Wood Burning Outdoor Fireplaces

The Rockwood Grand Fireplace has been cut and chiseled to perfection, carefully assembled one brick at a time to achieve a kind of masonry touch that can’t be faked. At six feet high and three feet wide, the Rockwood Grand is the capstone of the outdoor room.

Features:

• Built around a Lennox 36” stainless steel fireplace box
• 2.5” firebrick protects the fire box
• Chimney pipe and spark arrestor included
• Steel reinforcements ensure stability
• Super-Stik adhesive won’t degrade under humidity or temperature change

Available in Bluestone, Sante Fe, and Desert, the Rockwood Grand Fireplace includes two and a quarter inch thick firebrick, ensuring the durability of the wood burning, gas-ready fire box. With the strength of solid, Super-Stik adhesive assembled stone, this fireplace remains unaltered by the elements, standing just as timeless as the very stone its carved from.

Please Note: Before planning your Rockwood Grand Fireplace project, check with your local zoning commission for building restrictions and required construction permits. Also, please be advised that a fork lift is needed at the time of delivery.

The Rockwood Victorian Fireplace has been cut and chiseled to perfection, carefully assembled one brick at a time to achieve a kind of masonry touch that can’t be faked. At over six feet high and four feet wide, the Rockwood Victorian is the capstone of the outdoor room.

Features:

• Dimensions: 52" W x 32" D x 89" H
• 2.25” firebrick protects the fire box
• Steel reinforcements ensure stability
• Super-Stik adhesive won’t degrade under humidity or temperature change

Available in Bluestone, Sante Fe, and Desert, the Victorian Fireplace includes two and a quarter inch firebrick ensuring the durability of the wood burning, gas-ready fire box. With the strength of solid, Super-Stik adhesive assembled stone, this fireplace remains unaltered by the elements, standing just as timeless as the very stone its carved from.

Please Note: Before planning your Victorian Fireplace project, check with your local zoning commission for building restrictions and required construction permits. Also, please be advised that a fork lift is needed at the time of delivery.

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 63" Pre-cast Masonry Firebox Kit with 16" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the two included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

There's nothing quite like the warmth and glow from a crackling fire in your own backyard. The Rockwood Colonial Outdoor Fireplace is perfect for outdoor living enthusiasts who love entertaining. There's no better way to spend time with your friends and family than relaxing and cooking in your own unique outdoor living area.

Features:

• Lakeland pre-cut blocks
• Silver Creek limestone mantel
• Wood burning unit
• Dimensions: 40" W x 32" D x 70" H

This Rockwood Colonial Outdoor Fireplace comes ready to build with concrete pre-cut and sized to fit bricks and a limestone mantel. It is easy to assemble and is estimated to be built in a few hours with two people. This fireplace kit comes packaged with everything you need to complete the build: blocks, adhesive, construction gloves and the instructions.

Each Rockwood product is constructed from cut and preformed bricks. Once mortared together with the included Super-Stik mortar, the bricks create a solid piece that can withstand almost any weather condition. The design of this fireplace will enhance the architectural style of any home!

Please Note: A fork lift is needed at the time of delivery.

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with Liner and 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, with the Split Herringbone brick panels adding the final touch to the inside of your firebox. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 43" Pre-cast Masonry See-Through Firebox Kit with 16" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide fire safety and additional downdraft, due to the fact that see-through fireplaces generally have difficulty with air supply. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bringing a taste of the elegant to your backyard, the Charlevoix Grand Outdoor Fireplace is a genuine piece of masonry-styled innovation. At over six feet in height and nearly three feet in width, this outdoor fireplace is a capstone of the outdoor room.

Features:

• Includes wood grate and spark arrestor
• Knock out plug makes unit convertible for gas burning
• Click-in design requires no fasteners, mortar, or glue
• Patented composite concrete and fiberglass mixture is lighter and stronger than concrete

Composed of a patented composite concrete and fiberglass blend, the Charlevoix Grand Outdoor Fireplace is lighter and stronger than average concrete and finished with a sandy overtone for an aged concrete appearance. This fireplace unit is built with an interlocking design, without need for mortar, fasteners, or glue.

Bringing a taste of the elegant to your backyard, the Chesterfield Grand Outdoor Fireplace is a genuine piece of masonry-styled innovation. At over six feet in height and nearly three feet in width, this outdoor fireplace is a capstone of the outdoor room.

Features:

• Includes wood grate and spark arrestor
• Knock out plug makes unit convertible for gas burning
• Click-in design requires no fasteners, mortar, or glue
• Patented composite concrete and fiberglass mixture is lighter and stronger than concrete

Composed of a patented composite concrete and fiberglass blend, the Chesterfield Grand Outdoor Fireplace is lighter and stronger than average concrete and finished with a sandy overtone for an aged concrete appearance. This fireplace unit is built with an interlocking design, without need for mortar, fasteners, or glue.

The Rockwood Baby Grand Fireplace has been cut and chiseled to perfection, carefully assembled one brick at a time to achieve a kind of masonry touch that can’t be faked. At six feet high and three feet wide, this unit is the capstone of the outdoor room.

Features:

• 2.5” firebrick protects the fire box
• Pre-cut concrete fits together seamlessly
• Steel reinforcements ensure stability
• One year limited warranty
• Super-Stik adhesive won’t degrade under humidity or temperature change

Available in Bluestone, Sante Fe, and Desert, the Rockwood Baby Grand Fireplace includes two and a quarter inch firebrick, ensuring the durability of the wood burning fire box. With the use of Super-Stik adhesive, this fireplace will stand just as timeless as the very stone its carved from.

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with 14" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Firebox Kit with 14" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bringing a taste of the elegant to your backyard, the Williamston Outdoor Fireplace is a genuine piece of masonry-styled innovation. At over six feet in height and nearly three feet in width, this outdoor fireplace is a capstone of the outdoor room.

Features:

• Includes wood grate and spark arrestor
• Knock out plug makes unit convertible for gas burning
• Click-in design requires no fasteners, mortar, or glue
• Patented composite concrete and fiberglass mixture is lighter and stronger than concrete

Composed of a patented composite concrete and fiberglass blend, the Williamston Outdoor Fireplace is lighter and stronger than average concrete and finished with a sandy overtone for an aged concrete appearance. This fireplace unit is built with an interlocking design, without need for mortar, fasteners, or glue.

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with 14" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Firebox Kit with 12" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your outdoor room the clean finish it deserves with the 42" Outdoor Engineered Arched Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Firebox Kit with 12" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your outdoor room the clean finish it deserves with the 42" Outdoor Engineered Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

Crafted for rustic charm and an antiquated style, the Biltmore Outdoor Wood Burning Fireplace - 44" showcases a Herringbone refractory firebrick lining and a stainless steel construction. As versatile as it is functional, this fireplace is suitable for both indoor and outdoor installation.

Features:

• Stainless steel construction
• Herringbone refractory firebrick lining
• Gas line knockout for NG or LP conversion
• Can be installed indoors or out
• OMNI certified

Warming up your outdoor room and lighting up the night, this Biltmore Outdoor Wood Burning Fireplace - 44" combines a modern medium with a classic ideal. The unit comes complete with a refractory firebrick lining, which not only efficiently reflects heat, but also works as an easy to clean surface. Firebox is easily adaptable for natural gas or liquid propane fuel types.

Dimensions:

• 53.125" W x 52.75" H x 26.325" (actual)
• 53.325" W x 53.125" H x 27.875" D (framing)
• 42" W x 20" H x 28" D (hearth)
• 44" W x 27" H (viewing area)

Please Note: Indoor installation is only appropriate with proper ventilation.

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with 24" Chimney. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. The included twenty-four inch masonry chimney can also assist in ventilation, or add the finishing touch to an outdoor fireplace. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your outdoor room the clean finish it deserves with the 36" Outdoor Engineered Arched Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

Fashioned with a German inspired heritage, the Malibu Outdoor Fireplace Grill is designed for a venerable style and a variety of uses. The multi-purpose fireplace cooks on a heavy-duty four-layer adjustable chrome grill, using wood or charcoal to achieve for your meals a delicious texture and the right kind of taste.

Features:

• A strong quartz finish ensures longevity
• Steel reinforced concrete design won't degrade
• Double wall construction provides constant airflow
• Easy assembly in a short period of time
• Stainless steel hood with matching jacketing

Built to last, this Malibu Outdoor Fireplace Grill utilizes a unique concrete formula with a rugged quartz finish that will last a lifetime. The unique double wall construction provides constant airflow, keeping the outer surfaces cool while confining higher temperatures inside the specially engineered refractory panels that line the firebox. Featuring a solid stainless steel hood with matching stainless steel jacketing along the mantelpiece, the Malibu is finished with a sparkling quartz.

Bringing a taste of the elegant to your backyard, the Rochester Outdoor Fireplace is a genuine piece of masonry-styled innovation. At over six feet in height and nearly three feet in width, this outdoor fireplace is a capstone of the outdoor room.

Features:

• Includes wood grate and spark arrestor
• Knock out plug makes unit convertible for gas burning
• Click-in design requires no fasteners, mortar, or glue
• Patented composite concrete and fiberglass mixture is lighter and stronger than concrete

Composed of a patented composite concrete and fiberglass blend, the Rochester Outdoor Fireplace is lighter and stronger than average concrete and finished with a sandy overtone for an aged concrete appearance. This fireplace unit is built with an interlocking design, without need for mortar, fasteners, or glue.

Bring the look of a masonry fireplace home with the 33" Pre-cast Masonry Firebox Kit with 12" Flue. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, boasting a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Compatible with both indoor or outdoor construction
• Ready to burn wood, natural gas, or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly indoors or out—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Although this firebox can accommodate glass doors, it is not recommended that they remain closed while a fire is burning. Spark arrestors and chimney caps are also great options to provide additional downdraft and fire safety. The unit arrives ready for wood burning, with a fuel line knock-out that can be placed on either side of the firebox. For those who prefer to keep their fireplace wood burning only, the knock-out is easily mortared off with the included concrete plug—for those who are after the convenience of a propane or natural gas fuel line, no on-sight drilling will be required. For all specific measurements, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Sculpted from clean lines and smooth surfaces, the Al Fresco Outdoor Wood Burning Fireplace - 42" showcases a stainless steel construction and an expansive viewing area. By use of a radiant heating style, this unit produces consistently high temperatures night after night.

Features:

• All stainless steel construction
• Gas line knockout for NG or LP conversion
• UL listed premium excellence
• Basket grate, flue damper, and firescreen included
• Concrete refractory lining reflects superior heat

Warming up your outdoor room and lighting up the night, this Al Fresco Outdoor Wood Burning Fireplace - 42" combines a modern medium with a classic ideal. The unit comes complete with a refractory brick lining, which not only efficiently reflects heat, but also works as an easy to clean surface. Its firebox is easily adaptable for natural gas or liquid propane fuel types.

Dimensions:

• 46" W x 43.25" H x 22" D (actual)
• 47" W x 43.75" H x 22.5" D (framing)
• 36.75" W x 15.5" H x 22.875" D (hearth)
• 42" W x 22.75"H (viewing area)

Give your outdoor room the clean finish it deserves with the 36" Outdoor Engineered Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

Sculpted from clean lines and smooth surfaces, the Al Fresco Outdoor Wood Burning Fireplace - 36" showcases a stainless steel construction and an expansive viewing area. By use of a radiant heating style, this unit produces consistently high temperatures night after night.

Features:

• All stainless steel construction
• Gas line knockout for NG or LP conversion
• UL listed premium excellence
• Basket grate, flue damper, and firescreen included
• Concrete refractory lining reflects superior heat

Warming up your outdoor room and lighting up the night, this Al Fresco Outdoor Wood Burning Fireplace - 36" combines a modern medium with a classic ideal. The unit comes complete with a refractory brick lining, which not only efficiently reflects heat, but also works as an easy to clean surface. Its firebox is easily adaptable for natural gas or liquid propane fuel types.

Dimensions:

• 40" W x 43.25" H x 22" D (actual)
• 41" W x 43.75" H x 22.5" D (framing)
• 31.125" W x 15.5" H x 19.875" D (hearth)
• 36" W x 22.75"H (viewing area)

Give your outdoor room the clean finish it deserves with the 30" Outdoor Engineered Arched Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

5 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

The Mirage Stone 3-Sided Wood Burning Outdoor Fireplace is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Comes with a 5 year warranty
• Works with charcoal, wood, natural gas, and liquid propane
• Mesh screen on four sides
• Utilizes a powder coated steel door system with five screen handle designs to choose from

When it comes to customizability and day to day use, the Mirage Stone 3-Sided Wood Burning Outdoor Fireplace can’t be matched. Not only does the wood burning unit come with an adjustable height BBQ grill, but it can even be customized to work with gas logs, by use of natural gas or liquid propane. Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: Due to the exposure of all four sides to the elements, hot ashes can be blown out of the unit unless gas logs are installed. The installation of a natural gas line requires a licensed mechanical contractor in most states. Gas log sets are available for natural gas or liquid propane.

Fashioned with a German inspired heritage, the San Remo Outdoor Fireplace Grill is designed for a venerable style and a variety of uses. The multi-purpose fireplace cooks on a four-layer adjustable chrome grill, using wood or charcoal to achieve a delicious texture and the right kind of taste.

Features:

• Base Dimensions: 38.5" W x 22.5" D
• Overall Dimensions: 44" W x 26" D x 80" H
• Strong quartz finish ensures longevity
• Steel reinforced concrete design won't degrade
• Double wall construction provides constant airflow

Built to last, this San Remo Outdoor Fireplace Grill utilizes a distinctive concrete formula with a rugged quartz finish that will last a lifetime. The unique double wall construction provides constant airflow, keeping the outer surfaces cool while confining higher temperatures inside the specially engineered refractory panels that line the firebox. Faced with a dramatic two tone surface in textured concrete, the unit is finished with a dazzling copper inlay at the front of the mantelpiece, which provides a truly authentic appeal.

Fashioned with a German inspired heritage, the Aspen Outdoor Fireplace Grill is designed for a venerable style and a variety of uses. The multi-purpose fireplace cooks on a heavy-duty four-layer adjustable chrome grill, using wood or charcoal to achieve for your meals a delicious texture and the right kind of taste.

Features:

• A strong quartz finish ensures longevity
• Steel reinforced concrete design won't degrade
• Double wall construction provides constant airflow
• Easy assembly in a short period of time
• One year guaranteed warranty

Built to last, this Aspen Outdoor Fireplace Grill utilizes a distinctiveconcrete formula with a rugged quartz finish that will last a lifetime. The unique double wall construction provides constant airflow, keeping the outer surfaces cool while confining higher temperatures inside the specially engineered refractory panels that line the firebox. Faced with a dramatic two tone surface in textured concrete, the unit is finished with a dazzling copper inlay at the front of the mantelpiece, which provides a truly authentic Aspen appeal.

The Mirage Stone Outdoor Wood Burning Fireplace w/BBQ is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace is built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Works with charcoal, wood, natural gas, and liquid propane
• Easy assembly, without needing mortar or fasteners
• Utilizes a powder coated steel door system with five screen handle designs to choose from

The reviews speak for themselves – when it comes to customizability and day to day use, the Mirage Stone Outdoor Wood Burning Fireplace w/BBQ can’t be matched. Not only does the wood burning unit come with an adjustable height BBQ grill, but it can even be customized to work with gas logs, by use of natural gas or liquid propane. Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: The installation of a natural gas line requires a licensed mechanical contractor in most states. Gas log sets are available for natural gas or liquid propane.

The Mirage Stone See-Through Wood Burning Outdoor Fireplace is a work of modern ingenuity, featuring a simple yet effective interlocking construction. Using new technology in material sciences, this outdoor fireplace is built from a strong, heat dissipating stone that can stand up to extreme temperatures, unlike other concrete and cement based mixes.

Features:

• Available in seven distinct colors
• Works with charcoal, wood, natural gas, and liquid propane
• Mesh screen on four sides
• Utilizes a powder coated steel door system with five screen handle designs to choose from

When it comes to customizability and day to day use, the Mirage Stone can’t be matched. Not only does the wood burning unit come with an adjustable height BBQ grill, but it can even be customized to work with gas logs, by use of natural gas or liquid propane. Owing to an interlocking design and superior craftsmanship, this fire pit won’t fall apart or fracture – and it’s got the warranty to prove it.

Please Note: Due to the exposure of all four sides to the elements, hot ashes can be blown out of the unit unless gas logs are installed. The installation of a natural gas line requires a licensed mechanical contractor in most states. Gas log sets are available for natural gas or liquid propane.

Give your outdoor room the clean finish it deserves with the 30" Outdoor Engineered Masonry Fireplace System. Interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Fireplace has been third party verified for in-home safety

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

5 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 12-15' of chimney can be supported with this fireplace kit.

Fashioned with a German inspired heritage, the Cape Cod Outdoor Fireplace Grill is designed for a venerable style and a variety of uses. The multi-purpose fireplace cooks on a heavy-duty four-layer adjustable chrome grill, using wood or charcoal to achieve for your meals a delicious texture and the right kind of taste.

Features:

• A strong quartz finish ensures longevity
• Steel reinforced concrete design won't degrade
• Double wall construction provides constant airflow
• Easy assembly in a short period of time
• One year guaranteed warranty

Built to last, this fCape Cod Outdoor Fireplace Grill utilizes a distinctive concrete formula with a rugged quartz finish that will last a lifetime. The unique double wall construction provides constant airflow, keeping the outer surfaces cool while confining higher temperatures inside the specially engineered refractory panels that line the firebox. In addition to the unique white quartz surface, the unit is accented by a dazzling copper inlay at the front of the mantelpiece, providing a true Cape Cod appeal.

Our unique and charming Smokee Chiminea with Grill is a sure conversation starter for any outdoor setting. This chiminea has a unique single-hinged mouth opening with grills, making the design both charming and useful. Its also finished with a high-grade polyester powder coat finish to provide a long lasting, beautiful veneer that will maintain its appearance for years to come with minimal maintenance.

Features:

• Antique Pewter Polyester Powder Coat finish
• Constructed from durable cast iron
• 27"L x 19"W x 44"H
• Wood burning unit
• Single-hinged mouth with grills

The Smokee Chiminea with Grill is coated with a protective finish and fire-resistant paint.

Due to the high heat produced in the Smokee Chiminea with Grill, some of its protective finish may wear off. When this happens, the chances of rusting are greatly increased. You may choose to prevent this by curing the chiminea.

To cure the chiminea, light a small fire using only kindling and keep it burning for about an hour. After an hour, light a full fire and burn for an additional hour then let the chiminea cool down.

Another way to inhibit rusting is to spray the chiminea with black High temperature paint and then wipe the paint off before it is dry. This will create a laquer finish to help protect the chiminea in the harsh outside environment.

To inhibit rusting in smaller areas, use sandpaper to smooth out the surface, wipe off any dust, and then spray High temperature paint over the affected area.

Our unique and charming Grape Chiminea with Grill is a sure conversation starter for any outdoor setting. This chiminea is outfitted with a beautiful vineyard motif and comes with included grills, making the design both charming and useful. Its also finished with a high-grade polyester powder coat finish to provide a long lasting, beautiful veneer that will maintain its appearance for years to come with minimal maintenance.

Features:

• Antique Pewter Polyester Powder Coat finish
• Constructed from durable cast iron
• 20"L x 23"W x 54"H
• Wood burning unit
• Vineyard motif

The Grape Chiminea with Grill is coated with a protective finish and fire-resistant paint.

Due to the high heat produced in the Grape Chiminea with Grill, some of its protective finish may wear off. When this happens, the chances of rusting are greatly increased. You may choose to prevent this by curing the chiminea.

To cure the chiminea, light a small fire using only kindling and keep it burning for about an hour. After an hour, light a full fire and burn for an additional hour then let the chiminea cool down.

Another way to inhibit rusting is to spray the chiminea with black High temperature paint and then wipe the paint off before it is dry. This will create a laquer finish to help protect the chiminea in the harsh outside environment.

To inhibit rusting in smaller areas, use sandpaper to smooth out the surface, wipe off any dust, and then spray High temperature paint over the affected area.

Our unique and charming Dragonfly Chiminea with Grill is a sure conversation starter for any outdoor setting. This chiminea is outfitted with a whimsical dragonfly motif and comes with included grills, making the design both charming and useful. Its also finished with a high-grade polyester powder coat finish to provide a long lasting, beautiful veneer that will maintain its appearance for years to come with minimal maintenance.

Features:

• Antique Pewter Polyester Powder Coat finish
• Constructed from durable cast iron
• 20"L x 23"W x 56"H
• Wood burning unit
• Dragonfly motif

The Dragonfly Chiminea with Grill is coated with a protective finish and fire-resistant paint.

Due to the high heat produced in the Dragonfly Chiminea with Grill, some of its protective finish may wear off. When this happens, the chances of rusting are greatly increased. You may choose to prevent this by curing the chiminea.

To cure the chiminea, light a small fire using only kindling and keep it burning for about an hour. After an hour, light a full fire and burn for an additional hour then let the chiminea cool down.

Another way to inhibit rusting is to spray the chiminea with black High temperature paint and then wipe the paint off before it is dry. This will create a laquer finish to help protect the chiminea in the harsh outside environment.

To inhibit rusting in smaller areas, use sandpaper to smooth out the surface, wipe off any dust, and then spray High temperature paint over the affected area.

Our unique and charming Butterfly Chiminea with Grill is a sure conversation starter for any outdoor setting. This chiminea is outfitted with a whimsical butterfly motif and comes with included grills, making the design both charming and useful. Its also finished with a high-grade polyester powder coat finish to provide a long lasting, beautiful veneer that will maintain its appearance for years to come with minimal maintenance.

Features:

• Antique Pewter Polyester Powder Coat finish
• Constructed from durable cast iron
• 20"L x 23"W x 55"H
• Wood burning unit
• Butterfly motif

The Butterfly Chiminea with Grill is coated with a protective finish and fire-resistant paint.

Due to the high heat produced in the Butterfly Chiminea with Grill, some of its protective finish may wear off. When this happens, the chances of rusting are greatly increased. You may choose to prevent this by curing the chiminea.

To cure the chiminea, light a small fire using only kindling and keep it burning for about an hour. After an hour, light a full fire and burn for an additional hour then let the chiminea cool down.

Another way to inhibit rusting is to spray the chiminea with black High temperature paint and then wipe the paint off before it is dry. This will create a laquer finish to help protect the chiminea in the harsh outside environment.

To inhibit rusting in smaller areas, use sandpaper to smooth out the surface, wipe off any dust, and then spray High temperature paint over the affected area.

Our unique and charming 53" Leaf Chiminea with Grill is a sure conversation starter for any outdoor setting. This chiminea is outfitted with a unique flower and leaf motif and comes with included grills, making the design both charming and useful. Its also finished with a high-grade polyester powder coat finish to provide a long lasting, beautiful veneer that will maintain its appearance for years to come with minimal maintenance.

Features:

• Antique Pewter Polyester Powder Coat finish
• Constructed from durable cast iron
• 20"L x 20"W x 53"H
• Wood burning unit
• Flower and leaf motif

The 53" Leaf Chiminea with Grill is coated with a protective finish and fire-resistant paint.

Due to the high heat produced in the 53" Leaf Chiminea with Grill, some of its protective finish may wear off. When this happens, the chances of rusting are greatly increased. You may choose to prevent this by curing the chiminea.

To cure the chiminea, light a small fire using only kindling and keep it burning for about an hour. After an hour, light a full fire and burn for an additional hour then let the chiminea cool down.

Another way to inhibit rusting is to spray the chiminea with black High temperature paint and then wipe the paint off before it is dry. This will create a laquer finish to help protect the chiminea in the harsh outside environment.

To inhibit rusting in smaller areas, use sandpaper to smooth out the surface, wipe off any dust, and then spray High temperature paint over the affected area.

Enjoy the classic look of our Tower Feast Chiminea with Grill in any outdoor setting. The intricate basket weaving on the flue and the included grills make it both decorative and useful. Its also finished with a high-grade polyester powder coat finish to provide a long lasting, beautiful veneer that will maintain its appearance for years to come with minimal maintenance.

Features:

• Antique Pewter Polyester Powder Coat finish
• Constructed from durable cast iron
• 25"L x 25"W x 62"H
• Wood burning unit
• Basket weaving decoration on flue

The Tower Feast Chiminea with Grill is coated with a protective finish and fire-resistant paint.

Due to the high heat produced in the Tower Feast Chiminea with Grill, some of its protective finish may wear off. When this happens, the chances of rusting are greatly increased. You may choose to prevent this by curing the chiminea.

To cure the chiminea, light a small fire using only kindling and keep it burning for about an hour. After an hour, light a full fire and burn for an additional hour then let the chiminea cool down.

Another way to inhibit rusting is to spray the chiminea with black High temperature paint and then wipe the paint off before it is dry. This will create a laquer finish to help protect the chiminea in the harsh outside environment.

To inhibit rusting in smaller areas, use sandpaper to smooth out the surface, wipe off any dust, and then spray High temperature paint over the affected area.

Enjoy the classic look of our Feast Chiminea with Grill. Its simple design, decorative scrolling feet, and included grills make it both decorative and useful. Its also finished with a high-grade polyester powder coat finish to provide a long lasting, beautiful veneer that will maintain its appearance for years to come with minimal maintenance.

Features:

• Antique Pewter Polyester Powder Coat finish
• Constructed from durable cast iron
• 25"L x 25"W x 30"H
• Wood burning unit
• Decorative scrolling feet

The Feast Chiminea with Grill is coated with a protective finish and fire-resistant paint.

Due to the high heat produced in the Feast Chiminea with Grill, some of its protective finish may wear off. When this happens, the chances of rusting are greatly increased. You may choose to prevent this by curing the chiminea.

To cure the chiminea, light a small fire using only kindling and keep it burning for about an hour. After an hour, light a full fire and burn for an additional hour then let the chiminea cool down.

Another way to inhibit rusting is to spray the chiminea with black High temperature paint and then wipe the paint off before it is dry. This will create a laquer finish to help protect the chiminea in the harsh outside environment.

To inhibit rusting in smaller areas, use sandpaper to smooth out the surface, wipe off any dust, and then spray High temperature paint over the affected area.

Our unique and charming 45" Leaf Chiminea with Grill is a sure conversation starter for any outdoor setting. This chiminea is outfitted with a unique flower and leaf motif and comes with included grills, making the design both charming and useful. Its also finished with a high-grade polyester powder coat finish to provide a long lasting, beautiful veneer that will maintain its appearance for years to come with minimal maintenance.

Features:

• Antique Pewter Polyester Powder Coat finish
• Constructed from durable cast iron
• 15"L x 15"W x 45"H
• Wood burning unit
• Flower and leaf motif

The 45" Leaf Chiminea with Grill is coated with a protective finish and fire-resistant paint.

Due to the high heat produced in the 45" Leaf Chiminea with Grill, some of its protective finish may wear off. When this happens, the chances of rusting are greatly increased. You may choose to prevent this by curing the chiminea.

To cure the chiminea, light a small fire using only kindling and keep it burning for about an hour. After an hour, light a full fire and burn for an additional hour then let the chiminea cool down.

Another way to inhibit rusting is to spray the chiminea with black High temperature paint and then wipe the paint off before it is dry. This will create a laquer finish to help protect the chiminea in the harsh outside environment.

To inhibit rusting in smaller areas, use sandpaper to smooth out the surface, wipe off any dust, and then spray High temperature paint over the affected area.