Fireplaces - Made in the USA

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Vent Free Firebox Kit. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Rated for 99.9% heating efficiency
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL listing standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for vent-free application, this firebox kit utilizes no vent, chimney, or flue, keeping all generated heat directly inside your home, and making for 99.9% energy efficiency. When installed in compliance with manufacturer instructions, all vent-free combustion by-products are safe to breathe. This unit arrives with a fuel line knock-out that can be placed on either side of the firebox—no on-sight drilling is required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Vent Free Firebox Kit. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Rated for 99.9% heating efficiency
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL listing standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for vent-free application, this firebox kit utilizes no vent, chimney, or flue, keeping all generated heat directly inside your home, and making for 99.9% energy efficiency. When installed in compliance with manufacturer instructions, all vent-free combustion by-products are safe to breathe. This unit arrives with a fuel line knock-out that can be placed on either side of the firebox—no on-sight drilling is required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Vent Free Firebox Kit. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Rated for 99.9% heating efficiency
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL listing standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for vent-free application, this firebox kit utilizes no vent, chimney, or flue, keeping all generated heat directly inside your home, and making for 99.9% energy efficiency. When installed in compliance with manufacturer instructions, all vent-free combustion by-products are safe to breathe. This unit arrives with a fuel line knock-out that can be placed on either side of the firebox—no on-sight drilling is required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 24" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 24” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 24" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 24” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 30" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 30” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 43" Pre-cast Masonry See-Thru B-Vent Firebox Kit w/ Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 30” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your hearth the clean finish it deserves with the 48" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

12 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 42" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 30" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

Give your hearth the clean finish it deserves with the 48" Engineered Vent-free Masonry Fireplace System. Designed for burning ventless gas logs, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

12 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 42" Engineered Vent-free Masonry Fireplace System. Designed for burning ventless gas logs, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 36" Engineered Vent-free Masonry Fireplace System. Designed for burning ventless gas logs, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 30" Engineered Vent-free Masonry Fireplace System. Designed for burning ventless gas logs, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

5 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 48" Engineered Ventless See-Thru Masonry Fireplace System. Bringing warmth and light to both sides of the ventless firebox, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Two-sided firebox with a single flue
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

12 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 42" Engineered Ventless See-Thru Masonry Fireplace System. Bringing warmth and light to both sides of the ventless firebox, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Two-sided firebox with a single flue
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 36" Engineered Ventless See-Thru Masonry Fireplace System. Bringing warmth and light to both sides of the ventless firebox, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Two-sided firebox with a single flue
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 30" Engineered Ventless See-Thru Masonry Fireplace System. Bringing warmth and light to both sides of the ventless firebox, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Two-sided firebox with a single flue
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

5 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Enjoy a full-size fireplace with the convenience of vent free installation with the VFH Vent Free Fireplace - 42". The VFH series features the exclusive Triple Play Burner System, for an authentic glow that creates a stunning focal point for any room.

Features:

• Heating output: 38,000 BTUs with NG/34,000 BTUs with LP
• Heating capacity: up to 2400 sq. ft. with NG/2200 sq. ft. with LP
• Millivolt ignition system on all models
• CSA design certified

This fireplace features the Triple Play Burner System that offers a full, yellow flame with a unique triple effect that delivers an authentic randomly flickering glow. The burner system provides loose embers, glowing logs and yellow flames all in one complete package. This unit also comes complete with a fixed screen, concealed controls, a black trim kit, removable louvers, flex connector and junction box. The full-featured control panel conveniently lifts off, so you can add a blower or other upgrades with ease.

This vent free fireplace does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 47" W x 34.5" H x 18" D (actual)
• 47.25" W x 35" H x 17.5" D (framing)
• 40" W x 21.75" H (viewing area)

Enjoy a full-size fireplace with the convenience of vent free installation with the VFH Vent Free Fireplace - 36". The VFH series features the exclusive Triple Play Burner System, for an authentic glow that creates a stunning focal point for any room.

Features:

• Heating output: 38,000 BTUs with NG/34,000 BTUs with LP
• Heating capacity: up to 2400 sq. ft. with NG/2200 sq. ft. with LP
• Millivolt ignition system on all models
• CSA design certified

This fireplace features the Triple Play Burner System that offers a full, yellow flame with a unique triple effect that delivers an authentic randomly flickering glow. The burner system provides loose embers, glowing logs and yellow flames all in one complete package. This unit also comes complete with a fixed screen, concealed controls, a black trim kit, removable louvers, flex connector and junction box. The full-featured control panel conveniently lifts off, so you can add a blower or other upgrades with ease.

This vent free fireplace does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 41" W x 34.5" H x 18" D (actual)
• 41.25" W x 35" H x 17.5" D (framing)
• 34" W x 21.75" H (viewing area)

Enjoy a full-size fireplace with the convenience of vent free installation with the VFH Vent Free Fireplace - 32". The VFH series features the exclusive Triple Play Burner System, for an authentic glow that creates a stunning focal point for any room.

Features:

• Heating output: 38,000 BTUs with NG/34,000 BTUs with LP
• Heating capacity: up to 2400 sq. ft. with NG/2200 sq. ft. with LP
• Millivolt ignition system on all models
• CSA design certified

This fireplace features the Triple Play Burner System that offers a full, yellow flame with a unique triple effect that delivers an authentic randomly flickering glow. The burner system provides loose embers, glowing logs and yellow flames all in one complete package. This unit also comes complete with a fixed screen, concealed controls, a black trim kit, removable louvers, flex connector and junction box. The full-featured control panel conveniently lifts off, so you can add a blower or other upgrades with ease.

This vent free fireplace does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 37" W x 34.5" H x 16" D (actual)
• 37.25" W x 35" H x 15.5" D (framing)
• 29.875" W x 21.75" H (viewing area)

With the Universal Radiant Vent Free Firebox - 42" you can instantly transform your living area. This firebox comes complete with a clean face designed firebox, interior firebrick a black hood and junction box. The zero-clearance design allows you to create an authentic, built-in look.

Features:

• Expansive viewing area
• Easy to incorporate into your design requirements
• Can be installed with non-combustible material up to the opening of fireplace for true masonry look
• CSA design certified

This vent free firebox does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 47" W x 34.5" H x 18" D (actual)
• 40" W x 21.875" H x 15.75" D (hearth dimensions)
• 40" W x 21.75" H (viewing area)

With the Universal Radiant Vent Free Firebox - 36" you can instantly transform your living area. This firebox comes complete with a clean face designed firebox, interior firebrick a black hood and junction box. The zero-clearance design allows you to create an authentic, built-in look.

Features:

• Expansive viewing area
• Easy to incorporate into your design requirements
• Can be installed with non-combustible material up to the opening of fireplace for true masonry look
• CSA design certified

This vent free firebox does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 41" W x 34.5" H x 18" D (actual)
• 34" W x 21.875" H x 15.75" D (hearth dimensions)
• 34" W x 21.75" H (viewing area)

With the Universal Radiant Vent Free Firebox - 32" you can instantly transform your living area. This firebox comes complete with a clean face designed firebox, interior firebrick a black hood and junction box. The zero-clearance design allows you to create an authentic, built-in look.

Features:

• Expansive viewing area
• Easy to incorporate into your design requirements
• Can be installed with non-combustible material up to the opening of fireplace for true masonry look
• CSA design certified

This vent free firebox does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 37" W x 34.5" H x 16" D (actual)
• 29.875" W x 21.875" H x 13.25" D (hearth dimensions)
• 29.875" W x 21.75" H (viewing area)

With the Universal Louvered Vent Free Firebox - 42" you can instantly transform your living area. This firebox comes complete with louvers, interior firebrick a black hood and junction box. The zero-clearance design allows you to create an authentic, built-in look.

Features:

• Expansive viewing area
• Easy to incorporate into your design requirements
• Can be installed with non-combustible material up to the opening of fireplace for true masonry look
• CSA design certified

This vent free firebox does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 47" W x 34.5" H x 18" D (actual)
• 40" W x 21.875" H x 15.75" D (hearth dimensions)
• 40" W x 21.75" H (viewing area)

With the Universal Louvered Vent Free Firebox - 36" you can instantly transform your living area. This firebox comes complete with louvers, interior firebrick a black hood and junction box. The zero-clearance design allows you to create an authentic, built-in look.

Features:

• Expansive viewing area
• Easy to incorporate into your design requirements
• Can be installed with non-combustible material up to the opening of fireplace for true masonry look
• CSA design certified

This vent free firebox does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 41" W x 34.5" H x 18" D (actual)
• 34" W x 21.875" H x 15.75" D (hearth dimensions)
• 34" W x 21.75" H (viewing area)

With the Universal Louvered Vent Free Firebox - 32" you can instantly transform your living area. This firebox comes complete with louvers, interior firebrick a black hood and junction box. The zero-clearance design allows you to create an authentic, built-in look.

Features:

• Expansive viewing area
• Easy to incorporate into your design requirements
• Can be installed with non-combustible material up to the opening of fireplace for true masonry look
• CSA design certified

This vent free firebox does not require an outside venting system to operate. It draws combustion air from inside the room and is designed to burn up to 99.9% efficiently, eliminating the need for outside exhaust.

Dimensions:

• 37" W x 34.5" H x 16" D (actual)
• 29.875" W x 21.875" H x 13.25" D (hearth dimensions)
• 29.875" W x 21.75" H (viewing area)

Offering a sleek modern design the Echelon See-Thru Direct Vent Fireplace - 42" provides the perfect solution for any two rooms! The Echelon See-Thru can be installed between two interior rooms or between an interior and exterior room – making it the only linear see-thru fireplace available on the market today that offers this dynamic design feature.

Features:

• Heat output: 34,000 BTUs
• Heating capacity: 1330 sq.ft. with NG/1300 sq. ft. with LP
• CSA design certified
• Signature Command electronic ignition

Contemporary touches such as the natural stone or glass kits, black porcelain panels and wide-view styling, make modern serenity efficient, convenient and beautiful. The Echelon fireplaces offer an incredibly wide viewing area with a surprisingly compact design, so they can be installed in almost any space. This fireplace is eye-catching, but is also a very efficient heating source - up to 80% - so you and your family can enough the warmth of the contemporary fireplace.

Dimensions:

• 51.25" W x 38.375" H x 17.375" D (actual)
• 51.75" W x 38.5" H x 17.375" D (framing)
• 36.125" W x 13.75" H (viewing)

The Echelon Direct Vent Fireplace - 60" delivers ultra-contemporary style in a wide format that allows you to view your fire from almost any angle. With the modern style and leading-edge technology, the Echelon offers the next step in direct vent fireplace style.

Features:

• Heat output: 45,000 BTUs
• Heating capacity: 2000 sq. ft. with NG/1850 sq. ft. with LP
• CSA design certified
• Signature Command electronic ignition

With an incredible wide viewing area, but surprisingly compact size, the Echelon can be installed in just about any space. Offering standard stylish contemporary bronze glass beads and natural stone kit, as well as the convenience of anti-reflective ceramic glass with a quick latch design for easy access, the Echelon fits perfectly into any modern décor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 57.125" W x 35.4375" H x 18.1875" D (actual)
• 57.625" W x 35.625" H x 18.625" D (framing)
• 47.125" W x 13.75" H (viewing area)

The Echelon Direct Vent Fireplace - 42" delivers ultra-contemporary style in a wide format that allows you to view your fire from almost any angle. With the modern style and leading-edge technology, the Echelon offers the next step in direct vent fireplace style.

Features:

• Heat output: 34,000 BTUs
• Heating capacity: 1400 sq. ft. with NG/1430 sq. ft. with LP
• CSA design certified
• Signature Command electronic ignition

With an incredible wide viewing area, but surprisingly compact size, the Echelon can be installed in just about any space. Offering standard stylish contemporary bronze glass beads and natural stone kit, as well as the convenience of ceramic glass panel with a quick latch design for easy access, the Echelon fits perfectly into any modern décor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 46.125" W x 35.4375" H x 18.1875" D (actual)
• 46.625" W x 35.625" H x 17.875" D (framing)
• 36.125" W x 13.75" H (viewing area)

Combine the warmth and comfort of a burning fire with the sophisticated style of modern design. This beautiful Pearl Designer Left Corner Direct Vent Fireplace - 36" adds an elegant statement piece to your home.

Features:

• Heat output: 36,000 BTUs
• Heating capacity: 1450 sq.ft. sq. ft. with NG/1630 sq. ft. with LP
• CSA Design Certified
• Signature Command electronic ignition

This fireplace will give your home a fire viewing experience with a fresh perspective. The corner design allows you to view the realistic log set and dancing flames from two side views. With a thermal efficiency up to 80% you and your family are sure to stay warm on cool winter nights.

Choose from three firebrick options, and add a contemporary stone/glass kit to modernize your fireplace and decor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 44" W x 40.9375" H x 23.75" D (actual)
• 46.625" W x 48.1875" H x 23" D (framing)
• 28.25" W x 35.5625" H (viewing area)

Combine the warmth and comfort of a burning fire with the sophisticated style of modern design. This beautiful Pearl Designer Right Corner Direct Vent Fireplace - 36" adds an elegant statement piece to your home.

Features:

• Heat output: 36,000 BTUs
• Heating capacity: 1450 sq.ft. sq. ft. with NG/1630 sq. ft. with LP
• CSA Design Certified
• Signature Command electronic ignition

This fireplace will give your home a fire viewing experience with a fresh perspective. The corner design allows you to view the realistic log set and dancing flames from two side views. With a thermal efficiency up to 80% you and your family are sure to stay warm on cool winter nights.

Choose from three firebrick options, and add a contemporary stone/glass kit to modernize your fireplace and decor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 44" W x 40.9375" H x 23.75" D (actual)
• 46.625" W x 48.1875" H x 23" D (framing)
• 28.25" W x 35.5625" H (viewing area)

Combine the warmth and comfort of a burning fire with the sophisticated style of modern design. This beautiful Pearl Designer Peninsula Direct Vent Fireplace - 36" adds an elegant statement piece to your home.

Features:

• Heat output: 36,000 BTUs
• Heating capacity: 1450 sq.ft. sq. ft. with NG/1630 sq. ft. with LP
• CSA Design Certified
• Signature Command electronic ignition

This fireplace will give your home a fire viewing experience with a fresh perspective. The peninsula design allows you to view the realistic log set and dancing flames from multiple views. With a thermal efficiency up to 80% you and your family are sure to stay warm on cool winter nights.

Choose from three firebrick options, and add a contemporary stone/glass kit to modernize your fireplace and decor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 44" W x 40.9375" H x 23.75" D (actual)
• 46.625" W x 48.1875" H x 23" D (framing)
• 28.25" W x 35.5625" H (viewing area)

Combine the warmth and comfort of a burning fire with the sophisticated style of modern design. This beautiful Pearl Designer See-Thru Direct Vent Fireplace - 36" adds an elegant statement piece to your home.

Features:

• Heat output: 36,000 BTUs
• Heating capacity: 1450 sq.ft. sq. ft. with NG/1630 sq. ft. with LP
• CSA Design Certified
• Signature Command electronic ignition

This fireplace will give your home a fire viewing experience with a fresh perspective. The see-thru design with tempered glass allows you to view the realistic log set and dancing flames through two separate rooms. With a thermal efficiency up to 80% you and your family are sure to stay warm on cool winter nights.

Choose from three firebrick options, and add a contemporary stone/glass kit to modernize your fireplace and decor.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 44" W x 40.9375" H x 23.75" D (actual)
• 50.0625" W x 48.1875" H x 23" D (framing)
• 28.25" W x 35.5625" H (viewing area)

Bring a dramatic look to both an indoor or outdoor setting with the Marquis Clear View See-Thru Direct Vent Fireplace - 48"! The clean, face design will double your viewable area with two non-reflective ceramic glass sides that provide a pass-through effect.

Features:

• Heat output: 56,000 BTUs
• Heating capacity: 2780 sq. ft. with NG/2700 sq. ft. with LP
• Signature Command electronic ignition
• CSA design certified

With 2160 square inches of viewing area and the ability to be installed on an outside wall, the Marquis See-Thru fireplace is an incredible addition to any two rooms - indoors or out! View the dancing flames and realistic logs through clear-view ceramic glass and adjust the accent light using the manual dimmer to set the perfect mood.

Choose from three firebrick options, optional stainless steel outdoor facing kit and decorative arched doors with hand forged designer inlays to complete your fireplace look and make the Marquis See-Thru truly your own.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 49.5" W x 44.5" H x 24" D (actual)
• 55.5" W x 50.5625" H x 24.5" D (framing)
• 36" W x 30" H (viewing area)

The Marquis Clear View Direct Vent Signature Command Fireplace - 60" has a clean face design and wide-open flame presentation that will fit right at home in any room! The clear-view ceramic glass provides an unobstructed view of the fire's glow.

Features:

• Heat output: 60,000 BTUs
• Heating capacity: 3100 sq. ft. with NG/2900 sq. ft. with LP
• Signature Command electronic ignition
• CSA design certified

Customize your fireplace with any one of three unique firebrick options and add a decorative door kit and/or andiron kit to create a traditional look. The Marquis fireplace features an accent light with dimmer controls you can use to create a cozy atmosphere.

This fireplace delivers a range of BTUs, so you'll stay nice and warm while efficiently heating the room to help lower heating costs. The Marquis is changing the face of fireplace design. Its louverless clean face combined with an expansive viewing area ensures that the incredibly life-like flames are the true focal point in any room. Designed to suit any décor this fireplace is right at home regardless of taste or style.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 55" W x 50.3125" H x 24.25" D (actual)
• 55.5" W x 50.5625" H x 24.5 D (framing)
• 42" W x 36" H (viewing area)

The Marquis Clear View Direct Vent Signature Command Fireplace - 48" has a clean face design and wide-open flame presentation that will fit right at home in any room! The clear-view ceramic glass provides an unobstructed view of the fire's glow.

Features:

• Heat output: 50,000 BTUs
• Heating capacity: 2500 sq. ft. with NG/2300 sq. ft. with LP
• Signature Command electronic ignition
• CSA design certified

Customize your fireplace with any one of three unique firebrick options and add a decorative door kit and/or andiron kit to create a traditional look. The Marquis fireplace features an accent light with dimmer controls you can use to create a cozy atmosphere.

This fireplace delivers a range of BTUs, so you'll stay nice and warm while efficiently heating the room to help lower heating costs. The Marquis is changing the face of fireplace design. Its louverless clean face combined with an expansive viewing area ensures that the incredibly life-like flames are the true focal point in any room. Designed to suit any décor this fireplace is right at home regardless of taste or style.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 48.9375" W x 44.375" H x 23.875" D (actual)
• 49.3125" W x 44.75" H x 23.875 D (framing)
• 36" W x 30" H (viewing area)

The Marquis Clear View Direct Vent Signature Command Fireplace - 44" has a clean face design and wide-open flame presentation that will fit right at home in any room! The clear-view ceramic glass provides an unobstructed view of the fire's glow.

Features:

• Heat output: 40,000 BTUs
• Heating capacity: 1900 sq. ft. with NG/2100 sq. ft. with LP
• Signature Command electronic ignition
• CSA design certified

Customize your fireplace with any one of three unique firebrick options and add a decorative door kit and/or andiron kit to create a traditional look. The Marquis fireplace features an accent light with dimmer controls you can use to create a cozy atmosphere.

This fireplace delivers a range of BTUs, so you'll stay nice and warm while efficiently heating the room to help lower heating costs. The Marquis is changing the face of fireplace design. Its louverless clean face combined with an expansive viewing area ensures that the incredibly life-like flames are the true focal point in any room. Designed to suit any décor this fireplace is right at home regardless of taste or style.

No other system offers as many available features as the Total Signature Command (TSC) System - adjust the three-step flame. Enjoy A/C functionality with automatic battery backup, adjust the blower speed, accent light, and control rear burner shut off without getting up from your couch. This system also includes cold climate pilot options and touch button command center.

Dimensions:

• 44.9375" W x 44.375" H x 23.875" D (actual)
• 45.3125" W x 44.75" H x 23.875 D (framing)
• 32" W x 30" H (viewing area)

The Marquis Clear View Direct Vent Millivolt Fireplace - 48" has a clean face design and wide-open flame presentation that will fit right at home in any room! The clear-view ceramic glass provides an unobstructed view of the fire's glow.

Features:

• Heat output: 50,000 BTUs
• Heating capacity: 2400 sq. ft. with NG/2240 sq. ft. with LP
• Millivolt ignition
• CSA design certified

Customize your fireplace with any one of three unique firebrick options and add a decorative door kit and/or andiron kit to create a traditional look. The Marquis fireplace features an accent light with dimmer controls you can use to create a cozy atmosphere.

This fireplace delivers a range of BTUs, so you'll stay nice and warm while efficiently heating the room to help lower heating costs. The Marquis is changing the face of fireplace design. Its louverless clean face combined with an expansive viewing area ensures that the incredibly life-like flames are the true focal point in any room. Designed to suit any décor this fireplace is right at home regardless of taste or style.

Dimensions:

• 48.9375" W x 44.375" H x 23.875" D (actual)
• 49.3125" W x 44.75" H x 23.875 D (framing)
• 36" W x 30" H (viewing area)

The Marquis Clear View Direct Vent Millivolt Fireplace - 44" has a clean face design and wide-open flame presentation that will fit right at home in any room! The clear-view ceramic glass provides an unobstructed view of the fire's glow.

Features:

• Heat output: 40,000 BTUs
• Heating capacity: 1800 sq. ft. with NG/2000 sq. ft. with LP
• Millivolt ignition
• CSA design certified

Customize your fireplace with any one of three unique firebrick options and add a decorative door kit and/or andiron kit to create a traditional look. The Marquis fireplace features an accent light with dimmer controls you can use to create a cozy atmosphere.

This fireplace delivers a range of BTUs, so you'll stay nice and warm while efficiently heating the room to help lower heating costs. The Marquis is changing the face of fireplace design. Its louverless clean face combined with an expansive viewing area ensures that the incredibly life-like flames are the true focal point in any room. Designed to suit any décor this fireplace is right at home regardless of taste or style.

Dimensions:

• 44.9375" W x 44.375" H x 23.875" D (actual)
• 45.3125" W x 44.75" H x 23.875 D (framing)
• 32" W x 30" H (viewing area)

Give people a place to gather with the MLDV Onyx Direct Vent Fireplace - 42". Make the fireplace the focal point of your room with the warmth and dancing flames of the Onyx.

Features:

• Heat output: 34,000 BTUs
• Heating capacity: 1550 sq.ft.. with NG/1660 sq.ft.. with LP
• CSA design certified
• Signature Command electronic ignition

With a Natural Blaze burner the dancing flames will accent glowing ceramic fiber logs and a large ember bed. This fireplace will not only look great it has a thermal efficiency up to 80%. The fireplace can be installed for a vertical or horizontal application (rear/top convertible) so it will fit your home!

The Signature Command System is an electronic ignition with an automatic battery backup system. This system has a hi/lo, three step flame adjustment. The system comes standard with 15' of wire and an on/off wall switch.

Dimensions:

• 41" W x 50.75" H x 22.25" D (actual)
• 42.5" W x 50.875" H x 22.25" D (framing)
• 33" W x 27.625" H (viewing area)

Nothing invites or delights like the dancing flames of the DVM Cameo Direct Vent Fireplace - 47". Create a cozy centerpiece for your home with this fireplace. the large format provides a wide viewable area and a range of customization options allow you to create a look that's uniquely yours.

Features:

• Heat output: 32,000 BTUs
• Heating capacity: 1500 sq.ft.. with NG/1600 sq.ft.. with LP
• CSA design certified
• Signature Command electronic ignition

With a Natural Blaze burner the dancing flames will accent glowing ceramic fiber logs and a large ember bed. This fireplace will not only look great it has a thermal efficiency up to 80%. The fireplace can be installed for a vertical or horizontal application (rear/top convertible) so it will fit your home!

The Signature Command System is an electronic ignition with an automatic battery backup system. This system has a hi/lo, three step flame adjustment. The system comes standard with 15' of wire and an on/off wall switch.

Dimensions:

• 47" W x 46.3125" H x 22.3125" D (actual)
• 48.0625" W x 46.5" H x 20.375" D (framing)
• 38.9375" W x 23.1875" H (viewing area)

Nothing invites or delights like the dancing flames of the DVM Cameo Direct Vent Fireplace - 42". Create a cozy centerpiece for your home with this fireplace. the large format provides a wide viewable area and a range of customization options allow you to create a look that's uniquely yours.

Features:

• Heat output: 30,000 BTUs
• Heating capacity: 1500 sq.ft.. with NG/1600 sq.ft.. with LP
• CSA design certified
• Signature Command electronic ignition

With a Natural Blaze burner the dancing flames will accent glowing ceramic fiber logs and a large ember bed. This fireplace will not only look great it has a thermal efficiency up to 80%. The fireplace can be installed for a vertical or horizontal application (rear/top convertible) so it will fit your home!

The Signature Command System is an electronic ignition with an automatic battery backup system. This system has a hi/lo, three step flame adjustment. The system comes standard with 15' of wire and an on/off wall switch.

Dimensions:

• 41" W x 46.3125" H x 22.3125" D (actual)
• 42.0625" W x 41.625" H x 20.375" D (framing)
• 32.9375" W x 20.1875" H (viewing area)

The classic beauty and style of the DVBH Direct Vent Fireplace - 36" is outdone only by its radiant warmth. This fireplace has superior efficiency with an AFUE (Annual Fuel Utilization Efficiency) rating of up to 71%.

Features:

• Heat output: 26,000 BTUs
• Heating capacity: 1200 sq. ft.
• CSA design certified
• Signature Command electronic ignition

Standard ceramic glass ensures not only a clear view of the dancing flames, but also even, radiant heat that will keep your home cozy. With a wide variety of options, this fireplace offers flexibility and a custom look that will suit any décor.

The Signature Command System is an electronic ignition with an automatic battery backup system. This system has a hi/lo, three step flame adjustment. The system comes standard with 15' of wire and an on/off wall switch.

Dimensions:

• 37.0625" W x 41.5" H x 18.25" D (actual)
• 37.5" W x 41.625" H x 16.5" D (framing)
• 32" W x 20.375" H (viewing area)

The classic beauty and style of the DVBH Direct Vent Fireplace - 33" is outdone only by its radiant warmth. This fireplace has superior efficiency with an AFUE (Annual Fuel Utilization Efficiency) rating of up to 71%.

Features:

• Heat output: 23,000 BTUs
• Heating capacity: 1000 sq.ft.. with NG/1100 sq.ft.. with LP
• CSA design certified
• Signature Command electronic ignition

Standard ceramic glass ensures not only a clear view of the dancing flames, but also even, radiant heat that will keep your home cozy. With a wide variety of options, this fireplace offers flexibility and a custom look that will suit any décor.

The Signature Command System is an electronic ignition with an automatic battery backup system. This system has a hi/lo, three step flame adjustment. The system comes standard with 15' of wire and an on/off wall switch.

Dimensions:

• 33.0625" W x 37.875" H x 15" D (actual)
• 33.5" W x 38" H x 13.75" D (framing)
• 29.875" W x 18" H (viewing area)

Create a dramatic, modern focal point with the DVBL Contemporary Solitaire Direct Vent Fireplace - 42"! With a reflective black porcelain liner you can add glass or glass with stones to create a unique burning display. The clean-face design with no louvers provides an expansive viewing area.

Features:

• Heat output: 28,000 BTUs
• Heating capacity: 1150 sq.ft.. with NG/1175 sq.ft.. with LP
• Signature Command electronic ignition
• CSA design certified

This fireplace is an energy efficient choice as well as a beautiful one. With a natural flame burner system the aluminized pan produces realistic, randomly dancing flames. The large ember bed and glowing ceramic fiber logs add to the overall fire viewing experience.

The Signature Command System is an electronic ignition with an automatic battery backup system. This system has a hi/lo, three step flame adjustment. The system comes standard with 15' of wire and an on/off wall switch.

Dimensions:

• 41.0625" W x 41.75" H x 17.5625" D (actual)
• 17.0625" W x 41.75" H x 17.0625" D (framing)
• 33" W x 25.8125" H (viewing area)

Create a dramatic, modern focal point with the DVBL Contemporary Solitaire Direct Vent Fireplace - 36"! With a reflective black porcelain liner you can add glass or glass with stones to create a unique burning display. The clean-face design with no louvers provides an expansive viewing area.

Features:

• Heat output: 26,000 BTUs
• Heating capacity: 1150 sq. ft.
• Signature Command electronic ignition
• CSA design certified

This fireplace is an energy efficient choice as well as a beautiful one. With a natural flame burner system the aluminized pan produces realistic, randomly dancing flames. The large ember bed and glowing ceramic fiber logs add to the overall fire viewing experience.

The Signature Command System is an electronic ignition with an automatic battery backup system. This system has a hi/lo, three step flame adjustment. The system comes standard with 15' of wire and an on/off wall switch.

Dimensions:

• 37.0625" W x 41.75" H x 17.0625" D (actual)
• 37.4375" W x 41.75" H x 17.0625" D (framing)
• 29" W x 25.8125" H (viewing area)