Gas Outdoor Fireplaces

Bring the look of a masonry fireplace home with the 63" Pre-cast Masonry Firebox Kit with 16" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the two included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with 14" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with 12" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with 14" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with 12" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with 14" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 43" Pre-cast Masonry See-Through Firebox Kit with 16" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide fire safety and additional downdraft, due to the fact that see-through fireplaces generally have difficulty with air supply. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with 12" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

While designing your own fireplace might seem like a daunting task at first, its something that we do every day. Starting with the Elite Outdoor Custom Linear Fireplace, let us help you take a step outside the ordinary and be part of a design that is uniquely you – call one of our outdoor design experts at 800.919.1904 to start building your fireplace.

Features:

• Available in bio-ethanol or natural gas fuel type
• Firebox walls are constructed from stainless steel
• Choice of fireglass adds depth and magnification
• Limited Lifetime Manufacturer Warranty
• Granitech finish

From laying plans to laying the stone, we can provide you with the answers and the expertise that you won’t find anywhere else. The way we see it, if fire doesn’t have any boundaries, why should your imagination?

While designing your own fireplace might seem like a daunting task at first, it's something that we do every day. Starting with the Elite Outdoor Custom Classique Fireplace, let us help you take a step outside the ordinary and be part of a design that is uniquely you – call one of our outdoor design experts at 800.919.1904 to start building your fireplace.

Features:

• Beginning with a firebox, choose your own chase, mantel, and hearth
• Fireplace comes ready to finish to your specifications
• Suitable for most ventless, direct vent, or wood burning fireboxes
• Built from outdoor rated noncombustible materials
• Limited Lifetime Manufacturer Warranty

From laying plans to laying the stone, we can provide you with the answers and the expertise that you won’t find anywhere else. The way we see it, if fire doesn’t have any boundaries, why should your imagination?

While designing your own fireplace might seem like a daunting task at first, it's something that we do every day. Starting with the Elite Outdoor Custom Corner Fireplace, let us help you take a step outside the ordinary and be part of a design that is uniquely you – call one of our outdoor design experts at 800.919.1904 to start building your fireplace.

Features:

• Beginning with a firebox, choose your own chase, mantel, and hearth
• Fireplace comes ready to finish to your specifications
• Suitable for most ventless, direct vent, or wood burning fireboxes
• Built from outdoor rated noncombustible materials
• Limited Lifetime Manufacturer Warranty

From laying plans to laying the stone, we can provide you with the answers and the expertise that you won’t find anywhere else. The way we see it, if fire doesn’t have any boundaries, why should your imagination?

While designing your own fireplace might seem like a daunting task at first, it's something that we do every day. Starting with the Elite Outdoor Custom Grande Classique Fireplace, let us help you take a step outside the ordinary and be part of a design that is uniquely you – call one of our outdoor design experts at 800.919.1904 to start building your fireplace.

Features:

• Beginning with a firebox, choose your own chase, mantel, and hearth
• Fireplace comes ready to finish to your specifications
• Suitable for most ventless, direct vent, or wood burning fireboxes
• Built from outdoor rated noncombustible materials
• Limited Lifetime Manufacturer Warranty

From laying plans to laying the stone, we can provide you with the answers and the expertise that you won’t find anywhere else. The way we see it, if fire doesn’t have any boundaries, why should your imagination?

While designing your own fireplace might seem like a daunting task at first, it's something that we do every day. Starting with the Elite Outdoor Custom Fireplace with Extended Hearth, let us help you take a step outside the ordinary and be part of a design that is uniquely you – call one of our outdoor design experts at 800.919.1904 to start building your fireplace.

Features:

• Beginning with a firebox, choose your own chase, mantel, and hearth
• Fireplace comes ready to finish to your specifications
• Suitable for most ventless, direct vent, or wood burning fireboxes
• Built from outdoor rated noncombustible materials
• Limited Lifetime Manufacturer Warranty

From laying plans to laying the stone, we can provide you with the answers and the expertise that you won’t find anywhere else. The way we see it, if fire doesn’t have any boundaries, why should your imagination?

While designing your own fireplace might seem like a daunting task at first, it's something that we do every day. Starting with the Elite Outdoor Custom Tall Classique Fireplace, let us help you take a step outside the ordinary and be part of a design that is uniquely you – call one of our outdoor design experts at 800.919.1904 to start building your fireplace.

Features:

• Beginning with a firebox, choose your own chase, mantel, and hearth
• Fireplace comes ready to finish to your specifications
• Suitable for most ventless, direct vent, or wood burning fireboxes
• Built from outdoor rated noncombustible materials
• Limited Lifetime Manufacturer Warranty

From laying plans to laying the stone, we can provide you with the answers and the expertise that you won’t find anywhere else. The way we see it, if fire doesn’t have any boundaries, why should your imagination?

While designing your own fireplace might seem like a daunting task at first, it's something that we do every day. Starting with the Elite Outdoor Custom Fireplace with Extended Hearth Surround, let us help you take a step outside the ordinary and be part of a design that is uniquely you – call one of our outdoor design experts at 800.919.1904 to start building your fireplace.

Features:

• Beginning with a firebox, choose your own chase, mantel, and hearth
• Fireplace comes ready to finish to your specifications
• Suitable for most ventless, direct vent, or wood burning fireboxes
• Built from outdoor rated noncombustible materials
• Limited Lifetime Manufacturer Warranty

From laying plans to laying the stone, we can provide you with the answers and the expertise that you won’t find anywhere else. The way we see it, if fire doesn’t have any boundaries, why should your imagination?

Say goodbye to the hassle of wood with the Blue Rooster Gatsby Chiminea w/ Gas Kit - Charcoal. This aluminum chiminea includes fireplace granules, manual control to adjust the flame height from low (20,000 BTUs/LP) to high (32,000 BTUs/LP), 10' hose with tank adapter, high grade fire ring insert, and seven piece ceramic log set. Simply choose between the propane or natural gas options.

Features:

• Ranges from 20,000 - 32,000 BTUs
• Smooth charcoal powder coat finish
• Choose between natural gas or propane
• 44" overall height
• Aluminum construction

Channel thoughts of days gone by with this vintage style Blue Rooster Gatsby Chiminea w/ Gas Kit - Charcoal. Snuggle up in style with loved ones while relaxing in the comfort of your own backyard. The safety door provides easy access for adding wood and roasting marshmallows. This chiminea is a great gift for anyone who enjoys the outdoors and the perfect chiminea to a deck or patio.

The Blue Rooster Sun Stack Chiminea with Gas Kit - Antique Green is an easy way to keep entertaining on your patio year round. Forged from heavy cast aluminum, this is one chiminea that will be around for many seasons to come – and it’s got the warranty to prove it.

Features:

• Comes propane ready, with simple wood or gas conversion
• Non-rusting cast aluminum body won’t easily fracture
• Removable neck for convenient grilling
• Spark arrestor to prevent flying debris
• Stainless steel mouth spark screen for easy fire tending

Built propane ready, the Blue Rooster Sun Stack Chiminea with Gas Kit - Antique Green is ready to burn right out of the box. Although it is not recommended to cook food on a propane or gas fire, conversion to a wood burning unit only takes a moment. The hinged safety door provides easy access for tending and stoking the fire – and with the convenient carrying handles, this unit is not only easy to maintain, but also simple to move.