Pumps

The SuperFlo 2000 Pond Pump is great for ponds sizes 200-400 gallons. This is an all-in-one kit with everything you need to create beautiful water features in your pond. This energy efficient, submersible, magnetic-driven pump can accommodate a stream, small waterfall and create a fountain! This Superflo pump features four fountain heads, a flow diverter, telescopic rise, coupling, mechanical filter and tubing outlet. You can now add one or two extra filters to your pond kit to extend the life of your pump!

The motor is a permanent magnet-driven synchronous motor. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The pump also has water resistent ceramic shaft and brushes. The flow-rate can vary with the adjustable knob and this pump runs in silence with it's vibration-damping rubber pads. Because this pump has a fountain spray oxygen is added to the pond which is excellent for aeration and water circulation.

Maintenance: The SuperFlo 2000/3000/4000 Pumps are cetrifugal pumps with a magnetic movement, driven by a watertight synchronous motor. They require minimum maintenance, only periodic cleaning of the filtering material and the rotor. Remember, before doing any work on your pump you MUST turn it off! To clean the filtering material, simply remove the filter and rinse the sponge.To clean the rotor, after having removed the filter, release the cover B by turning it counter-clockwise and take out the rotor. Wash everything in lukewarm water, using a soft brush to remove any deposits of scale. Then reassemble the parts. Attention! The ceramic shaft on which the rotor turns may be removed for cleaning, as it is secured at the two ends by two rubber red caps. As with the other parts, wash in lukewarm water using a soft brush to remove scale build up.

The SuperFlo 3000 Pond Pump is great for ponds sizes 400-700 gallons. This is an all-in-one kit with everything you need to create beautiful water features in your pond. This energy efficient, submersible, magnetic-driven pump can accommodate a stream, small waterfall and create a fountain! This Superflo pump features four fountain heads, a flow diverter, telescopic rise, coupling, mechanical filter and tubing outlet. You can now add one or two extra filters to your pond kit to extend the life of your pump!

The motor is a permanent magnet-driven synchronous motor. The earth-magnets in this motor are made from alloys of rare earth elements, which are substantially stronger than the ferrite magnets which inexpensive pumps utilize. The pump also has water resistent ceramic shaft and brushes. The flow-rate can vary with the adjustable knob and this pump runs in silence with it's vibration-damping rubber pads. Because this pump has a fountain spray oxygen is added to the pond which is excellent for aeration and water circulation.

Maintenance: The SuperFlo 2000/3000/4000 Pumps are cetrifugal pumps with a magnetic movement, driven by a watertight synchronous motor. They require minimum maintenance, only periodic cleaning of the filtering material and the rotor. Remember, before doing any work on your pump you MUST turn it off! To clean the filtering material, simply remove the filter and rinse the sponge.To clean the rotor, after having removed the filter, release the cover B by turning it counter-clockwise and take out the rotor. Wash everything in lukewarm water, using a soft brush to remove any deposits of scale. Then reassemble the parts. Attention! The ceramic shaft on which the rotor turns may be removed for cleaning, as it is secured at the two ends by two rubber red caps. As with the other parts, wash in lukewarm water using a soft brush to remove scale build up.

This Ultra 750 Pump is an ultra-magnetically driven (Mag Drive) pond pump, making it the ideal solution for use in decorative water features such as decorative stone, spitters, or brass. This water pump does not require a pre-filtration stage because it features a pre-filter system to prevent clogging and wear on the impeller. It is designed to be operated fully submerged and can be operated in line. Becuase it is made with environmentally friendly materials, they are fish safe and the motors are epoxy encapsulated, not oil filled.

Features and Benefits:

• Pumps 750 gallons per hour
• Can be used with or without a fountain head
• Flip up housing makes is easy to clean and maintain
• Ceramic shaft and bearings increase pump life

The PW-A Series PW100A Submersible Water Pump represents simple assistance and efficiency during many outdoor chores. This 100 watts water pump can be used for water circulation in ponds, lawn sprinkling, garden watering or car washing, dewatering the basement, trenches or excavation and construction sites.

Features:

• 100 watts water pump
• Composite construction & glass-filled housing
• Helpful with endless outdoor tasks
• Provides up to 21.1 gallons of water per minute

Perfect for outdoor tasks, this water pump has composite construction with a glass-filled polypropylene housing that both help to resist corrosion. Encouraging simple use and great efficiency, this pump features a cooling design to keep the motor running at a cooler temperature for a longer lasting life. Hosting a compact size and lightweight construction, this water pump is easy to transport for any necessary task.

This Ultra 1500 Pump is an ultra-magnetically driven (Mag Drive) pond pump, making it the ideal solution for use in decorative water features such as decorative stone, spitters, or brass. This water pump does not require a pre-filtration stage because it features a pre-filter system to prevent clogging and wear on the impeller. It is designed to be operated fully submerged and can be operated in line. Becuase it is made with environmentally friendly materials, they are fish safe and the motors are epoxy encapsulated, not oil filled.

Features and Benefits:

• Pumps 1500 gallons per hour
• Can be used with or without a fountain head
• Flip up housing makes is easy to clean and maintain
• Ceramic shaft and bearings increase pump life

The PW-A Series PW250A Submersible Water Pump represents simple assistance and efficiency during many outdoor chores. This 250 watts water pump can be used for water circulation in ponds, lawn sprinkling, garden watering or car washing, dewatering the basement, trenches or excavation and construction sites.

Features:

• 250 watts water pump
• Composite construction & glass-filled housing
• Helpful with endless outdoor tasks
• Provides up to 42.2 gallons of water per minute

Perfect for outdoor tasks, this water pump has composite construction with a glass-filled polypropylene housing that both help to resist corrosion. Encouraging simple use and great efficiency, this pump features a cooling design to keep the motor running at a cooler temperature for a longer lasting life. Hosting a compact size and lightweight construction, this water pump is easy to transport for any necessary task.

This Ultra 1000 Pump is an ultra-magnetically driven (Mag Drive) pond pump, making it the ideal solution for use in decorative water features such as decorative stone, spitters, or brass. This water pump does not require a pre-filtration stage because it features a pre-filter system to prevent clogging and wear on the impeller. It is designed to be operated fully submerged and can be operated in line. Becuase it is made with environmentally friendly materials, they are fish safe and the motors are epoxy encapsulated, not oil filled.

Features and Benefits:

• Pumps 1000 gallons per hour
• Can be used with or without a fountain head
• Flip up housing makes is easy to clean and maintain
• Ceramic shaft and bearings increase pump life

The AquaSurge 3000 Pump is ideal for use as a high flow pump. The unique design allows the pump to be used vertically or horizontally. It is suggested to used with medium to large ponds up to 3,000 gallons. The asynchronous motor design ensures that the impeller spins in only one direction; maximizing performance and reliability while minimizing electrical consumption.

Features and Benefits:

• Pumps 3196 gallons per hour
• Max head height of 14.76'
• Can be used vertically or horizontally
• Fish safe - uses no oil
• Comes with coupler, 90º elbow and power cord

This pump was designed for continuous use so it will provide years of trouble-free operation. The construction will not corrode or rust. And the small, compact design is perfect for use in skimmer and falls filter systems.

The AquaSurge 2000 Pump is ideal for use as a high flow pump. The unique design allows the pump to be used vertically or horizontally. It is suggested to used with medium to large ponds up to 13,000 gallons. The asynchronous motor design ensures that the impeller spins in only one direction; maximizing performance and reliability while minimizing electrical consumption.

Features and Benefits:

• Pumps 2000 gallons per hour
• Max head height of 22'
• Can be used vertically or horizontally
• Fish safe - uses no oil
• Comes with coupler, 90º elbow and power cord

The TQ 200 Pump is designed many applications with it's compact design and quiet operation. It can also be used for pressure boosting in residential, commercial and light industrial applications where low or inadequate water pressure exists.

It is suitable to be used with potable water or other clean or non-corrosive liquids.

The TQ is a complete, all-in-one unit, consisting of pump, motor, pressure tank, and electronic controller. The built-in electronic controller provides constant pressure which ensures that the pump starts automatically when water is consumed and operates continuously until water is not required.

The pump has a built in dry-run shut off with automatic reset function. The motor has built-in thermal overload to protect against high operating temperatures and over current. It also has an anti-cycling feature which prevents the pump from continuous starting and stopping when you have a dripping tap or minor leak in the system.

The AquaSurge 4000 Pump is ideal for use as a high flow pump. The unique design allows the pump to be used vertically or horizontally. It is suggested to used with medium to large ponds up to 4,000 gallons. The asynchronous motor design ensures that the impeller spins in only one direction; maximizing performance and reliability while minimizing electrical consumption.

Features and Benefits:

• Pumps 3947 gallons per hour
• Max head height of 18.5'
• Can be used vertically or horizontally
• Fish safe - uses no oil
• Comes with coupler, 90º elbow and power cord

The small, compact design of this pump is perfect for use in skimmer and falls fileter systems. The construcion will not corrode or rust, providing years of trouble-free operation.

The TQ 400 Pump is designed many applications with it's compact design and quiet operation. It can also be used for pressure boosting in residential, commercial and light industrial applications where low or inadequate water pressure exists.

It is suitable to be used with potable water or other clean or non-corrosive liquids.

The TQ is a complete, all-in-one unit, consisting of pump, motor, pressure tank, and electronic controller. The built-in electronic controller provides constant pressure which ensures that the pump starts automatically when water is consumed and operates continuously until water is not required.

The pump has a built in dry-run shut off with automatic reset function. The motor has built-in thermal overload to protect against high operating temperatures and over current. It also has an anti-cycling feature which prevents the pump from continuous starting and stopping when you have a dripping tap or minor leak in the system.

The AquaSurge 5000 Pump is ideal for use as a high flow pump. The unique design allows the pump to be used vertically or horizontally. It is suggested to used with medium to large ponds up to 13,000 gallons. The asynchronous motor design ensures that the impeller spins in only one direction; maximizing performance and reliability while minimizing electrical consumption.

Features and Benefits:

• Pumps 5000 gallons per hour
• Max head height of 19.5'
• Can be used vertically or horizontally
• Fish safe - uses no oil
• Comes with coupler, 90º elbow and power cord