The Osburn 2400 Wood Stove Insert is an impressive EPA approved wood insert with a heating capacity of up to 2,700 square feet, 12.5" of clearance in the firebox, and a burn time of up to 10 hours!

Features

• 130 CFM blower included
• 3.2 cubic foot firebox
• Max log length: 21"

In addition to its impressive performance, the Osburn 2400 Wood Stove Insert is environmentally efficient, with emissions as low as 1.6 g/hour. If you're looking for a large wood stove for your home or cottage this is the perfect choice.

 

• Fuel Type: Wood
• Heating Square Footage: 1000 - 2,700 sq. ft.
• Minimum Heat Output: 44,100 BTUs
• Maximum Heat Output: 100,000 BTUs
• Efficiency: 78%
• Material: Stainless Steel | Steel
• Color: Black
• Width: 31.125"
• Depth: 27.875"
• Height: 23.25"
• Firebox Width: 22.5"
• Firebox Depth: 15.125"
• Firebox Height: 13.5"
• Firebox Volume: 3.2 cu. ft.
• Log Size: 21"
• Minimum Fireplace Width: 31.625"
• Minimum Fireplace Depth: 16.25"
• Minimum Fireplace Height: 23.5"
• Burn Time: 8 - 10 hours
• Venting Diameter: 6"
• Washington State Approved: Yes
• EPA Approved: Yes
• Blower Included: Yes
• Blower CFM: 130 CFM
• Glass Viewing Area: 19.125" W x 8.875" H
• Certification: CSA Certified | EPA Certified | UL Listed | ULC Listed
• Items Included: 130 CFM blower

OSBURN LIMITED LIFETIME WARRANTY

The warranty of the manufacturer extends only to the original consumer purchaser and is not transferable. This warranty covers brand new products only, which have not been altered, modified nor repaired since shipment from factory. Proof of purchase (dated bill of sale), model name and serial number must be supplied when making any warranty claim to your OSBURN dealer.

This warranty applies to normal residential use only. Damages caused by misuse, abuse, improper installation, lack of maintenance, over firing, negligence or accident during transportation, power failures, downdrafts, or venting problems are not covered by this warranty.

This warranty does not cover any scratch, corrosion, distortion, or discoloration. Any defect or damage caused by the use of unauthorized parts or others than original parts void this warranty. An authorized qualified technician must perform the installation in accordance with the instructions supplied with this product and all local and national building codes. Any service call related to an improper installation is not covered by this warranty.

The manufacturer may require that defective products be returned or that digital pictures be provided to support the claim. Returned products are to be shipped prepaid to the manufacturer for investigation. If a product is found to be defective, the manufacturer will repair or replace such defect. Transportation fees to ship the product back to the purchaser will be paid by the manufacturer. Repair work covered by the warranty, executed at the purchaser’s domicile by an authorized qualified technician requires the prior approval of the manufacturer. Labor cost and repair work to the account of the manufacturer are based on predetermined rate schedule and must not exceed the wholesale price of the replacement part. All parts and labor costs covered by this warranty are limited according to the table below.

The manufacturer at its discretion may decide to repair or replace any part or unit after inspection and investigation of the defect. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of any warranted but defective parts. The manufacturer shall in no event be responsible for any special, indirect, consequential damages of any nature, which are in excess of the original purchase price of the product. A one-time replacement limit applies to all parts benefiting from a lifetime coverage. This warranty applies to products purchased after October 1st, 2011.

Description	Parts	Labor
Combustion chamber (welds only), castings, convector air-mate, ceramic glass (thermal breakage only*), and secondary air tubes (pictures required).	Lifetime	5 Years
Plating (defective manufacture) – Subject to limitations above (pictures required)	Lifetime	n/a
Stainless steel firebox components, surrounds and heat shields, ash drawer, steel legs, pedestal, trims (aluminum extrusions), C-Cast baffle*, and vermiculite baffle (pictures required).	7 Years	5 Years
Carbon steel firebox components, glass retainers, and handle assembly.	5 Years	3 Years
Blowers, heat sensors, switches, rheostat, wiring, and other controls.	2 Years	1 Years
Paint (peeling), gaskets, insulation, firebrick, and ceramic fibre blankets.	1 Year	n/a

Shall your unit or a components be defective, contact immediately your OSBURN dealer. Prior to your call make sure you have the following information necessary to your warranty claim treatment:

• Your name, address and telephone number;
• Bill of sale and dealer’s name;
• Serial number and model name as indicated on the nameplate fixed to the back of your unit;
• Nature of the defect and any relevant information.

Before shipping your unit or defective component to our plant, you must obtain from your OSBURN dealer an Authorization Number. Any merchandise received without authorization will be refused automatically and returned to sender.

Product Rating:  5 out of 5
Number of Reviews: 5