Ponds

The SuperFlo 800 Pond Pump is great for ponds sizes 30-100 gallons. This is an all-in-one kit with everything you need to create beautiful water features in your pond. This energy efficient, submersible, magnetic-driven pump can accommodate a stream, small waterfall and create a fountain! This Superflo pump features four fountain heads, a flow diverter, telescopic rise, mechanical filter and tubing outlet. You can now add one or two extra filters to your pond kit to extend the life of your pump!

The motor is a permanent magnet-driven synchronous motor. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The pump also has water resistent ceramic shaft and brushes. The flow-rate can vary with the adjustable knob and this pump runs in silence with it's vibration-damping rubber pads. Because this pump has a fountain spray oxygen is added to the pond which is excellent for aeration and water circulation.

Maintenance: The SuperFlo 800/1300 Pumps are cetrifugal pumps with a magnetic movement, driven by a watertight synchronous motor. They require minimum maintenance, only periodic cleaning of the filtering material and the rotor. Remember, before doing any work on your pump you MUST turn it off! To clean the filtering material, simply remove the filter and rinse the sponge. To clean the rotor, after having removed the filter, release the cover B by turning it counter-clockwise and take out the rotor. Wash everything in lukewarm water, using a soft brush to remove any deposits of scale. Then reassemble the parts.

The SuperFlo 1300 Pond Pump is great for ponds sizes 100-200 gallons. This is an all-in-one kit with everything you need to create beautiful water features in your pond. This energy efficient, submersible, magnetic-driven pump can accommodate a stream, small waterfall and create a fountain! This Superflo pump features four fountain heads, a flow diverter, telescopic rise, mechanical filter and tubing outlet. You can now add one or two extra filters to your pond kit to extend the life of your pump!

The motor is a permanent magnet-driven synchronous motor. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The pump also has water resistent ceramic shaft and brushes. The flow-rate can vary with the adjustable knob and this pump runs in silence with it's vibration-damping rubber pads. Because this pump has a fountain spray oxygen is added to the pond which is excellent for aeration and water circulation.

Maintenance: The SuperFlo 800/1300 Pumps are cetrifugal pumps with a magnetic movement, driven by a watertight synchronous motor. They require minimum maintenance, only periodic cleaning of the filtering material and the rotor. Remember, before doing any work on your pump you MUST turn it off! To clean the filtering material, simply remove the filter and rinse the sponge. To clean the rotor, after having removed the filter, release the cover B by turning it counter-clockwise and take out the rotor. Wash everything in lukewarm water, using a soft brush to remove any deposits of scale. Then reassemble the parts.

The SuperFlo 4000 Pump is great for ponds sizes 700-900 gallons. This is an all-in-one kit with everything you need to create beautiful water features in your pond. This energy efficient, submersible, magnetic-driven pump can accommodate a stream, small waterfall and create a fountain! This Superflo pump features four fountain heads, a flow diverter, telescopic rise, coupling, mechanical filter and tubing outlet. You can now add one or two extra filters to your pond kit to extend the life of your pump!

The motor is a permanent magnet-driven synchronous motor. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The pump also has water resistent ceramic shaft and brushes. The flow-rate can vary with the adjustable knob and this pump runs in silence with it's vibration-damping rubber pads. Because this pump has a fountain spray oxygen is added to the pond which is excellent for aeration and water circulation.

Maintenance: The SuperFlo 2000/3000/4000 Pumps are cetrifugal pumps with a magnetic movement, driven by a watertight synchronous motor. They require minimum maintenance, only periodic cleaning of the filtering material and the rotor. Remember, before doing any work on your pump you MUST turn it off! To clean the filtering material, simply remove the filter and rinse the sponge.To clean the rotor, after having removed the filter, release the cover B by turning it counter-clockwise and take out the rotor. Wash everything in lukewarm water, using a soft brush to remove any deposits of scale. Then reassemble the parts. Attention! The ceramic shaft on which the rotor turns may be removed for cleaning, as it is secured at the two ends by two rubber red caps. As with the other parts, wash in lukewarm water using a soft brush to remove scale build up.

The SuperFlo 5000 Pump is great for ponds sizes 900-1100 gallons. This is an all-in-one kit with everything you need to create beautiful water features in your pond. This energy efficient, submersible, magnetic-driven pump can accommodate a waterfall and create a fountain! This Superflo pump features four fountain heads, a flow diverter, telescopic rise, coupling, mechanical filter and tubing outlet and can hold the SuperGlo light! You can now add one or two extra filters to your pond kit to extend the life of your pump!

The motor is a permanent magnet-driven synchronous motor. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The pump also has water resistent ceramic shaft and brushes. The flow-rate can vary with the adjustable knob and this pump runs in silence with it's vibration-damping rubber pads. Because this pump has a fountain spray oxygen is added to the pond which is excellent for aeration and water circulation.

Maintenance: The SuperFlo 5000/6000 are centrifugal pumps suitable for large fountains and for large ponds. They require minimum maintenance - only periodic cleaning of the filter and the rotor. Remember, before doing any work on your pump, you must unplug it. If you have attached the pond lighting on the pump handle, you must remove it to avoid damaging it. To clean the filter, simply remove the filter and rinse it. To clean the impeller, release the pre-chamber and wash it in running water. Rinse all parts in lukewarm water, and use a soft brush to remove any scale or other build up.

The SuperFlo 6000 Pump is great for ponds sizes 1100-1500 gallons. This is an all-in-one kit with everything you need to create beautiful water features in your pond. This energy efficient, submersible, magnetic-driven pump can accommodate a waterfall and create a fountain! This Superflo pump features four fountain heads, a flow diverter, telescopic rise, coupling, mechanical filter and tubing outlet and can hold the SuperGlo light! You can now add one or two extra filters to your pond kit to extend the life of your pump!

The motor is a permanent magnet-driven synchronous motor. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The pump also has water resistent ceramic shaft and brushes. The flow-rate can vary with the adjustable knob and this pump runs in silence with it's vibration-damping rubber pads. Because this pump has a fountain spray oxygen is added to the pond which is excellent for aeration and water circulation.

Maintenance: The SuperFlo 5000/6000 are centrifugal pumps suitable for large fountains and for large ponds. They require minimum maintenance - only periodic cleaning of the filter and the rotor. Remember, before doing any work on your pump, you must unplug it. If you have attached the pond lighting on the pump handle, you must remove it to avoid damaging it. To clean the filter, simply remove the filter and rinse it. To clean the impeller, release the pre-chamber and wash it in running water. Rinse all parts in lukewarm water, and use a soft brush to remove any scale or other build up.

The MaxFlo 5000 Waterfall Pump has a magnetic driven motor for extended life and increased durability. Thehorizontal pump can be positioned vertically for various pond configurations. The filter grid protects the motor from any large debris. With their versatility and extreme power, this pump is the best option to meet today’s growing demand for pond waterfalls.

The MaxFlo pump features barbed fittings for various tubing sizes, a filter grid, vortex impeller and an easy carrying handle. This powerful solids-handling, magnet-driven waterfall pump is mandatory for any waterfall or watercourse. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The MaxFlo line of waterfall pond pumps can either used as submersible units, or fit into your skimmer.

Maintenance: To clean pump unplug from electrical outlet. Use a small soft brush or place under water stream to remove debris. Periodically monitor the water and change water according to water quality to prevent water from forming micro-organisms.

The MaxFlo 9000 Waterfall Pump has a magnetic driven motor for extended life and increased durability. Thehorizontal pump can be positioned vertically for various pond configurations. The filter grid protects the motor from any large debris. With their versatility and extreme power, this pump is the best option to meet today’s growing demand for pond waterfalls.

The MaxFlo pump features barbed fittings for various tubing sizes, a filter grid, vortex impeller and an easy carrying handle. This powerful solids-handling, magnet-driven waterfall pump is mandatory for any waterfall or watercourse. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The MaxFlo line of waterfall pond pumps can either used as submersible units, or fit into your skimmer.

Maintenance: To clean pump unplug from electrical outlet. Use a small soft brush or place under water stream to remove debris. Periodically monitor the water and change water according to water quality to prevent water from forming micro-organisms.

The MaxFlo 12000 Waterfall Pump has a magnetic driven motor for extended life and increased durability. Thehorizontal pump can be positioned vertically for various pond configurations. The filter grid protects the motor from any large debris. With their versatility and extreme power, this pump is the best option to meet today’s growing demand for pond waterfalls.

The MaxFlo pump features barbed fittings for various tubing sizes, a filter grid, vortex impeller and an easy carrying handle. This powerful solids-handling, magnet-driven waterfall pump is mandatory for any waterfall or watercourse. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The MaxFlo line of waterfall pond pumps can either used as submersible units, or fit into your skimmer.

Maintenance: To clean pump unplug from electrical outlet. Use a small soft brush or place under water stream to remove debris. Periodically monitor the water and change water according to water quality to prevent water from forming micro-organisms.

The MaxFlo 16000 Waterfall Pump has a magnetic driven motor for extended life and increased durability. Thehorizontal pump can be positioned vertically for various pond configurations. The filter grid protects the motor from any large debris. With their versatility and extreme power, this pump is the best option to meet today’s growing demand for pond waterfalls.

The MaxFlo pump features barbed fittings for various tubing sizes, a filter grid, vortex impeller and an easy carrying handle. This powerful solids-handling, magnet-driven waterfall pump is mandatory for any waterfall or watercourse. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The MaxFlo line of waterfall pond pumps can either used as submersible units, or fit into your skimmer.

Maintenance: To clean pump unplug from electrical outlet. Use a small soft brush or place under water stream to remove debris. Periodically monitor the water and change water according to water quality to prevent water from forming micro-organisms.

The MaxFlo 20000 Waterfall Pump has a magnetic driven motor for extended life and increased durability. Thehorizontal pump can be positioned vertically for various pond configurations. The filter grid protects the motor from any large debris. With their versatility and extreme power, this pump is the best option to meet today’s growing demand for pond waterfalls.

The MaxFlo pump features barbed fittings for various tubing sizes, a filter grid, vortex impeller and an easy carrying handle. This powerful solids-handling, magnet-driven waterfall pump is mandatory for any waterfall or watercourse. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The MaxFlo line of waterfall pond pumps can either used as submersible units, or fit into your skimmer.

Maintenance: To clean pump unplug from electrical outlet. Use a small soft brush or place under water stream to remove debris. Periodically monitor the water and change water according to water quality to prevent water from forming micro-organisms.

This Micra Statuary Pump - 90 GPH is a magnetic driven pump with built-in filters and flow control devices. This low-wattage pump allows for reduced energy consumption. Statuary Pumps are great for both indoor and outdoor use and provide steady water flow to decorative fountains and small water features. For optimal function a minimum water height of approximately 2 cm is suggested. Capacity may be controlled by using the flow monitor system which allows for a precise incremental adjustment, depending on the need. It is ideal for statues and fountains, but can also be used to circulate the water for a small pond up to 300 gallons (provided the pond does not contain a waterfall or fish).

This pump features a suction base, flow control, mag-drive motor, 6' of cable and flow control. The permanent magnet-driven synchronous motor has earth-magnets in this motor that are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. This pump operates in silence with it's vibration-damping rubber pads and stays stable with suction cups on the bottom.

Maintenance: Statuary pumps are pumps with exceptional performance, ideal for use in small spaces thanks to their compact dimensions. Their maintenance requirements are minimum, but it is very important to maintain the pump to ensure correct operation. Before handling these pumps, turn off electrical power of any equipment immersed in water. For the Micra Pump the filter must be cleansed regularly or when water flow diminishes considerably. To clean, simply remove front case, rinse filtering material and reassemble using same procedure in reverse. Every three months, clean all other parts in warm water, delicately removing calcium deposits.

This Micra-Plus Statuary Pump - 158 GPH is a magnetic driven pump with built-in filters and flow control devices. This low-wattage pump allows for reduced energy consumption. Statuary Pumps are great for both indoor and outdoor use and provide steady water flow to decorative fountains and small water features. For optimal function a minimum water height of approximately 2 cm is suggested. Capacity may be controlled by using the flow monitor system which allows for a precise incremental adjustment, depending on the need. It is ideal for statues and fountains, but can also be used to circulate the water for a small pond up to 300 gallons (provided the pond does not contain a waterfall or fish).

This pump features a suction base, flow control, mag-drive motor, 6' of cable and flow control. The permanent magnet-driven synchronous motor has earth-magnets in this motor that are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. This pump operates in silence with it's vibration-damping rubber pads and stays stable with suction cups on the bottom.

Maintenance: Statuary pumps are pumps with exceptional performance, ideal for use in small spaces thanks to their compact dimensions. Their maintenance requirements are minimum, but it is very important to maintain the pump to ensure correct operation. Before handling these pumps, turn off electrical power of any equipment immersed in water. For the Micra-Plus Pump the filter must be cleansed regularly or when water flow diminishes considerably. To clean, simply remove front case, rinse filtering material and reassemble using same procedure in reverse. Every three months, clean all other parts in warm water, delicately removing calcium deposits.

This Nova Statuary Pump - 178 GPH is a magnetic driven pump with built-in filters and flow control devices. This low-wattage pump allows for reduced energy consumption. Statuary Pumps are great for both indoor and outdoor use and provide steady water flow to decorative fountains and small water features. It is ideal for statues and fountains, but can also be used to circulate the water for a small pond up to 300 gallons (provided the pond does not contain a waterfall or fish).

This pump features a suction base, flow control from 111-306 gallons per hour, mag-drive motor, 6' of cable and flow control. The permanent magnet-driven synchronous motor has earth-magnets in this motor that are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. This pump operates in silence with it's vibration-damping rubber pads and stays stable with suction cups on the bottom. This model has a fold-out base for extra stability. To open the support system, simply rotate it to close it, it is necessary to rotate it in the opposite direction by exerting certain effort.The pump is also endowed with a flow regulator which allows one to vary the capacity for a specific dose, as required by user.

Maintenance: Statuary pumps are pumps with exceptional performance, ideal for use in small spaces thanks to their compact dimensions. Their maintenance requirements are minimum, but it is very important to maintain the pump to ensure correct operation. Before handling these pumps, turn off electrical power of any equipment immersed in water. Every 2–3 months remove the front grill, delicately take out rotor and wash it entirely in warm water, taking out any calcareous deposits. Reassemble everything in reverse order.

This Idra Statuary Pump - 306 GPH is a magnetic driven pump with built-in filters and flow control devices. This low-wattage pump allows for reduced energy consumption. Statuary Pumps are great for both indoor and outdoor use and provide steady water flow to decorative fountains and small water features. It is ideal for statues and fountains, but can also be used to circulate the water for a small pond up to 300 gallons (provided the pond does not contain a waterfall or fish).

This pump features a suction base, flow control from 120-660 gallons per hour, mag-drive motor, 6' of cable and flow control. The permanent magnet-driven synchronous motor has earth-magnets in this motor that are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. This pump operates in silence with it's vibration-damping rubber pads and stays stable with suction cups on the bottom. This model has a fold-out base for extra stability. To open the support system, simply rotate it to close it, it is necessary to rotate it in the opposite direction by exerting certain effort.The pump is also endowed with a flow regulator which allows one to vary the capacity for a specific dose, as required by user.

Maintenance: Statuary pumps are pumps with exceptional performance, ideal for use in small spaces thanks to their compact dimensions. Their maintenance requirements are minimum, but it is very important to maintain the pump to ensure correct operation. Before handling these pumps, turn off electrical power of any equipment immersed in water. Every 2–3 months remove the front grill, delicately take out rotor and wash it entirely in warm water, taking out any calcareous deposits. Reassemble everything in reverse order.

This PressureFlo 1000 Filter is very powerful and is the perfect solution to pond pollution. With three filtration levels harmful bacteria and debris are filtered out of your pond leaving it healthy and clear! The filter with UV clarifier combines biological filtration, mechanical filtration, bioballs, and water clarification in a single unit.

This filter features adaptable tubing sizes (1/2", 3/4", and 1"), UV light, biological and mechanical filters, a filter trap, bio-balls and an indicator.

This pressurized pond filter is designed so that it can be used above ground, or partially buried to disguise it within your landscaping. The pressurized pond filter first pumps pressurized water through a UV clarifier to remove algae from your pond water, then the water is then forced through mechanical and biological foam filters to remove mechanical debris, and to maximize the growth of beneficial bacteria in your pond. Regular filters rely on pond pumps for filtration power; however, because the pressure of the water decreases with distance and height from the pump, filtration is non-optimal in these cases. A pressurized pond filter is a sealed unit that maximizes both the mechanical and biological filtration capacities by pressurizing the water and forcing it through the filtration media.

Maintenance: Your filter's bio-balls supply a habitat for micro-organisms (beneficial bacteria) that help in filtering your pond water. These micro-organisms cannot endure dry conditions or stagnant water, so the filter should be constantly supplied with running water. Long idle periods will lead to a reduction in the filtering performance. In the event that you have a long idle period, your filter may require a longer period of time before you will begin to see any results. Your bio-filter is equipped with a colour-coded pressure indicator located on the container lid. When your filter is operating effectively, the indicator will display GREEN. IF the flow rate within your filter drops, performance will decline and the pressure indicator will display RED. This means that it is time to clean your filtration media.

Winter care: Winterizing this product is very easy, simply remove the UV unit from the PressureFlo Filter. The UV unit should be stored inside in a dry warm place. This is to ensure that the bulb won’t crack or burn out over the winter months. Take special care not to touch the actual UV bulb and wrap it carefully to ensure not to break the bulb while storing it.

This PressureFlo 2000 Filter is very powerful and is the perfect solution to pond pollution. With three filtration levels harmful bacteria and debris are filtered out of your pond leaving it healthy and clear! The filter with UV clarifier combines biological filtration, mechanical filtration, bioballs, and water clarification in a single unit.

This filter features adaptable tubing sizes (1/2", 3/4", and 1"), UV light, biological and mechanical filters, a filter trap, bio-balls and an indicator.

This pressurized pond filter is designed so that it can be used above ground, or partially buried to disguise it within your landscaping. The pressurized pond filter first pumps pressurized water through a UV clarifier to remove algae from your pond water, then the water is then forced through mechanical and biological foam filters to remove mechanical debris, and to maximize the growth of beneficial bacteria in your pond. Regular filters rely on pond pumps for filtration power; however, because the pressure of the water decreases with distance and height from the pump, filtration is non-optimal in these cases. A pressurized pond filter is a sealed unit that maximizes both the mechanical and biological filtration capacities by pressurizing the water and forcing it through the filtration media.

Maintenance: Your filter's bio-balls supply a habitat for micro-organisms (beneficial bacteria) that help in filtering your pond water. These micro-organisms cannot endure dry conditions or stagnant water, so the filter should be constantly supplied with running water. Long idle periods will lead to a reduction in the filtering performance. In the event that you have a long idle period, your filter may require a longer period of time before you will begin to see any results. Your bio-filter is equipped with a colour-coded pressure indicator located on the container lid. When your filter is operating effectively, the indicator will display GREEN. IF the flow rate within your filter drops, performance will decline and the pressure indicator will display RED. This means that it is time to clean your filtration media.

Winter care: Winterizing this product is very easy, simply remove the UV unit from the PressureFlo Filter. The UV unit should be stored inside in a dry warm place. This is to ensure that the bulb won’t crack or burn out over the winter months. Take special care not to touch the actual UV bulb and wrap it carefully to ensure not to break the bulb while storing it.

This PressureFlo 4000 Filter is very powerful and is the perfect solution to pond pollution. With three filtration levels harmful bacteria and debris are filtered out of your pond leaving it healthy and clear! The filter with UV clarifier combines biological filtration, mechanical filtration, bioballs, and water clarification in a single unit.

This filter features adaptable tubing sizes (1/2", 3/4", and 1"), UV light, biological and mechanical filters, a filter trap, bio-balls and an indicator.

This pressurized pond filter is designed so that it can be used above ground, or partially buried to disguise it within your landscaping. The pressurized pond filter first pumps pressurized water through a UV clarifier to remove algae from your pond water, then the water is then forced through mechanical and biological foam filters to remove mechanical debris, and to maximize the growth of beneficial bacteria in your pond. Regular filters rely on pond pumps for filtration power; however, because the pressure of the water decreases with distance and height from the pump, filtration is non-optimal in these cases. A pressurized pond filter is a sealed unit that maximizes both the mechanical and biological filtration capacities by pressurizing the water and forcing it through the filtration media.

Maintenance: Your filter's bio-balls supply a habitat for micro-organisms (beneficial bacteria) that help in filtering your pond water. These micro-organisms cannot endure dry conditions or stagnant water, so the filter should be constantly supplied with running water. Long idle periods will lead to a reduction in the filtering performance. In the event that you have a long idle period, your filter may require a longer period of time before you will begin to see any results. Your bio-filter is equipped with a color-coded pressure indicator located on the container lid. When your filter is operating effectively, the indicator will display GREEN. IF the flow rate within your filter drops, performance will decline and the pressure indicator will display RED. This means that it is time to clean your filtration media.

Winter care: Winterizing this product is very easy, simply remove the UV unit from the PressureFlo Filter. The UV unit should be stored inside in a dry warm place. This is to ensure that the bulb won’t crack or burn out over the winter months. Take special care not to touch the actual UV bulb and wrap it carefully to ensure not to break the bulb while storing it.

The CrystalFlo Pump with UV Filter is an all-in-one unit that maintains cleanliness in your water garden. The CrystalFlo has both mechanical and biological filters as well as a UV light to kill free-floating algae. The unit is fully submersible and features a ball joint to level the fountain heads.

This pump features four fountain heads, a riser, diverter with ball joint featuer, a unit enclosure, biological and mechanical filter and a UV lamp. The CrystalFlo filter is a 650 GPH pond pump and a complete filtration solution at the same time! Ideal for ponds with fish, this all-in-one unit includes 4 fountain heads, and performs three different filtering actions: mechanical, biological and an anti-algae 9 Watt UV clarifier.

The permanent magnet-driven synchronous motor. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The mechanical filter is able to trap solid particles and keep the water clean and healthy for plants and fish. The biological filter is made of high-porosity bio media, which encourages beneficial bacteria to develop. A UV-C filter creates a water vortex around the UV-C lamp (protected by a quartz tube), which eliminates the algae which grows in a pond.

Maintenance: This pump with filter has to be maintained when the height of the water fountain feature decreases, generally every two months. To clean the filter open the upper lid and extract the sponge; wash the sponge with water bu DO NOT use solvents or detergents. To clean the pump it is necessary to remove it from the base of the unit; turn the rotor housing counterclockwise, extract the rotor taking care not lose the shock absorbers and the o-ring, wash the part using water and check the ware state turning the rotor keeping the shaft firm; turning has to be smooth; reassemble all the parts paying attention to the correct placing of all components. To clean the UV-C lamp unplug the unit, remove the upper lid, remove the lamp lid and use a scale-remover product-make sure the quartz tube has not been damaged. The light should be replaced each year.

This UV Clarifier - 13 Watts helps to maintain beautiful water clarity while reducing pond maintenance. The pond UV clarifier uses ultra-violet light to suspend particles and clump them together, which facilitates the filtration task of mechanical filters. Additionally, UV light in the pond UV Clarifier also helps to sterilize algae, which will keep your pond water clear and algae-free.

Features:

• Compact, durable, easy to install
• Energy efficient
• Patented water inlet design prevents direct impact of the particles on the glass tube
• Light indication lens

This UV Clarifier - 18 Watts helps to maintain beautiful water clarity while reducing pond maintenance. The pond UV clarifier uses ultra-violet light to suspend particles and clump them together, which facilitates the filtration task of mechanical filters. Additionally, UV light in the pond UV Clarifier also helps to sterilize algae, which will keep your pond water clear and algae-free.

Features:

• Compact, durable, easy to install
• Energy efficient
• Patented water inlet design prevents direct impact of the particles on the glass tube
• Light indication lens

The Liner Kit - 400 Gallons allows for easy installation, which promotes great creativity! This kit includes all the materials required to build a 400 gallon liner pond and a fountain!

Kit Includes:

• 10'x10' EPDM Liner
• 6'x10' Underlay
• 306 GPH Superflo 1300 Pump
• 3 Fountain Heads
• 45 mm Firestone Liner

Maintenance: Clean your pump regularly to prevent build up. If your pump stops working, unplug it and take it out of the pond. Follow the care instructions given in your pump kit box. If there is a lot of calcium build up on your pump it may stop working. To clean this simply place the pump motor (remove filter with case and Fountain Head) in vinegar water then plug it in. Let the pump run for about 30 seconds. Once cleaned rinse your pump with water and place back in pond. Winter care: Getting ready for winter may seem like an arduous task but if the right steps are taken it can be very beneficial to your pond and any life within it. During the fall months the pond should be kept free from fallen leaves and other debris that may rot and cause harmful toxins in your pond. Once the temperatures reach 43ºF outside it is time to winterize your pond. The first step is to remove any submersible pumps and clean them for winter storage. If you have fish the next step is to add a Pond Breather or Floating Pond Heater to circulate oxygen and release toxic gases. After the pond has been winterized and the ice has formed, there isn’t much work to be done during the winter months. The fish will naturally go to deeper depths of the pond where the water is warmer and require no feeding during these cold months.

The Liner Kit - 700 Gallons allows for easy installation, which promotes great creativity! This kit includes all the materials required to build a 400 gallon liner pond and a fountain!

Kit Includes:

• 10'x15' EPDM Liner
• 6'x10' Underlay
• 500 GPH Superflo 2000 Pump
• 4 Fountain Heads
• 45 mm Firestone Liner

Maintenance: Clean your pump regularly to prevent build up. If your pump stops working, unplug it and take it out of the pond. Follow the care instructions given in your pump kit box. If there is a lot of calcium build up on your pump it may stop working. To clean this simply place the pump motor (remove filter with case and Fountain Head) in vinegar water then plug it in. Let the pump run for about 30 seconds. Once cleaned rinse your pump with water and place back in pond. Winter care: Getting ready for winter may seem like an arduous task but if the right steps are taken it can be very beneficial to your pond and any life within it. During the fall months the pond should be kept free from fallen leaves and other debris that may rot and cause harmful toxins in your pond. Once the temperatures reach 43ºF outside it is time to winterize your pond. The first step is to remove any submersible pumps and clean them for winter storage. If you have fish the next step is to add a Pond Breather or Floating Pond Heater to circulate oxygen and release toxic gases. After the pond has been winterized and the ice has formed, there isn’t much work to be done during the winter months. The fish will naturally go to deeper depths of the pond where the water is warmer and require no feeding during these cold months.

Gathered around the pond, our animal Fish Spitter is painted with a beautiful patina finish, and will spit sparkling streams of water into your water garden. A spitter not only helps to circulate water, but it also incorporates the soothing splashing sound of water in your backyard, while adding a visually-appealing backdrop upon which to set your pond. Fountain spitters are the perfect addition to any garden pond!

Maintenance: Monthly maintenance will add to your pump’s life. To clean the pump, remove the front cover and the impeller. Use a small brush or stream of water to remove any debris. CAUTION: The pump shaft cannot be removed. If the pump fails to operate check the following: Check circuit breaker and try another outlet to ensure the pump is getting electrical power. Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose. Check the inlet to ensure it is not clogged with debris. Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not broken or jammed. NOTE: Ensure that the electrical cord loops below the electrical outlet to form a “Drip Loop”. This will prevent water from running down the cord and into the electrical outlet.

Gathered around the pond, our animal Turtle Spitter is painted with a beautiful patina finish, and will spit sparkling streams of water into your water garden. A spitter not only helps to circulate water, but it also incorporates the soothing splashing sound of water in your backyard, while adding a visually-appealing backdrop upon which to set your pond. Fountain spitters are the perfect addition to any garden pond!

Maintenance: Monthly maintenance will add to your pump’s life. To clean the pump, remove the front cover and the impeller. Use a small brush or stream of water to remove any debris. CAUTION: The pump shaft cannot be removed. If the pump fails to operate check the following: Check circuit breaker and try another outlet to ensure the pump is getting electrical power. Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose. Check the inlet to ensure it is not clogged with debris. Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not broken or jammed. NOTE: Ensure that the electrical cord loops below the electrical outlet to form a “Drip Loop”. This will prevent water from running down the cord and into the electrical outlet.

Gathered around the pond, our animal Duck Spitter is painted with a beautiful patina finish, and will spit sparkling streams of water into your water garden. A spitter not only helps to circulate water, but it also incorporates the soothing splashing sound of water in your backyard, while adding a visually-appealing backdrop upon which to set your pond. Fountain spitters are the perfect addition to any garden pond!

Maintenance: Monthly maintenance will add to your pump’s life. To clean the pump, remove the front cover and the impeller. Use a small brush or stream of water to remove any debris. CAUTION: The pump shaft cannot be removed. If the pump fails to operate check the following: Check circuit breaker and try another outlet to ensure the pump is getting electrical power. Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose. Check the inlet to ensure it is not clogged with debris. Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not broken or jammed. NOTE: Ensure that the electrical cord loops below the electrical outlet to form a “Drip Loop”. This will prevent water from running down the cord and into the electrical outlet.

Add some flare to your pond with the SuperGlo Underwater Light. Using this light is a beautiful way to accent your pond at night and this light is very bright and can light up any pond with a warm glow.

This lighting system includes a submersible halogen lamp, a 12 Volt, 20 Watt halogen bulb, four colored lenses, a large base for ballast support, suction cups, a power cable and a 120/12V transformer. Choose from red, yellow, blue or green lenses to accent the water. This light comes with suction cups so it can be attached to some pumps.

Maintenance: The SuperGlo Light requires minimal maintenance during the spring and summer months, however, it must be brought inside during the winter months. This is to ensure the light doesn’t crack over the winter. To bring the light in simply unplug the transformer and remove the light from the pond. Dry all parts of the light and transformer and store in a dry place.

Fits the following pumps and pond kits: Superflo 1300/2000 (500 gph), Folding Pond Kits 144/180 and Liner Kits 400/700.

Add some flare to your pond with the TripleGlo 3-Piece Underwater Light. Using this light is a beautiful way to accent your pond at night and this light is very bright and can light up any pond with a warm glow.

The TripleGlo lighting is unique in that each of the 3 lights are individually connected to the transformer to allow for easy placement in the pond. This systems features 3 submersible halogen lamps with bulbs, four colored lenses, bases for ballast support, suction cups on the base, power cable and 120/12V transformer.

Maintenance: The SuperGlo Light requires minimal maintenance during the spring and summer months, however, it must be brought inside during the winter months. This is to ensure the light doesn’t crack over the winter. To bring the light in simply unplug the transformer and remove the light from the pond. Dry all parts of the light and transformer and store in a dry place.

Fits the following pumps and pond kits: Superflo 1300/2000 (500 gph), Folding Pond Kits 144/180 and Liner Kits 400/700.

The Replacement Bulb -13 Watts works with the 13 Watt UV Clarifier.

The Replacement Bulb - 18 Watts works with the 18 Watt UV Clarifier.

These Replacement Sponge SuperFlo 800 - set of 2 work with the SuperFlo 800 (SICCE) series of pond pumps. 2 sponges per package.

These Replacement Sponge SuperFlo 1300 - set of 2 work with the SuperFlo 1300 (SICCE) series of pond pumps. 2 sponges per package.

These Replacement Sponge SuperFlo 2000/3000/4000 - set of 2 work with the SuperFlo 2000/3000/4000 (SICCE) series of pond pumps. 2 sponges per package.

These Replacement Sponge SuperFlo 5000/6000 - set of 2 work with the SuperFlo 5000/6000 (SICCE) series of pond pumps. 2 sponges per package.