the-wall terminations. Check installation instructions for restrictions on horizontal cap terminations, such as minimum distance from windows and doors.
Item#: 2590929
Use for horizontal through-the-wall terminations when a vertical rise is desired in the system to meet appliance manufacturer recommended minimum heights. Do not enclose in the wall or install below grade. Patented.
Item#: 2590936
Item#: 2590939
Use for horizontal through-the-wall terminations. Provides improved performance in high wind conditions. For vertical terminations only.
Item#: 2590942
Use for vertical terminations only. Check the appliance manufacturer's instructions to determine which caps are approved for use with their appliance.
Item#: 2590945
Free Shipping on orders $99 & up!
Item #:
$0.00
