31" & Larger Fireplace Inserts

An ISD Vent Free Insert will slide right into your existing masonry fireplace. Its Triple Play Burner System gives off a full, yellow flame that is exquisitely complemented by it's tavern brown firebrick.

Features:

• Heat output: 28,000 BTUs
• Thermal efficiency of 99%
• Standard blower included
• Millivolt ignition system

This easy to install vent free insert will fit most standard masonry fireplaces with a minimum opening of 24" high and 33" wide. Available with standard black trim and removable unitized louvers as well as an optional face plates, this insert offers an impressive BTU range from 19,000 to 28,000 keeping up to 950 square feet warm and cozy.

This vent free insert does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 33" W x 23.875" H x 15.25" D (actual)
• 33" W x 24" H x16" D (minimum opening dimensions)

Convert your wood burning fireplace to gas, for a new standard of warmth, beauty, safety and convenience with the Kingsman IDV33 Direct Vent Fireplace Insert! With 75% efficiency it is sure to warm your home and family during colder winter months.

Features:

• Dual burner with glowing embers
• 23,250 BTUs output with NG/21,375 BTUs output with LP
• Varibale speed blower with thermostat
• Minimum size of fireplace for installation: 26.25" W x 14.375" D x 21.375" H

This fireplace insert will work great in a living room to replace an existing wood burning fireplace and is approved to be used in a mobile home, bedroom or bed sitting room. This insert can easily be designed to match your home decor - choose from louver kits or clean view kits and an optional surround and doors to create your own distinctive appearance.

Louver Surround Sizes:

• Surround Top (one piece) covers 34.5" W x 26.625" H
• Surround (3 piece) covers 40" W x 28" H
• Surround (3 piece) covers 44" W x 30" H
• Universal Surround (one piece) covers 45" W x 35" H

Clean View Surround Sizes:

• Picture Frame Surround covers 39.375" W x 29.125" H
• Clean View Surround covers 39.375" W x 26" H

Select from a millivolt or intermittent pilot ignition system. The millivolt valve system does not use electricity, but has a standing pilot which allows operation during a power failure with hi-low heat and flame adjustment. The intermittent pilot ignition is electronic and uses an electrode to ignite the pilot. The IPI system ensures the pilot flame extends over the burner for immediate ignition and it conserves energy when the appliance is not in operation.

Direct vent fireplace inserts use a dual vent system, generally two 3" flex gas lines, one pipe is for exhaust, while the other pipe brings in outside air for combustion. The design of this insert allows for a completely sealed system that does not compromise inside air quality of your home.

The Napoleon GDIZC-N Direct Vent Gas Fireplace Insert is the perfect enhancement to any home or cottage that is able to house this insert. Constructed with a heavy duty burner gives this unit phenomenal durability and a handsome style. Conveniently requiring no electricity gives this insert the efficiency that you have been searching for. Providing up to 24,000 BTU's, this fireplace insert is marking with a 85% efficiency rating, ready to help lower the heating cost in any home.

Features:

• Heavy duty stainless steel burner
• Provides up to 24,000 BTUs for the user
• Featured with 50% flame/heat adjustment for your comfort
• Includes light weight Phazer® log set

Controlled with an outside combustion air damper helps to control airflow daily. The unit's heat-resistant ceramic glass door allows you and your family to safely enjoy the radiant display of dancing flames. The included light weight Phazer® log set gives your insert a natural look that attracts the eye immediately. It's natural charm and light-weight touch add to the unit's convenience and attraction.

The Osburn 2400 Wood Stove Insert is an impressive EPA approved wood insert with a heating capacity of up to 2,700 square feet, 12.5" of clearance in the firebox, and a burn time of up to 10 hours!

Features

• 130 CFM blower included
• 3.2 cubic foot firebox
• Max log length: 21"

In addition to its impressive performance, the Osburn 2400 Wood Stove Insert is environmentally efficient, with emissions as low as 1.6 g/hour. If you're looking for a large wood stove for your home or cottage this is the perfect choice.

The Osburn Matrix Wood Stove Insert is an aesthetically pleasing cast iron wood burning insert. This EPA approved insert packs a lot of heat with style! With an output up to 75,000 BTUs/hour.

Features:

• Firebox Volume: 2.3 cubic feet
• Heating Output: 75,000 BTUs
• 130 CFM blower with variable speed

Each model is equipped with an ultra-quiet crossflow blower. The secondary air pipes are integrated into the 1/8'' stainless steel baffle to give rigidity that withstands even the severest conditions and to ensure combustion of the highest quality.

The Topaz Direct Vent Insert - Large will transform your old masonry fireplace into an attractive and efficient focal point! This direct vent insert features a sleek style, realistic flames and powerful heat output, you'll be able to enjoy the warmth and comforst of an efficient fireplace that helps save on fuel costs.

Features:

• Heat output: 30,000 BTUs
• Millivolt ignition system
• 3" intake and exhaust
• Flex line with on/off shut-off valve

This insert will create a beautiful flame display with the aluminized pan burner. This burner pan produces realistic, randomly dancing flames! Its large ember bed and glowing ceramic logs add to the overall viewing experience. The heat-activated blower features a varibale speed control to help distribute the fireplace's warm efficiently.

Dimensions:

• 31.1875" W x 23.375" H x 18.375" D (actual)
• 31" W x 23.5" H x 16.5" D x 23" Rear Width (minimum opening dimensions)
• 28.25" W x 18.125" (viewing area)

The Vantage Hearth Fireplace Insert with Golden Oak Logs is a beautiful way to spruce up your living room or bedroom without creating a large mess and construction work. This heavy duty fireplace insert is the perfect match for any masonry fireplace that has the need for a quick and easy, yet quality makeover. Having a 99.9% efficiency rating, this easy-to-assemble fireplace simply slides into an existing masonry or hangs on a wall. Designed with a textured charcoal paint finish, this fireplace compliments any style or decor that you have chosen for your home or cottage.

Features:

• Choose between natural gas and propane
• Textured charcoal paint finish
• Constructed with heat-circulating louvers
• Designed with concealed remote ready controls
• Ceramic logs included

This zero-clearance fireplace can be used with natural gas or liquid propane, giving every user their own custom choice. The heavy duty gas burning unit includes 24" fiber ceramic logs that are carefully designed to resemble real wood with it's split and charred areas. Being remote-ready enables this fireplace to easily be controlled with a hand-held or wall-mounted remote control with easy installation. Beautifully designed with it's charcoal finish and smooth louvers, this fireplace reaches up to 33,000 BTU's during a use. This fireplace insert is not approved for manufactured fireplaces.