DuraTech Chimney System Parts

Conceals gap between chimney pipe and ceiling cut out when used with Roof Support.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with zero-clearance fireplace manufacturer to ensure DuraTech Chimney is approved for use on fireplace.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to prevent excessive weight on the elbows by supporting the weight of the chimney. Required to be installed between two elbows in offset installations. Multiple elbow straps may be required for offset installations. Refer to installation instructions.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Connects gas or oil-burning appliance to DuraTech Chimney. Tee cap included. Maintain 18" clearance (air space) to combustible materials. Bottom tee section swivels. No adapter is needed to connect this to the support box.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to prevent excessive weight on the elbows by supporting the weight of the chimney. Required to be installed between two elbows in offset installations. Multiple elbow straps may be required for offset installations. Refer to installation instructions.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. Supports up to 60 feet of DuraTech Chimney. Use adapter to attach DVL or DuraBlack to the support box. Trim Collars sold separately.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Designed to support the DuraTech chimney and allows the chimney to pass through the roof and extend down from the ceiling. Ideal for cathedral ceilings and free-standing fireplace installations.Supports up to a maximum total chimney length of 45 feet above and 20 feet chimney below Roof Support. Adjustable to different roof pitches. Use Finishing Collar and adapter to attach DVL or DuraBLack to the DuraTech chimney. Trim Collar not included.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. Supports up to 60 feet of DuraTech Chimney. Use adapter to attach DVL or DuraBlack to the support box. Trim Collars sold separately.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use in interior or exterior installations to add lateral support to the chimney. Assures a 2" to 6" clearance to combustible walls. Required every 8 feet.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Connects gas or oil-burning appliance to DuraTech Chimney. Tee cap included. Maintain 18" clearance (air space) to combustible materials. Bottom tee section swivels. No adapter is needed to connect this to the support box.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to prevent excessive weight on the elbows by supporting the weight of the chimney. Required to be installed between two elbows in offset installations. Multiple elbow straps may be required for offset installations. Refer to installation instructions.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. Supports up to 60 feet of DuraTech Chimney. Use adapter to attach DVL or DuraBlack to the support box. Trim Collars sold separately.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use in ceiling/floor penetrations when a ceiling support is not used. Not required when passing through the roof. Fits on underside of ceiling and adjusts to cover framing.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use in interior or exterior installations to add lateral support to the chimney. Assures a 2" to 6" clearance to combustible walls. Required every 8 feet.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Fits over Firestop Radiation Shield or a support box. Consists of two parts - a collar and a base.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to prevent excessive weight on the elbows by supporting the weight of the chimney. Required to be installed between two elbows in offset installations. Multiple elbow straps may be required for offset installations. Refer to installation instructions.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Connects gas or oil-burning appliance to DuraTech Chimney. Tee cap included. Maintain 18" clearance (air space) to combustible materials. Bottom tee section swivels. No adapter is needed to connect this to the support box.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Adjusts from a minimum of 4" to a maximum of 10" wall thickness, and fits between standard wall studs. To accommodate thicker walls, the telescoping pieces can be extended up to 16"with a field-fabricated extension installed. Interior trim ring painted black. Must be installed with DuraTech chimney pipe horizontally through the wall and extend 6" into the room beyond the interior wall. 6" and 8" stainless steel exterior trim available.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use in interior or exterior installations to add lateral support to the chimney. Assures a 2" to 6" clearance to combustible walls. Required every 8 feet.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use in ceiling/floor penetrations when a ceiling support is not used. Not required when passing through the roof. Fits on underside of ceiling and adjusts to cover framing.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Designed to support the DuraTech chimney and allows the chimney to pass through the roof and extend down from the ceiling. Ideal for cathedral ceilings and free-standing fireplace installations.Supports up to a maximum total chimney length of 45 feet above and 20 feet chimney below Roof Support. Adjustable to different roof pitches. Use Finishing Collar and adapter to attach DVL or DuraBLack to the DuraTech chimney. Trim Collar not included.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Adjusts from a minimum of 4" to a maximum of 10" wall thickness, and fits between standard wall studs. To accommodate thicker walls, the telescoping pieces can be extended up to 16"with a field-fabricated extension installed. Interior trim ring painted black. Must be installed with DuraTech chimney pipe horizontally through the wall and extend 6" into the room beyond the interior wall. 6" and 8" stainless steel exterior trim available.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6" over a horizontal distance of 12". 6" - 8" available with large base.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Fits over Firestop Radiation Shield or a support box. Consists of two parts - a collar and a base.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with zero-clearance fireplace manufacturer to ensure DuraTech Chimney is approved for use on fireplace.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to weather proof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For example, a 6/12 pitch has a vertical rise of 6" over a horizontal distance of 12". 6" - 8" available with large base.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Required where pipe terminates above the roofline. Removable screws allow for cleaning of the chimney and spark arrestor screen. Shown with optional Spark Arrestor screen.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Connects gas or oil-burning appliance to DuraTech Chimney. Tee cap included. Maintain 18" clearance (air space) to combustible materials. Bottom tee section swivels. No adapter is needed to connect this to the support box.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Designed to support the DuraTech chimney and allows the chimney to pass through the roof and extend down from the ceiling. Ideal for cathedral ceilings and free-standing fireplace installations.Supports up to a maximum total chimney length of 45 feet above and 20 feet chimney below Roof Support. Adjustable to different roof pitches. Use Finishing Collar and adapter to attach DVL or DuraBLack to the DuraTech chimney. Trim Collar not included.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Install where a chimney passes through a roof. May be required for Canadian zero-clearance fireplaces, refer to appliance manufacturer's installation instructions.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Install where a chimney passes through a roof. May be required for Canadian zero-clearance fireplaces, refer to appliance manufacturer's installation instructions.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Install where a chimney passes through a roof. May be required for Canadian zero-clearance fireplaces, refer to appliance manufacturer's installation instructions.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Install where a chimney passes through a roof. May be required for Canadian zero-clearance fireplaces, refer to appliance manufacturer's installation instructions.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Required where pipe terminates above the roofline. Removable screws allow for cleaning of the chimney and spark arrestor screen. Shown with optional Spark Arrestor screen.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.

Use to attach DuraTech Chimney to zero-clearance or masonry fireplaces. Check with zero-clearance fireplace manufacturer to ensure DuraTech Chimney is approved for use on fireplace.

DuraTech is a double-wall, all-fuel chimney system for used with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters or other appliances fueled by wood, oil, coal or gas, and zero-clearance fireplaces that are factory-built. This system is designed for normal continuous operation at 1000 degrees flue gas temperatures and is subjected to rigorous and stringent HT requirements of the UL standard ensuring its excellence.