Gas Outdoor Fireplaces

Designed to be slender and chic, the Napoleon GSST8 Outdoor Gas Fireplace Torch is a sliver of innovative heating and light. The heavy duty stainless steel construction creates a stable framework around the torch, with heat resistant tempered glass, ensuring a safe and comfortable environment.

Features:

• Available in natural gas or liquid propane
• Electronic ignition promoting fuel efficiency
• On/off switch for easy control
• Built-in circuit breaker
• Heavy duty stainless steel frame

With no ventilation required, the Napoleon GSST8 Outdoor Gas Fireplace Torch can be used indoors or out, without complication. Though naturally designed to burn gas, this fireplace is also available in liquid propane, featuring a convenient on/off switch and a preinstalled electronic ignition.

Sculpted from clean lines and smooth surfaces, the Al Fresco Outdoor Gas Fireplace - 36" showcases a stainless steel construction and an expansive viewing area. By use of a radiant refractory lining, this unit produces consistently high temperatures night after night.

Features:

• Heat output: 60,000 BTU’s
• All stainless steel construction
• CSA design certified
• Concrete refractory lining reflects superior heat
• Includes basket grate, mesh firescreen, flex line, burner, and logs

Engineered specifically for warming up the outdoors, the Al Fresco Outdoor Gas Fireplace - 36" is fully insulated to keep cold air from seeping in. The unit comes complete with a refractory brick lining, which not only efficiently reflects heat, but also works as an easy to clean surface. The log set sits upon a stainless steel basket grate, with the Insta-Flame gas burner system pumping flames up from beneath, giving off a natural, well-rounded look.

Dimensions:

• 40" W x 43.25" H x 22" D (actual)
• 41" W x 43.75" H x 22.5" D (framing)
• 36" W x 22.75" H (viewing area)

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with 12" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

The Mirage Stone 3-Sided Gas Burning Outdoor Fireplace with Logs is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace is built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Works with charcoal, wood, natural gas, and liquid propane
• Mesh screen on four sides
• Utilizes a powder coated steel door system with five screen handle designs to choose from

When it comes to customizability and day to day use, the Mirage Stone 3-Sided Gas Burning Outdoor Fireplace with Logs can’t be matched. This unit can be customized to work with gas logs, by use of natural gas or liquid propane. Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: Due to the exposure of all four sides to the elements, hot ashes can be blown out of the unit unless gas logs are installed. The installation of a natural gas line requires a licensed mechanical contractor in most states. The gas log set is available for natural gas or liquid propane.

Give your outdoor room the clean finish it deserves with the 42" Outdoor Engineered Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

The Mirage Stone Outdoor Gas Burning Fireplace with Logs is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace is built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Works with natural gas or liquid propane
• Easy assembly, without needing mortar or fasteners
• Utilizes a powder coated steel door system with five screen handle designs to choose from

The reviews speak for themselves – when it comes to customizability and day to day use, the Mirage Stone Outdoor Gas Burning Fireplace with Logs can’t be matched. This unit can even be customized to work with gas logs, by use of natural gas or liquid propane. Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: The installation of a natural gas line requires a licensed mechanical contractor in most states. The gas log set is available for natural gas or liquid propane.

The Mirage Stone See-Through Gas Burning Outdoor Fireplace with Logs is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace is built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Works with charcoal, wood, natural gas, and liquid propane
• Mesh screen on four sides
• Utilizes a powder coated steel door system with five screen handle designs to choose from

When it comes to customizability and day to day use, the Mirage Stone See-Through Gas Burning Outdoor Fireplace with Logs can’t be matched. This unit can be customized to work with gas logs, by use of natural gas or liquid propane. Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: Due to the exposure of all four sides to the elements, hot ashes can be blown out of the unit unless gas logs are installed. The installation of a natural gas line requires a licensed mechanical contractor in most states. The gas log set is available for natural gas or liquid propane.

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your outdoor room the clean finish it deserves with the 36" Outdoor Engineered Arched Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

Bringing a taste of the elegant to your backyard, the Rochester Outdoor Fireplace is a genuine piece of masonry-styled innovation. At over six feet in height and nearly three feet in width, this outdoor fireplace is a capstone of the outdoor room.

Features:

• Includes wood grate and spark arrestor
• Knock out plug makes unit convertible for gas burning
• Click-in design requires no fasteners, mortar, or glue
• Patented composite concrete and fiberglass mixture is lighter and stronger than concrete

Composed of a patented composite concrete and fiberglass blend, the Rochester Outdoor Fireplace is lighter and stronger than average concrete and finished with a sandy overtone for an aged concrete appearance. This fireplace unit is built with an interlocking design, without need for mortar, fasteners, or glue.

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with 12" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your outdoor room the clean finish it deserves with the 36" Outdoor Engineered Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

Add the Kingsman Zero-Clearance Outdoor Fireplace - Satin Black to your outdoor living area to create an ambiance like none-other. This outdoor fireplace is designed specifically to withstand the elements and is ideally suited for a contemporary or classic look.

Features:

• Listed for USA/Canada outdoor use only
• Hi/Lo adjustment wall switch
• 55,000 BTU heat output
• Includes stainless steel screen and log set

The Black Satin firebox is a great alternative when covering the front face with brick or other non-combustible materials. The finish is pre-treated with a zinc coating for corrosion resistance and paint adhesion. Add the warmth of fire to your outdoor living space - it will soon become your favorite room!

The Mirage Stone 3-Sided Gas Burning Outdoor Fireplace is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace is built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Drilled, ready for gas installation
• Mesh screen on four sides
• Utilizes a powder coated steel door system with five screen handle designs to choose from

When it comes to customizability and day to day use, the Mirage Stone 3-Sided Gas Burning Outdoor Fireplace can’t be matched. This unit can be customized to work with gas logs or a fireglass hearth kit. Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: Due to the exposure of all four sides to the elements, hot ashes can be blown out of the unit unless gas logs are installed. The installation of a natural gas line requires a licensed mechanical contractor in most states.

Give your outdoor room the clean finish it deserves with the 30" Outdoor Engineered Arched Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

5 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

The Mirage Stone Outdoor Gas Burning Fireplace is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace is built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Drilled, ready for gas
• Easy assembly, without needing mortar or fasteners
• Utilizes a powder coated steel door system with five screen handle designs to choose from

The reviews speak for themselves – when it comes to customizability and day to day use, the Mirage Stone Outdoor Gas Burning Fireplace can’t be matched. This unit can even be customized to work with a hearth kit for logs or fireglass. Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: The installation of a natural gas line requires a licensed mechanical contractor in most states.

The Mirage Stone See-Through Gas Burning Outdoor Fireplace is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace is built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Drilled, ready for a gas line
• Mesh screen on four sides
• Utilizes a powder coated steel door system with five screen handle designs to choose from

When it comes to customizability and day to day use, the Mirage Stone See-Through Gas Burning Outdoor Fireplace can’t be matched. This unit can be customized to work with a hearth kit to use logs or firegalss (sold separately). Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: Due to the exposure of all four sides to the elements, hot ashes can be blown out of the unit unless logs are installed. The installation of a natural gas line requires a licensed mechanical contractor in most states.

Give your outdoor room the clean finish it deserves with the 30" Outdoor Engineered Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

5 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

Say goodbye to the hassle of wood with the Blue Rooster Venetian Chiminea w/ Gas Kit - Antique Green. This aluminum chiminea includes fireplace granules, manual control to adjust the flame height from low (20,000 BTUs/LP) to high (32,000 BTUs/LP), 10' hose with tank adapter, high grade fire ring insert, and seven piece ceramic log set. Simply choose between the propane or natural gas options.

Features:

• Ranges from 20,000 - 32,000 BTUs
• Smooth charcoal powder coat finish
• Choose between natural gas or propane
• 54" overall height
• Aluminum construction

Now you can enjoy the evening fire and cook your dinner simultaneously! Gather friends and family around to roast marshmallows, or try your hand at open fire grilling with the Blue Rooster Venetian Chiminea w/ Gas Kit - Antique Green. The large mouth opening allows for an almost 180 degree view of the fire. This chiminea is made of solid hand poured cast aluminum that will give you years of enjoyment with very little maintenance.

Say goodbye to the hassle of wood with the Blue Rooster Venetian Chiminea w/ Gas Kit - Charcoal. This aluminum chiminea includes fireplace granules, manual control to adjust the flame height from low (20,000 BTUs/LP) to high (32,000 BTUs/LP), 10' hose with tank adapter, high grade fire ring insert, and seven piece ceramic log set. Simply choose between the propane or natural gas options.

Features:

• Ranges from 20,000 - 32,000 BTUs
• Smooth charcoal powder coat finish
• Choose between natural gas or propane
• 54" overall height
• Aluminum construction

Now you can enjoy the evening fire and cook your dinner simultaneously! Gather friends and family around to roast marshmallows, or try your hand at open fire grilling with the Blue Rooster Venetian Chiminea w/ Gas Kit - Charcoal. The large mouth opening allows for an almost 180 degree view of the fire. This chiminea is made of solid hand poured cast aluminum that will give you years of enjoyment with very little maintenance.

The Blue Rooster Dragonfly Chiminea with Gas Kit - Antique Green is an easy way to keep entertaining on your patio year round. Forged from heavy cast aluminum, this is one chiminea that will be around for many seasons to come – and it’s got the warranty to prove it.

Features:

• Comes propane ready, with simple wood or gas conversion
• Non-rusting cast aluminum body won’t easily fracture
• Removable neck for convenient grilling
• Spark arrestor to prevent flying debris
• Stainless steel mouth spark screen for easy fire tending

Built propane ready, the Blue Rooster Dragonfly Chiminea with Gas Kit - Antique Green is ready to burn right out of the box. Although it is not recommended to cook food on a propane or gas fire, conversion to a wood burning unit only takes a moment. The hinged safety door provides easy access for tending and stoking the fire – and with the convenient carrying handles, this unit is not only easy to maintain, but also simple to move.

Say goodbye to the hassle of wood with the Blue Rooster Butterfly Chiminea w/ Gas Kit - Charcoal. This aluminum chiminea includes fireplace granules, manual control to adjust the flame height from low (20,000 BTUs/LP) to high (32,000 BTUs/LP), 10' hose with tank adapter, high grade fire ring insert, and seven piece ceramic log set. Simply choose between the propane or natural gas options.

Features:

• Ranges from 20,000 - 32,000 BTUs
• Smooth charcoal powder coat finish
• Choose between natural gas or propane
• 44" overall height
• Aluminum construction

Enjoy the natural splendor of butterflies in your backyard all year with this eye-catching Blue Rooster Butterfly Chiminea w/ Gas Kit - Charcoal. Featuring butterflies gracefully fluttering through the tall grass reeds, this ornately designed chiminea is sure to be a fascinating conversation piece among guests. The fine detail carries on throughout, continuing even into the decorative grilling grate and fire grills.