B-Vent Fireplaces

Bring the look of a masonry fireplace home with the 43" Pre-cast Masonry See-Thru B-Vent Firebox Kit w/ Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 30” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 30" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 30” Peterson gas log set with electronic valve and remote
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your hearth the clean finish it deserves with the 48" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

12 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 24" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 24” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

The The Mirage B-Vent Gas Fireplace is Pure, Simple, Clean and Neat! The glass-free open from fireplace installs flush with the wall and can be simply be painted in or surrounded with any non-combustible material. Optional custom surrounds include stainless steel, or cast stone. The The Mirage B-Vent Gas Fireplace offers clean lines with a beautiful beach stone fuel effect.

TheThe Mirage B-Vent Gas Fireplace is an in-wall install and is 16" deep. This fireplace is B-Vented and requires 8" type b-venting and a vertical vent run of at least ten feet from the top of the cabinet.

Features:

• 32,000-42,000 BTUs with natural gas
• 31,000-43,500 BTUs with propane
• Electric ignition and remote control included
• 49" high x 38.5" wide combustible limits
• Intermittent pilot

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 24" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 24” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your hearth the clean finish it deserves with the 42" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 30" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

The Prodigy See-Thru B-Vent Fireplace has a sophisticated style that features radiant design, allowing you to design around this fireplace easily! This fireplace offers great heating ability and exciting design applications.

Features:

• Heat output: 42,000 BTUs
• Signature Command electronic ignition
• Flex hose with on/off valve
• OMNI tested and certified

With a see-thru design you can view the fire from two separate rooms! The natural flame burner system offers an authentic viewing - the aluminized pan burner produces realistic, randomly dancing flames that surround the glowing ceramic fiber logs! Not only will it look beautiful it will also heat your room with an 80% heating efficiency.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the flame easily with a remote. Enjoy A/C functionality with automatic battery backup to control from anywhere in the room.

Dimensions:

• 38" W x 42.375" H x 24.125" D (actual)
• 38.5" W x 42.5" H x 23.125" D (framing)
• 36" W x 22.25" H (viewing area)

Enjoy a beautiful fire with this expansive SBV B-Vent Fireplace - 42" Natural Gas. Its natural venting style makes it easy to install anywhere you can vent up and out. This fireplace is the ideal choice for hard to heat rooms.

Features:

• Heat output: 31,500 BTUs
• Signature Command electronic ignition
• Aluminized burner pan with log set
• 18" flex line with on/off valve

Give people a place to gather, making fire the focal point of you room again. With a natural flame burner system the aluminized pan burner produces realistic, randomly dancing flames. The large ember bed and glowing ceramic fiber logs add to the overall viewing experience. Add bi-fold doors to the fireplace to complete the look and match your home decor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the flame easily with a remote. Enjoy A/C functionality with automatic battery backup to control from anywhere in the room.

Dimensions:

• 46" W x 38" H x 21" D (actual)
• 46.5" W x 38.5" H x 21.5" D (framing)
• 42" W x 21.5" H (viewing area)

Transform your fireplace area with a Kingsman VFI25 Vented Gas Fireplace Insert. This insert is a complete unit that will convert your wood burning fireplace to gas, for a new standard of warmth, beauty, safety and convenience!

Features:

• Dual burner with glowing embers
• 25,000 BTus with NG or LP
• Variable speed blower with thermostat
• Minimum size of fireplace for installation: 24" W x 16" D x 17.5" H

This fireplace insert will work great in a living room to replace an existing wood burning fireplace and is approved to be used in a bedroom or bed sitting room. Design this insert to match your home decor by selecting from a variety of design options - louver kits, surrounds and burning displays.

Select from a millivolt or intermittent pilot ignition system. The millivolt valve system does not use electricity, but has a standing pilot which allows operation during a power failure with hi-low heat and flame adjustment. The intermittent pilot ignition is electronic and uses an electrode to ignite the pilot. The IPI system ensures the pilot flame extends over the burner for immediate ignition and it conserves energy when the appliance is not in operation.

This vented insert uses air cooled pipe (B-vent), or gas flue liners to vent. This appliance uses room air for combustion and exhaust through the B-vent pipe or flexible gas liner. Vented appliances are not as restricted in venting length as compared to direct vent appliances and can use existing chimney systems by running gas flex liner into existing chimneys and terminating with a raincap and flashing.

Enjoy a beautiful fire with this expansive SBV B-Vent Fireplace - 36" Natural Gas. Its natural venting style makes it easy to install anywhere you can vent up and out. This fireplace is the ideal choice for hard to heat rooms.

Features:

• Heat output: 29,000 BTUs
• Signature Command electronic ignition
• Aluminized burner pan with log set
• 18" flex line with on/off valve

Give people a place to gather, making fire the focal point of you room again. With a natural flame burner system the aluminized pan burner produces realistic, randomly dancing flames. The large ember bed and glowing ceramic fiber logs add to the overall viewing experience. Add bi-fold doors to the fireplace to complete the look and match your home decor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the flame easily with a remote. Enjoy A/C functionality with automatic battery backup to control from anywhere in the room.

Dimensions:

• 40" W x 38" H x 14" D (actual)
• 40.5" W x 38.5" H x 14.5" D (framing)
• 36" W x 21.5" H (viewing area)

This Kingsman ZV4200 Zero-Clearance B-Vent Gas Fireplace will allow you to enjoy an evening of warmth next to a beautiful fire. This B-vent fireplace is listed for USA/Canada as a decorative fireplace and it will transform your living area.

Features:

• Dual burner for realistic flame patterns
• SIT valve with hi/lo
• Downdraft limit switch
• 21,000 BTUs NG/20,000 BTUs LP

Choose from a variety of decorative options to create your own distinctive appearance and be assured of complete safety, comfort and long lasting value. Select from a millivolt or intermittent pilot ignition system. The millivolt valve system does not use electricity, but has a standing pilot which allows operation during a power failure with hi-low heat and flame adjustment. The intermittent pilot ignition is electronic and uses an electrode to ignite the pilot. The IPI system ensures the pilot flame extends over the burner for immediate ignition and it conserves energy when the appliance is not in operation. This fireplace has a flame sensor that constantly monitors the pilot flame and provides 100% gas shut off if the pilot is not sensed.

The design of B-vent uses air cooled pipe (B-vent), or gas flex liners to vent appliances. This type of appliance uses room air for combustion and exhausts through the B-vent pipe or flexible gas liner. Vented appliances are not as restricted in venting length as compared to direct vent appliances and can utilize existing chimney systems by running gas flex liner into existing chimneys and terminating with a rain cap and flashing.

This Kingsman ZV3600 Zero-Clearance B-Vent Gas Fireplace will allow you to enjoy an evening of warmth next to a beautiful fire. This B-vent fireplace is listed for USA/Canada as a decorative fireplace and it will transform your living area.

Features:

• Dual burner for realistic flame patterns
• SIT valve with hi/lo
• Downdraft limit switch
• 21,000 BTUs NG/20,000 BTUs LP

Choose from a variety of decorative options to create your own distinctive appearance and be assured of complete safety, comfort and long lasting value. Select from a millivolt or intermittent pilot ignition system. The millivolt valve system does not use electricity, but has a standing pilot which allows operation during a power failure with hi-low heat and flame adjustment. The intermittent pilot ignition is electronic and uses an electrode to ignite the pilot. The IPI system ensures the pilot flame extends over the burner for immediate ignition and it conserves energy when the appliance is not in operation. This fireplace has a flame sensor that constantly monitors the pilot flame and provides 100% gas shut off if the pilot is not sensed.

The design of B-vent uses air cooled pipe (B-vent), or gas flex liners to vent appliances. This type of appliance uses room air for combustion and exhausts through the B-vent pipe or flexible gas liner. Vented appliances are not as restricted in venting length as compared to direct vent appliances and can utilize existing chimney systems by running gas flex liner into existing chimneys and terminating with a rain cap and flashing.

Add a touch of elegance to your home with the BBV B-Vent Fireplace - 36" Natural Gas. Its natural venting style makes it easy to install anywhere you can vent up and out. The fireplace's slim design features the largest viewable area in the industry.

Features:

• Heat output: 22,000 BTUs
• Signature Command electronic ignition
• Aluminized burner pan with log set
• 18" flex line with on/off valve

Give people a place to gather, making fire the focal point of you room again. With a natural flame burner system the aluminized pan burner produces realistic, randomly dancing flames. The large ember bed and glowing ceramic fiber logs add to the overall viewing experience. This fireplace offers a 36" radiant design with a true 36" brick to brick opening so you can truly enjoy the flames! Add bi-fold doors to the fireplace to complete the look and match your home decor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the flame easily with a remote. Enjoy A/C functionality with automatic battery backup to control from anywhere in the room.

Dimensions:

• 40" W x 38" H x 14" D (actual)
• 40.5" W x 38.5" H x 14.5" D (framing)
• 36" W x 21.5" H (viewing area)

The Vantage Hearth Value Line B-Vent Fireplace - 32" introduces the best of both worlds for an efficient and inexpensive fireplace unit. This B-vent fireplace offers the beauty of a wood burning fireplace while demonstrating the convenience of a gas fireplace system. Being able to install almost anywhere in your home, this convenient fireplace simply needs and inexpensive B-vent chimney system installation. The gorgeous fireplace is perfect for smaller homes, providing 15,000 BTU's and warming your bedroom or living room in a few minutes. The unit includes a split refractory log set that gives your B-vent system a natural and stunning look.

Features:

• B-Vent fireplace unit
• Provides up to 15,000 BTU's
• Perfect for smaller homes or cottages
• Includes split refractory log set

Incorporating natural charm with modern heat efficiency, this fireplace can save you time, energy and money. It's pre-wired electrical "J-box" makes the installation easier than ever, while it's millivolt ignition controls make the heating process as simple as possible. Designed with hidden screen pockets adds one more feature to this fireplace, while it's glowing ember beds give the room a radiant vibe.