Wind Resistant Chimney Caps

This is the premier chimney cap for solving common, wind-related draft problems. These problems often occur for homes that have hills, mountains, tall trees or buildings in the vicinity.
How it works: When wind flows around the Vacu-Stack's unique design, wind speeds increase which creates a partial vacuum. This vacuum then pulls flue gases up and out of the chimney, thus preventing wind-induced downdraft and the resulting infiltration of smoke, odor, and flue gas into your home.
This cap also functions as a conventional chimney cap by protecting the chimney from rain, snow, debris, and animals. It is designed for round chimneys that are not air insulated (also called air-cooled). The Vacu-Stack can also be installed on a square or rectangular chimney using the Masonry Adaptor.

This model work with the following types of chimneys:

Single wall

Masonry

Solid pack insulated

Class A

B vent

Note: Optional stainless steel Spark Arrester is required in some states. 1" x 1" is standard; smaller 1/2" x 1/2" mesh is also available.

Please be aware that any Vacu-Stack chimney cap that is larger than 12" will be custom made and will ship out in 1-2 weeks.

Customers from all parts of the country have had great success with the Vacu-Stack. We have found that the Vacu-Stack will solve the majority of down draft issues when they are wind-related. Customers who purchase and install the Vacu-Stack for non-wind-related issues may see an improvement, but not a complete resolution to their down draft problems. Please be aware that if you purchase and install the Vacu-Stack, it cannot be returned.

This is the premier chimney cap for solving common, wind-related draft problems. These problems often occur for homes that have hills, mountains, tall trees or buildings in the vicinity.
How it works: When wind flows around the Vacu-Stack's unique design, wind speeds increase which creates a partial vacuum. This vacuum then pulls flue gases up and out of the chimney, thus preventing wind-induced downdraft and the resulting infiltration of smoke, odor, and flue gas into your home.
This cap also functions as a conventional chimney cap by protecting the chimney from rain, snow, debris, and animals. It is made of Austenitic Stainless Steel and is designed for round chimneys that are air insulated (also called air- cooled).

This Model works with the following types of chimneys:

Double Wall Air Insulated

Triple Wall Air Insulated

Note: Optional stainless steel Spark Arrester is required in some states. 1" x 1" is standard; smaller 1/2" x 1/2" mesh is also available.

Custom Sizes are available: Please call our Technical Sales Department to order a custom size chimney cap - 1-800-919-1904
b>Please be aware that any Vacu-Stack chimney cap that is larger than 10" will be custom made and will ship out in 1-2 weeks.

Customers from all parts of the country have had great success with the Vacu-Stack. We have found that the Vacu-Stack will solve the majority of down draft issues when they are wind-related. Customers who purchase and install the Vacu-Stack for non-wind-related issues may see an improvement, but not a complete resolution to their down draft problems. Please be aware that if you purchase and install the Vacu-Stack, it cannot be returned.

The Vacu-Stack Copper Cap uses copper for exceptional beauty and austenitic stainless steel for strength. Owners of homes in historic areas, or those with a higher sense of aesthetic values, may prefer the look of copper over traditional stainless steel. The Copper Vacu-Stack models are an excellent choice in these situations, and offer all of the benefits of the original stainless steel models. Each cap is built with sturdy austenitic stainless steel construction surrounded by a lustrous copper hood.

This is the premier chimney cap for solving common, wind-related draft problems. These problems often occur for homes that have hills, mountains, tall trees or buildings in the vicinity.
How it works: When wind flows around the Vacu-Stack's unique design, wind speeds increase which creates a partial vacuum. This vacuum then pulls flue gases up and out of the chimney, thus preventing wind-induced downdraft and the resulting infiltration of smoke, odor, and flue gas into your home.
This cap also functions as a conventional chimney cap by protecting the chimney from rain, snow, debris, and animals. It is designed for round chimneys that are not air insulated (also called air-cooled). The Vacu-Stack can also be installed on a square or rectangular chimney using the Masonry Adaptor.

This model work with the following types of chimneys:

Single wall

Masonry

Solid pack insulated

Class A

B vent

Note: Optional stainless steel Spark Arrester is required in some states. 1" x 1" is standard; smaller 1/2" x 1/2" mesh is also available. >

Please be aware that any Vacu-Stack chimney cap that is larger than 10" will be custom made and will ship out in 1-2 weeks.

Customers from all parts of the country have had great success with the Vacu-Stack. We have found that the Vacu-Stack will solve the majority of down draft issues when they are wind-related. Customers who purchase and install the Vacu-Stack for non-wind-related issues may see an improvement, but not a complete resolution to their down draft problems. Please be aware that if you purchase and install the Vacu-Stack, it cannot be returned.

The Vacu-Stack Copper Cap uses copper for exceptional beauty and austenitic stainless steel for strength. Owners of homes in historic areas, or those with a higher sense of aesthetic values, may prefer the look of copper over traditional stainless steel. The Copper Vacu-Stack models are an excellent choice in these situations, and offer all of the benefits of the original stainless steel models. Each cap is built with sturdy austenitic stainless steel construction surrounded by a lustrous copper hood.

This is the premier chimney cap for solving common, wind-related draft problems. These problems often occur for homes that have hills, mountains, tall trees or buildings in the vicinity.
How it works: When wind flows around the Vacu-Stack's unique design, wind speeds increase which creates a partial vacuum. This vacuum then pulls flue gases up and out of the chimney, thus preventing wind-induced downdraft and the resulting infiltration of smoke, odor, and flue gas into your home.
This cap also functions as a conventional chimney cap by protecting the chimney from rain, snow, debris, and animals. It is made of copper and Austenitic Stainless Steel and is designed forround chimneys that are air insulated (also called air-cooled).

This Model works with the following types of chimneys:

Double Wall Air Insulated

Triple Wall Air Insulated

Note: Optional stainless steel Spark Arresters required in some states. 1" x 1" is standard; smaller 1/2" x 1/2" mesh is also available.< b>Please be aware that any Vacu-Stack chimney cap that is larger than 10" will be custom made and will ship out in 1-2 weeks.

Customers from all parts of the country have had great success with the Vacu-Stack. We have found that the Vacu-Stack will solve the majority of down draft issues when they are wind-related. Customers who purchase and install the Vacu-Stack for non-wind-related issues may see an improvement, but not a complete resolution to their down draft problems. Please be aware that if you purchase and install the Vacu-Stack, it cannot be returned.

This adaptor is used to install the Vacu-Stack Chimney Cap to masonry chimneys. The Vacu-Stack Adaptor and Vacu-Stack Chimney Cap need to be the same size.

6" Adaptor fits 8" x 8" Flue Tile
7" Adaptor fits 8" x 8" Flue Tile
8" Adaptor fits 13" x 13" Flue Tile
10" Adaptor fits 13" x 13" Flue Tile

Please be aware that any Vacu-Stack chimney cap that is larger than 10" will be custom made and will ship out in 1-2 weeks.

Stainless Steel Bird Guards are mesh screens that are available for all VacuStack sizes to limit intrusion of animals, leaves and debris into chimneys. These screens or birdguards, function as limited spark arresters and are required in some states for that purpose. The Bird Guard for the 8" Vacu-Stack also fits the 8"x12" oval Vacu-Stack.