Patio Heater Parts & Accessories

The Bromic Ceiling Mount Pole for Smart-Heat Lines reflects a helpful accessory to all Smart-Heat units from Bromic Heating. This heavy duty accessory is designed to easily mount your new patio heater on a ceiling rather than a wall or ledge.

Features:

• Designed for Bromic Platinum and Tungsten heaters
• Mount your heater on a ceiling
• Choose from 6 sizes

Ranging from 9.69" - 41.18" this ceiling mount can satisfy any arrangement that you had in mind for your outdoor entertainment area. Making your job easier, this ceiling mount is ready to help in the process of making your next event warmer than ever!

Purchase the Electrical Kit for Lynx Post Mount Patio Heater. This kit includes a Switch and Transformer for use with indoor controls.

Features:

• Designed for Indoor use
• Works with Lynx Post Mount Patio Heaters
• High Quality electronics
• Finished Look

Purchase the Base Cover for Lynx Post Mount Patio Heater. This add a finished look and will add protection to your patio heater.

Features:

• Designed for Indoor or Outdoor use
• Works with Lynx Post Mount Patio Heaters
• Protects mounting base electronics
• Finished Look

This weatherproof Solaira Digital Variable Controller - ETL is a digital, variable control that allows you to adjust the output of your Solaira patio heater. The control allows for 10 - 100% adjustment of the available power.

Features:

• Commercial Grade
• ETL Approved
• Outdoor Use
• Wall or post mounted

The control is simple and intuitive with the on/off switch that will turn the appliance on to the last power setting when it was turned off and the “soft start” feature will bring the power up slowly to the emitter adding an estimated 25% to the emitter life. The up/down controls are simple to use and the heater or light level is shown on the LED front panel. The Solaira Variable Controller is engineered for installation in both indoor or outdoor applications including wet environments. The controller can be used to control heaters on outdoor applications including patios, outdoor structures and pergolas as well as all indoor applications.

Power Source:

• Max Load: 1600 Watt, 115-120 VAC, 15.5 AMP Quartz Emitter OR Tube AND HID technology/3200 Watt, 208-240 VAC, 15.5 AMP Quartz Emitter OR Tube AND HID technology
• Controller will operate: 115-120VAC: One (1) quartz lamps totaling up to 1.6kW/One (1) quartz tube totaling up to 1.6kW; 208-240VAC: One (1) or two (2) quartz lamps totaling up to 3.2kW/Up to two (2) quartz tubes totaling up to 3.2 kW VAC

• On/Off switch
• Controllable heat settings from 10 to 100%.
• Wall or post mounted, requires a 4”x 4” electrical wall box would mount
• Accommodates standard 1/2” conduit hardware
• Controller will operate

One (1) quartz lamps totaling up to 1600W at 115 to 120VAC
One (1) quartz tube totaling up to 1600W at 115 to 120VAC
One (1) or two (2) quartz lamps totaling up to 3200W at 208 to 240VAC
One (1) or two (2) quartz tubes totaling up to 3200W VAC

Caution: All quartz lamps have a high en-rush that can be as high as 15 times the steady state current. For this reason, the maximum number of appliances is two (2) of up to1600W at 208/240V and one (1) of up 1600W at 115 to 120VAC. Any higher wattages could damage the control. The Solaira Variable Heat Controller is engineered for installation in both indoor or outdoor applications including wet environments. The controller can be used to control heaters on outdoor applications including patios, outdoor structures and pergolas as well as all indoor applications.

POWER SOURCE
The controller is designed to control the following heating configurations:
115- 120 VAC up to 1600 Watt, Quartz Emitter (lamp) OR Tube technology
208- 240 VAC up to 3200 Watt, Quartz Emitter (lamp) OR Tube technology

No yes [Error processing dynamic tag getCurrentAttribute('item','custitem_standard_brand') : record invtpart 72948 not found] No Solaira Patio Heaters NoBullets-NoLogo 0 Solaira Variable Heater Controller 1 to 2 Business Days

Use the Solaira SMaRT Water Proof Timer Control - 4.0kW to easily control your infrared heater. Designed to provide energy savings in an indoor or outdoor applications. This model switch the heater on for a predetermined time period between 1-60 minutes.

Features:

• Dimensions: 5.125" L x 3" W x 5.125" H
• Timer Settings: 1 - 60 minutes
• Max Watts: 4.0kW
• Certifications: UL94; IP65; cETL; CE

The microcontroller-based unit incorporates zero-voltage switching and a soft-start function to eliminate the heaters initial high inrush current, potentially increasing heater emitter life by as much as 30%. The heaters are switched on for a user-settable time period of between 5 and 60 minutes. Installation of the unit is simple and once our solid state controller is installed it is relatively maintenance-free.

The Solaira SMaRT Water Proof Occupancy/Motion Control - 4.0kW is designed to provide energy saving when used with infrared heaters or other heating and lighting products. This monitoring system will help to save money when no one is in the heating zone. These models have a built in passive Infrared sensor allowing the heaters to automatically switch on only when people are present.

Features:

• Dimensions: 5.125" L x 3" W x 5.125" H
• Temperature Range: 41º - 70º F
• Timer: 5 - 60 minutes
• Certifications: UL94; IP95; cETL; CE

This control also features an on-board temperature sensor that monitors the local temperature and inhibits the heaters when the temperature exceeds a predetermined set point of between 41ºF to 77ºF.

The microcontroller-based unit incorporates zero-voltage switching and a soft-start function to eliminate the heaters initial high inrush current, potentially increasing heater emitter life by as much as 30%. The heaters are switched on for a user-settable time period of between 5 and 60 minutes. This period is reset each time the PIR detects any further movement. Installation of the unit is simple and once installed is relatively maintenance-free.

Use the Solaira SMaRT Water Proof Timer Control - 6.0kW to easily control your infrared heater. Designed to provide energy savings in an indoor or outdoor applications. This model switch the heater on for a predetermined time period between 1-60 minutes.

Features:

• Dimensions: 5.125" L x 3" W x 5.125" H
• Timer Settings: 1 - 60 minutes
• Max Watts: 6.0kW
• Certifications: UL94; IP65; cETL; CE

The microcontroller-based unit incorporates zero-voltage switching and a soft-start function to eliminate the heaters initial high inrush current, potentially increasing heater emitter life by as much as 30%. The heaters are switched on for a user-settable time period of between 5 and 60 minutes. Installation of the unit is simple and once our solid state controller is installed it is relatively maintenance-free.

The Solaira SMaRT Water Proof Occupancy/Motion Control - 6.0kW is designed to provide energy saving when used with infrared heaters or other heating and lighting products. This monitoring system will help to save money when no one is in the heating zone. These models have a built in passive Infrared sensor allowing the heaters to automatically switch on only when people are present.

Features:

• Dimensions: 5.125" L x 3" W x 5.125" H
• Temperature Range: 41º - 70º F
• Timer: 5 - 60 minutes
• Certifications: UL94; IP95; cETL; CE

This control also features an on-board temperature sensor that monitors the local temperature and inhibits the heaters when the temperature exceeds a predetermined set point of between 41ºF to 77ºF.

The microcontroller-based unit incorporates zero-voltage switching and a soft-start function to eliminate the heaters initial high inrush current, potentially increasing heater emitter life by as much as 30%. The heaters are switched on for a user-settable time period of between 5 and 60 minutes. This period is reset each time the PIR detects any further movement. Installation of the unit is simple and once installed is relatively maintenance-free.

The Flush Mount Plaster Frame for 39" Infratech Heater is one of the best mounting options. This patio heater accessory helps in mounting a 33 inches or 39 inches heater and also easily fits in a 39 inches unit. It is made of stainless steel and has a dimension of 47 inches length and 17 inches width. It allows you to install your heater flush mounted to a wall or ceiling for a streamlined look. Your heater looks equally at home in a variety of commercial and residential settings when you use the flush mount plaster frame. It is a great custom installation option that is made in the USA.

Use the Solaira SHP 30 Amp Vented Enclosure to enclose your Solaira High Power Control. This unit is UL Listed to be used with the 30 Amp control and has the proper venting to allow for adequate air flow through the controller.

The Flush Mount Plaster Frame for 61-1/4" Infratech Dual Heater is one of the best mounting options. This patio heater accessory helps in mounting a 61-1/4" inches heater. It is made of stainless steel and has a dimension of 70 inches length and 17 inches width. It allows you to install your heater flush mounted to a wall or ceiling for a streamlined look. Your heater looks equally at home in a variety of commercial and residential settings when you use the flush mount plaster frame. It is a great custom installation option that is made in the USA.

The Solaira SHP High Power Analog Control 120V/240V - 30 Amp incorporates exclusive design features to protect power semiconductor components against damage. This type of control can be used in variable resistance loads for infrared heating systems.

Features:

• Mains Frequency: 50/60 Hz standard
• Overall Efficiency: 98.5% - 99.5%
• Certifications: cULus approved, ANSI, CSA
• UL approved encloses available

The high power controls incorporate exclusive design features to protect power semiconductor components against damage. There are Three Pillars of Protection:

• The unique "Vbo Clamping" provides unmatched protection for power semiconductors against transient voltage spikes common on commercial and industrial power mains
• The 2 millisecond fuses protect semiconductors against shod-circuit faults. The high power control is equipped with factory and approved fuses coordinated with power semiconductors
• The proprietary heatsinks are engineered in-house, coordinating finite-element analysis with on-site lab test

Use the Solaira SHP 80 Amp Vented Enclosure to enclose your Solaira High Power Control. This unit is UL Listed to be used with the 80 Amp control and has the proper venting to allow for adequate air flow through the controller.

Easily mount your Alpha Patio Heater with the Aluminum Post for Alpha Patio Heater - 7' 11". This post stands 7' 11" and is designed for commercial use. The base can be bolted down to wood or concrete.

The Solaira SMaRT Digital Variable Control - 240V/6.0kW is a water-resistant control designed to provide energy savings when used with infrared heaters or other heating and lighting products. This controller has a 1 to 10 step setting allowing you to find the optimum comfort setting in your specific area.

Features:

• Digital variable control
• UL94 Certified enclosure
• Indoor/Outdoor Use
• Surface mounted

The controller has a built-in temperature sensor that monitors the temperature and inhibits the heaters when the temperature exceeds a pre-determined set point of between 41ºF - 77ºF. The controller can also be fitted with an optional remote location temperature sensor if the controller is in a different area then the heater location.

Power Source:

• Max Load: 6.0kw; 208-240V
• Heating Configuration:
4x 1.5 kW, 208/240 OR 3x 2.0 kW, 208/240 OR 2x 3.0 kW, 208/240 OR 1x 6.0 kW, 208/240