Gas Outdoor Fireplaces

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with 14" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with 14" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bringing a taste of the elegant to your backyard, the Charlevoix Grand Outdoor Fireplace is a genuine piece of masonry-styled innovation. At over six feet in height and nearly three feet in width, this outdoor fireplace is a capstone of the outdoor room.

Features:

• Includes wood grate and spark arrestor
• Knock out plug makes unit convertible for gas burning
• Click-in design requires no fasteners, mortar, or glue
• Patented composite concrete and fiberglass mixture is lighter and stronger than concrete

Composed of a patented composite concrete and fiberglass blend, the Charlevoix Grand Outdoor Fireplace is lighter and stronger than average concrete and finished with a sandy overtone for an aged concrete appearance. This fireplace unit is built with an interlocking design, without need for mortar, fasteners, or glue.

Bringing a taste of the elegant to your backyard, the Chesterfield Grand Outdoor Fireplace is a genuine piece of masonry-styled innovation. At over six feet in height and nearly three feet in width, this outdoor fireplace is a capstone of the outdoor room.

Features:

• Includes wood grate and spark arrestor
• Knock out plug makes unit convertible for gas burning
• Click-in design requires no fasteners, mortar, or glue
• Patented composite concrete and fiberglass mixture is lighter and stronger than concrete

Composed of a patented composite concrete and fiberglass blend, the Chesterfield Grand Outdoor Fireplace is lighter and stronger than average concrete and finished with a sandy overtone for an aged concrete appearance. This fireplace unit is built with an interlocking design, without need for mortar, fasteners, or glue.

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

The Contractor's Model - Unfinished is all about self-expression – the glass-fiber reinforced concrete body is the canvas, and the next step is up to you. Straight lines, subtle contours, and the unrefined strength of the Kingston design have come together to embody the essence of true, raw warmth.

Features:

• High-temperature refractory cement firebox
• Unfinished surface allows of customization
• One year limited warranty
• Glass-fiber reinforced concrete body provides strength and durability

The outdoor fireplace is at the heart of the great outdoors – a breath of warm air, an essence of the subtle changes of the seasons, all of it encompassed in the continually molding flames. Experience the Contractor's Model - Unfinished, finding liberty in the very sense of the word – from color to contrast, come discover a creative outlet that can be renewed from one fire to the next.

Rugged and wild, the Bull Outdoor Rivera Firewall Outdoor Gas Fireplace - Golden Harvest Rock/Valencia Tile is a step towards earthen inspiration. This fireplace goes beyond providing heat – it gives insight, tranquility, and a sense of coming to rest, demonstrated by the golden, ever-molding flames.

Features:

• Yields 70,000 BTU’s
• Golden Harvest Rock with Valencia Tile
• Subtle access door discreetly hides propane tank

Calculated design and assembly takes the Bull Outdoor Rivera Firewall Outdoor Gas Fireplace - Golden Harvest Rock/Valencia Tile a step further than an average fireplace. Featuring the soft touch of burning flames, this unit is a creation of tile and rock.

Please Note: A fork lift is needed at the time of delivery.

Rugged and wild, the Bull Outdoor Rivera Firewall - Outdoor Gas Fireplace is a step towards earthen inspiration. This fireplace goes beyond providing heat – it gives insight, tranquility, and a sense of coming to rest, demonstrated by the golden, ever-molding flames.

Features:

• Yields 70,000 BTU’s
• Available in 18 different tile options
• Offers the choice between 12 diverse rock bases
• Subtle access door discreetly hides propane tank

Calculated design and assembly takes the Bull Outdoor Rivera Firewall - Outdoor Gas Fireplace a step further than an average fireplace. Featuring the soft touch of burning flames, this unit is a creation of stucco, tile, granite, and rock.

Please Note: A fork lift is needed at the time of delivery.

Bring the look of a masonry fireplace home with the 43" Pre-cast Masonry See-Through Firebox Kit with 16" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide fire safety and additional downdraft, due to the fact that see-through fireplaces generally have difficulty with air supply. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bringing a glimpse of modern ingenuity to your backyard, the Chica Outdoor Fireplace is a genuine work of masonry-styled talent. This fireplace employs tested indoor styles with outdoor originality, adding an element of home to your outdoor living area.

Features:

• Glass-fiber reinforced concrete body won’t degrade
• Complimentary customizable gas plumbing included
• Choose between many different finishes
• Easy assembly with use of only bolts
• One year limited warranty

Built from a glass-fiber reinforced concrete frame and a high-temperature refractory cement firebox, this unit is specifically designed for longevity and consistent durability. Ready-made for discreet gas conversion, the Chica Outdoor Fireplace is a herald of the outdoor fireplace movement, easily customized to put the gas key and gas line right where you want them.

The Contractor's Model with Moulding - Unfinished is all about self-expression – the glass-fiber reinforced concrete body is the canvas, and the next step is up to you. Straight lines, subtle contours, and the unrefined strength of the Kingston design have come together to embody the essence of true, raw warmth.

Features:

• High-temperature refractory cement firebox
• Unfinished surface allows of customization
• One year limited warranty
• Glass-fiber reinforced concrete body provides strength and durability

The outdoor fireplace is at the heart of the great outdoors – a breath of warm air, an essence of the subtle changes of the seasons, all of it encompassed in the continually molding flames. Experience the Contractor's Model with Moulding - Unfinished, finding liberty in the very sense of the word – from color to contrast, come discover a creative outlet that can be renewed from one fire to the next.

The Arch Stone Firewall with Propane Storage is a captivating firewall with a unique design and brilliant fire feature. With a tall arch opening and herringbone design, this firewall offers a touch of traditional with the contemporary!

Features:

• Dimensions: 65" W x 28" D x 73" H
• Heat Output: 35,000 BTUs
• Heavy Texture color finishes
• Natural Gas or Propane

The Arch Stone Firewall with Propane Storage is at the heart of the great outdoors – a breath of warm air and an essence of the subtle changes of the seasons - all encompassed by the continually molding flames. Experience the Arch Stone Firewall with Propane Storage outside convention, finding liberty in the very sense of the word – from color to contour, come discover a creative outlet that can be renewed from one fire to the next.

Constructed of pre-cast concrete, this unit is built to withstand the elements. This Arch Stone Firewall with Propane Storage can run on natural gas or propane - if using propane, the tank will fit in the base.

More than a waterfall and more than a fireplace, the Bull Outdoor Acqua Firewall - Outdoor Gas Fireplace & Waterfall is a step towards peace. Your fireplace goes beyond providing heat – it gives inspiration, tranquility, and a sense of coming to rest, demonstrated by the reconciliation of two opposing elements.

Features:

• Yields 70,000 BTU’s
• Available in 18 different tile options
• Offers the choice between 12 diverse rock bases
• Subtle access door discreetly hides propane tank
• Uses an 11V pump to circulate water

Continual water flow takes the Bull Outdoor Acqua Firewall - Outdoor Gas Fireplace & Waterfall a step further than an average fireplace. Featuring the soft touch of flowing water, this unit is a creation of stucco, tile, granite, and rock.

Please Note: A fork lift is needed at the time of delivery. Water must be refilled over time

Shown in Grey Rock / Fidelio Tile

The Napoleon GSS42 Outdoor Gas Fireplace is a perfect match for your stylish backyard entertainment area. With no venting required and a zero clearance installation, the possibilities are endless for this outdoor gas fireplace. With its brushed stainless steel double doors, this fireplace possesses a sleek and finished style that fits well with any decor. The realistic gas log set adds natural beauty to this powerful fireplace, while supplying up to 65,000 BTU's for the user.

Features:

• Brushed stainless steel double doors
• Provides up to 65,000 BTU's
• Millivolt remote control with adjustable flame
• Choose from natural gas or liquid propane

With a 100% SafeGuard gas control system, the unit automatically shuts off the gas supply for your safety. The strong, heat resistant glass displays the radiant flames, for a cozy environment. The stainless steel firebox was carefully designed to withstand tough environments or weather conditions. With the natural gas or liquid propane gas option, the Napoleon GSS42 Outdoor Gas Fireplace is able to accommodate everyone's preference.

Bringing a touch of rustic charm to your backyard, the San Juan Fireplace is an authentic piece of masonry-styled ingenuity. Bringing the outdoor room to a new standard of domestic appeal, this fireplace employs tested indoor styles with outdoor originality.

Features:

• Yields 60,000 BTU’s
• Available in natural gas or liquid propane
• Galvanized steel frame holds up against the wear of the elements
• Vent free design requires no chimney
• Includes wind resistant pilot light

Built for use with multiple gas types, the San Juan Fireplace is a herald of the outdoor fireplace movement, combining indoor accents with outdoor durability. Built from a galvanized steel frame system with Hardibacker board, this fireplace boasts an exterior stucco finish, along with a glass fiber reinforced concrete mantel and top cap. The burner comes with a wind resistant pilot light, and the fire is able to burn for over 8 hours with a 20lb. tank. Versatile as it is functional, this unit can be used on any flat surface, such as a deck, concrete, and brick pavers.

Please Note: Unit does not include gas logs.

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

The Escea Outdoor Gas Stainless Steel Fireplace - Ferro Front will add effortless class and style to your outdoor room. It's constructed of 100% marine grade stainless steel and has an innovative flue-less design, making installation simple and less costly. Because of its wide opening and durable, sleek design, this outdoor gas fireplace will easily become the centerpiece of any outdoor room. It comes with a 4" glass dam that runs along the bottom of the unit, making it perfect to retain decorative medium like fireglass, marbles and even sea shells.

Features:

• Control system works from batteries, so no main power is required
• Ignited by touch pad electronic control with option of three different heat settings
• Comes standard with stainless steel weather shield to guard gas burners from wind, rain and other debris
• Can be washed easily with just a hose!

The Escea Outdoor Gas Stainless Steel Fireplace - Ferro Front is designed to be built into an outdoor external wall. If you don't have a suitable outer wall, the Kitset Enclosure accessory will allow you to place the fireplace anywhere you wish. This model is available in either a natural gas or propane option.

Create a completely unique look in your outdoor room with the Escea Outdoor Gas Stainless Steel Stone Fireplace-Verta Face. This top and bottom portions of this fascia are customizable to match your decor, with the stone to be sourced by the customer. With a DIY opportunity like this, you'll be able to create a working masterpiece in your own home by choosing the type of stone you use on the face of the your outdoor fireplace.

Features:

• Control system works from batteries, so no main power is required
• Ignited by touch pad electronic control with option of three different heat settings
• Comes standard with stainless steel weather shield to guard gas burners from wind, rain and other debris
• Can be washed easily with just a hose!

The Escea Outdoor Gas Stainless Steel Stone Fireplace-Verta Face is constructed of 100% marine grade stainless steel and has an innovative flue-less design, making installation simple and less costly. Because of its wide opening and durable, sleek design, this outdoor gas fireplace will easily become the centerpiece of any outdoor room. It comes with a 4" glass dam that runs along the bottom of the unit, making it perfect to retain decorative medium like fireglass, marbles and even sea shells.

The Escea Outdoor Gas Stainless Steel Stone Fireplace-Verta Face is designed to be built into an outdoor external wall. If you don't have a suitable outer wall, the Kitset Enclosure accessory will allow you to place the fireplace anywhere you wish. This model is available in either a natural gas or propane option.

Add a sense of elegance to your outdoor room with the Escea Outdoor Gas Florentine Bronze Fireplace - Ferro Front. It's constructed of 100% marine grade stainless steel and has an innovative flue-less design, making installation simple and less costly. Because of its wide opening and eye-catching bronze hue, this outdoor gas fireplace will easily become the centerpiece of any outdoor room. It comes with a 4" glass dam that runs along the bottom of the unit, making it perfect to retain decorative medium like fireglass, marbles and even sea shells.

Features:

• Control system works from batteries, so no main power is required
• Ignited by touch pad electronic control with option of three different heat settings
• Comes standard with stainless steel weather shield to guard gas burners from wind, rain and other debris
• Can be washed easily with just a hose!

The Escea Outdoor Gas Florentine Bronze Fireplace - Ferro Front is designed to be built into an outdoor external wall. If you don't have a suitable outer wall, the Kitset Enclosure accessory will allow you to place the fireplace anywhere you wish. This model is available in either a natural gas or propane option.

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 63" Pre-cast Masonry Firebox Kit with 16" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the two included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Add a sense of classic luxury to your outdoor room with the Escea Outdoor Gas Crème Travertine Fireplace - Verta Front. It's constructed of 100% marine grade stainless steel and has an innovative flue-less design, making installation simple and less costly. Because of its wide opening and stylish travertine limestone inlay, this outdoor gas fireplace will easily become the centerpiece of any outdoor room. It comes with a 4" glass dam that runs along the bottom of the unit, making it perfect to retain decorative medium like fireglass, marbles and even sea shells.

Features:

• Control system works from batteries, so no main power is required
• Ignited by touch pad electronic control with option of three different heat settings
• Comes standard with stainless steel weather shield to guard gas burners from wind, rain and other debris
• Can be washed easily with just a hose!

The Escea Outdoor Gas Crème Travertine Fireplace - Verta Front is designed to be built into an outdoor external wall. If you don't have a suitable outer wall, the Kitset Enclosure accessory will allow you to place the fireplace anywhere you wish. This model is available in either a natural gas or propane option.

The Escea Outdoor Gas Black Granite Fireplace - Verta Front will add effortless sophistication and style to your outdoor room. It's constructed of 100% marine grade stainless steel and has an innovative flue-less design, making installation simple and less costly. Because of its wide opening and elegant black granite inlay, this outdoor gas fireplace will easily become the centerpiece of any outdoor room. It comes with a 4" glass dam that runs along the bottom of the unit, making it perfect to retain decorative medium like fireglass, marbles and even sea shells.

Features:

• Control system works from batteries, so no main power is required
• Ignited by touch pad electronic control with option of three different heat settings
• Comes standard with stainless steel weather shield to guard gas burners from wind, rain and other debris
• Can be washed easily with just a hose!

The Escea Outdoor Gas Black Granite Fireplace - Verta Front is designed to be built into an outdoor external wall. If you don't have a suitable outer wall, the Kitset Enclosure accessory will allow you to place the fireplace anywhere you wish. This model is available in either a natural gas or propane option.

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904