Outdoor Gas Flame Control Systems

Rising above the odds and the elements, the Automated Fire on Water Surface System is the first ever electronic ignition system designed to be fully immersed in water. Combined with a submersible manifold, this unit burns clean, without allowing water to flow back into the gas line and clog the system.

Features:

• Hot surface ignition
• Intermittent pilot
• 400,000 BTUs
• 24 volt AC operative voltage

It’s time to redefine the boundaries of outdoor fire features. The Automated Fire on Water Surface System is equipped with a thermopile heat sensor, a half inch inlet, and a gas pressure limit of 2.0 psi. Due to the complicated technical nature of the Automated Fire on Water Surface System, we recommend speaking to a Woodland Direct NFI Certified Specialist before ordering your submersible fire manifold.

The All-Weather Electronic Ignition System - High Capacity is a reconciliation of water and fire, blending seamlessly with one alongside the other. This unit is designed for use in fire bowls, fire pits, and larger fire features, outputting a whopping 512,000 BTUs right off the surface of the water.

Features:

• Hot surface ignition
• Intermittent pilot ignition sequence
• 3/4" FPT inlet/outlet size
• 4.5" W x 4.5" L x 5" H valve enclosure

Designed with waterproof gas valves and tested for wind interference up to 50MPH, the All-Weather Electronic Ignition System - High Capacity won’t go out easily, nor clog with water or debris. The pilot burner is removable so that the igniter/thermal can be serviced.

The All-Weather Electronic Ignition System - Standard Capacity is a reconciliation of water and fire, blending seamlessly with one alongside the other. This electronic ignition system is designed for use in fire bowls and fire pits, outputting a whopping 290,000 BTUs just above the surface of the water.

Features:

• Hot surface ignition
• Intermittent pilot ignition sequence
• 1/2" FPT inlet/outlet size
• 4.375" W x 4.375" L x 4.375" H valve enclosure

Designed with waterproof gas valves and tested for wind interference up to 50MPH, the All-Weather Electronic Ignition System - Standard Capacity won’t go out easily, nor clog with water or debris. The pilot burner is removable so that the igniter/thermal can be serviced.

The Vulcan Fire Module is the clever way to conceal the source of your fire. The smallest Electronic Ignition System on the market today, this unit is perfect for small fire bowls, rock crevices, or other cylinder shaped fire features.

Features:

• Hot surface ignition
• Intermittent Pilot
• 25,000 BTUs
• 24 Volt AC Operative Voltage
• 2.5” W x 6.5” H

It’s never been easier to set up a decorative burner in an out-of-the-way position. Designed to emit a flame much like a Tiki Torch, the Vulcan Fire Module is small and sleek, with a half inch inlet and a gas pressure limit of 2.0 psi.

This Manual Spark Flame Sense System Control Box - Large is a heavy duty control system that works with convenience and durability. The system maintains a safe amount of gas flow with the standing pilot and thermocouple sensing.

Features:

• Stainless steel 140k BTU control box
• Up to 30" ring or 72" linear burner
• Control box arrives assembled
• Flex, hard pipe, and fittings included

Featuring a manual flame height adjustment, this unit can be easily varied and controlled. The manual switch spark igniter and safety pilot valve are mounted on the stainless steel box for convenience. Providing easy ignition and and safety for outdoor fires, this Manual Spark Flame Sense System Control Box - Large is easy to use and install.

This Manual Spark Flame Sense System Control Box is a heavy duty control system that works with convenience and durability. The system maintains a safe amount of gas flow with the standing pilot and thermocouple sensing.

Features:

• Stainless steel 90,000 BTU control box
• 36" Pilot assembly with spark igniter
• Control box arrives assembled
• Flex, hard pipe, and fittings included

Featuring manual flame height adjustment, this unit can be easily varied and controlled. The manual switch spark igniter and safety pilot valve are mounted on the stainless steel box for convenience. Providing easy ignition and safety for outdoor fires, this Manual Spark Flame Sense System Control Box is easy to use and install.

This Match Lit Flame Sense System Control Box is a heavy duty control system that works with convenience and durability. The system has flame recognition and manual flame height control.

Features:

• Stainless steel control box
• 48" Pilot and flex line included
• Control box arrives assembled

Featuring manual flame height adjustment, this unit can be easily varied and controlled. The Match Lit Flame Sense System Control Box was designed for 24" (or smaller) fire rings or for 36" (or smaller) linear burners. Providing easy ignition and and safety for outdoor fires, this control box is easy to use and install.

This Fire Pit Connection Kit Liquid Propane Arctic Flame is a basic Fire Pit burner connection kit consisting of gas regulator, connector hoses with fittings, valve, and orifice.

Features:

• 3/8" compression fitting
• Rubber, brass, and steel materials used
• Compatible with propane units only

The Fire Pit Connection Kit Liquid Propane Arctic Flame fits the Fire Pit Burner 24" S/S Arctic Flame. The burner fitting is a 7/16" orifice with locknut and is 40,000 BTU rated. The valve includes a chrome flange and safety key.

This Fire Pit Safety Pilot Valve Set - Natural Gas is a CSA Listed safety pilot kit to be used with natural gas.

Features:

• For use with natural gas units
• Brass, steel, and bronze compositions
• CSA Listed

Use the Fire Pit Safety Pilot Valve Set - Natural Gas with a burner to control the on/off of the burner, sizes 18" - 21".

This Fire Pit Connection Kit Natural Gas Arctic Flame is a basic fire pit burner connection kit consisting of connector hoses with fittings, valve, and orifice.

Features:

• Use exclusively with natural gas units
• Rubber, brass, and steel materials used
• Comes with fittings, valve, and orifice

The Fire Pit Connection Kit Natural Gas Arctic Flame fits the Fire Pit Burner 24" S/S Arctic Flame. The burner fitting is a 7/16" orifice with lockout and is 40,000 BTU rated.

This Fire Pit Burner Connection Kit Liquid Propane Arctic Flame is a standard pan burner connection kit with orifice, aluminum connector tube and air mixer.

Features:

• Use exclusively with propane units
• Rubber, brass, and steel materials used
• Comes with orifice, air mixer, and aluminum connector tubes

Use this Fire Pit Burner Connection Kit Liquid Propane Arctic Flame with a fire pit burner that runs on propane.

This Fire Pit Burner Connection Kit Natural Gas Arctic Flame is a standard pan burner connection kit with orifice and aluminum connector tube.

Features:

• Use exclusively with natural gas units
• Rubber, brass, and steel materials used
• Comes with orifice and aluminum connector tubes

Use this Fire Pit Burner Connection Kit Natural Gas Arctic Flame with a fire pit burner that runs on natural gas.

Install the Crystal Burner DIY Control Panel when using any of the Outdoor GreatRoom fire pit tables or when creating your own fire pit with the Round, Linear or Square Crystal Fire Burners.

Features:

• Dimensions: 6.5" W x 3" D x 6.5" H
• Steel Construction
• Black Powder coat
• Includes: on/off switch, valve, hardware

This control panel is a great convenience for an existing fire pit or a new project and allows for precision operation.

The FPK Push Button Ignition Kit is a simple, yet hugely beneficial accessory to your burning unit. This kit provides spark ignition for your unit, making the ignition process easier than ever! Spend more time enjoying your guests, while your burner ignites at the push of a button.

Features:

• Push button ignition kit
• For units 150,000 BTUs or less
• Includes switch, igniter, bracket, & leads
• Runs with AAA battery

This easy to use switch arrives with the included igniter, bracket, and 36" leads needed to function correctly. Running with a standard AAA battery, this kit is designed to work with units providing 150,000 BTUs or less.