Fireplace Cerification - UL Listed

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry Vent Free Firebox Kit. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Rated for 99.9% heating efficiency
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL listing standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for vent-free application, this firebox kit utilizes no vent, chimney, or flue, keeping all generated heat directly inside your home, and making for 99.9% energy efficiency. When installed in compliance with manufacturer instructions, all vent-free combustion by-products are safe to breathe. This unit arrives with a fuel line knock-out that can be placed on either side of the firebox—no on-sight drilling is required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry Vent Free Firebox Kit. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Rated for 99.9% heating efficiency
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL listing standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for vent-free application, this firebox kit utilizes no vent, chimney, or flue, keeping all generated heat directly inside your home, and making for 99.9% energy efficiency. When installed in compliance with manufacturer instructions, all vent-free combustion by-products are safe to breathe. This unit arrives with a fuel line knock-out that can be placed on either side of the firebox—no on-sight drilling is required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry Vent Free Firebox Kit. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Rated for 99.9% heating efficiency
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL listing standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for vent-free application, this firebox kit utilizes no vent, chimney, or flue, keeping all generated heat directly inside your home, and making for 99.9% energy efficiency. When installed in compliance with manufacturer instructions, all vent-free combustion by-products are safe to breathe. This unit arrives with a fuel line knock-out that can be placed on either side of the firebox—no on-sight drilling is required. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 39" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 24" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 24” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 44" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 24" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 24” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 49" Pre-cast Masonry B-Vent Gas Firebox Kit w/ 30" Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 30” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Bring the look of a masonry fireplace home with the 43" Pre-cast Masonry See-Thru B-Vent Firebox Kit w/ Gas Logs. Pre-cast from modular concrete at half the cost, this firebox is not only lighter than the leading competition, but up to 70% tougher as well, showcasing a refractory strength of 3500 PSI.

Features:

• Approved for multi-story combustible wood floor installation
• Includes 30” gas logs
• Ready to burn natural gas or propane systems
• Proudly made in the United States
• Complies with UL 127 & UL 103 chimney component standards

Upgrading your hearth from a basic metal firebox to an artistic stonework creation, this unit comes ready for assembly—and because it weighs less than normal masonry fireplaces, it can be installed on any floor of the house without the need for extraneous reinforcement. The base is pre-drilled to make rebar installation easy, and the included 50 lb. bucket of dry mortar provides everything you need to complete the project. With proper care, the entire firebox can be completed in less than two hours, rather than a traditional installation that can last up to three weeks.

Configured for natural draft application, this unit draws combustion air from the inside of your home, then exhausting byproducts through a roof vent or chimney. Once installed, the solid glass front of the firebox will not be able to open. This firebox arrives with a fuel line knock-out that can be placed on either side of the firebox and a set of 30” gas logs—no on-sight drilling is required. These logs are custom made for this firebox and are constructed of refractory ceramics with steel rod reinforcements. These logs will radiate heat while in operation and after the burner has been turned off. For all specific measurements and included pieces, please refer to the attached PDF charts.

Please note that a metal base is required in order to burn a masonry fireplace on wood flooring. All pieces and components are proudly manufactured and distributed in the United States of America, complying with UL 127 and UL 103 chimney standards. This firebox is ICC-ES listed.

Custom sizes available from our NFI certified sales team at: (877)919-1904

Give your hearth the clean finish it deserves with the 48" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

12 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 42" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 30" Engineered B-Vent Masonry Fireplace System. This fireplace combines a masonry fireplace with a b-vent system that is designed for burning gas logs. The interlocking modular concrete pieces join together to create a masonry firebox that is stronger, lighter, and 50% cheaper than a customary stonework installation.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• UL Standard 127 compliant
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

Give your hearth the clean finish it deserves with the 48" Engineered Vent-free Masonry Fireplace System. Designed for burning ventless gas logs, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

12 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 42" Engineered Vent-free Masonry Fireplace System. Designed for burning ventless gas logs, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 36" Engineered Vent-free Masonry Fireplace System. Designed for burning ventless gas logs, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 30" Engineered Vent-free Masonry Fireplace System. Designed for burning ventless gas logs, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Angled fireplace backing provides better heat reflection
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. From foundation to framing, this unit has been designed for efficiency with an angled backing for better heat reflection. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

5 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 48" Engineered Ventless See-Thru Masonry Fireplace System. Bringing warmth and light to both sides of the ventless firebox, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Two-sided firebox with a single flue
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

12 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 42" Engineered Ventless See-Thru Masonry Fireplace System. Bringing warmth and light to both sides of the ventless firebox, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Two-sided firebox with a single flue
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

10 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 36" Engineered Ventless See-Thru Masonry Fireplace System. Bringing warmth and light to both sides of the ventless firebox, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Two-sided firebox with a single flue
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

6 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Give your hearth the clean finish it deserves with the 30" Engineered Ventless See-Thru Masonry Fireplace System. Bringing warmth and light to both sides of the ventless firebox, this interlocking modular concrete unit is rated for 99.9% heat efficiency and installation on combustible flooring.

Features:

• Two-sided firebox with a single flue
• Withstands more than 3,000 PSI
• 100 year life expectancy
• 99.9% heat efficiency
• Approved for installation on combustible wood flooring

This kit brings the stonework tradition to new heights of durability, now able to withstand more than 3,000 lbs. per square inch. In addition, an easy one-piece masonry flue system keeps construction easy—simply stack one block on top of another, then mortar them together. The entire firebox can be completed in a matter of hours, as opposed to a 2-3 week project that will incur hefty installation costs. Several reports have been issued to prove the durability of this unit, including an ICC-ES Report and a Los Angeles Research Report. Finally, by adhering to Underwriters Laboratories Standard 127 and backing up the product with a 20 year warranty, we go the extra mile to guarantee your fireplace for a 100 year life expectancy.

5 bags of FireRock Mortar are needed for proper installation. For every six blocks of chimney, an extra bag of mortar is required. Up to 60' of chimney can be supported with this fireplace kit.

Sculpted from clean lines and smooth surfaces, the Al Fresco Outdoor Wood Burning Fireplace - 42" showcases a stainless steel construction and an expansive viewing area. By use of a radiant heating style, this unit produces consistently high temperatures night after night.

Features:

• All stainless steel construction
• Gas line knockout for NG or LP conversion
• UL listed premium excellence
• Basket grate, flue damper, and firescreen included
• Concrete refractory lining reflects superior heat

Warming up your outdoor room and lighting up the night, this Al Fresco Outdoor Wood Burning Fireplace - 42" combines a modern medium with a classic ideal. The unit comes complete with a refractory brick lining, which not only efficiently reflects heat, but also works as an easy to clean surface. Its firebox is easily adaptable for natural gas or liquid propane fuel types.

Dimensions:

• 46" W x 43.25" H x 22" D (actual)
• 47" W x 43.75" H x 22.5" D (framing)
• 36.75" W x 15.5" H x 22.875" D (hearth)
• 42" W x 22.75"H (viewing area)

Sculpted from clean lines and smooth surfaces, the Al Fresco Outdoor Wood Burning Fireplace - 36" showcases a stainless steel construction and an expansive viewing area. By use of a radiant heating style, this unit produces consistently high temperatures night after night.

Features:

• All stainless steel construction
• Gas line knockout for NG or LP conversion
• UL listed premium excellence
• Basket grate, flue damper, and firescreen included
• Concrete refractory lining reflects superior heat

Warming up your outdoor room and lighting up the night, this Al Fresco Outdoor Wood Burning Fireplace - 36" combines a modern medium with a classic ideal. The unit comes complete with a refractory brick lining, which not only efficiently reflects heat, but also works as an easy to clean surface. Its firebox is easily adaptable for natural gas or liquid propane fuel types.

Dimensions:

• 40" W x 43.25" H x 22" D (actual)
• 41" W x 43.75" H x 22.5" D (framing)
• 31.125" W x 15.5" H x 19.875" D (hearth)
• 36" W x 22.75"H (viewing area)

Add a little magic to your home with the WMC Royal WarmMajic Wood Burning Fireplace - 42"'. This fireplace is sure to keep you and your family warm on cool winter nights.

Features:

• 160 CFM forced air blower
• Tapered design for reflection of heat
• Refractory lined for each clean up
• Fully insulated for performance/efficiency

The WMC Royal WarmMajic Wood Burning Fireplace - 42"' was built for heating efficiency, with a 160 CFM forced air system with an adjustable speed control there is a constant flow of warm air into the room. The tapered design of the firebox assure a greater reflection of radiant heat into the room and the fully insulated construction helps to reduce outside cold infiltration.

This fireplace features a dual chambered, heat circulating design which takes in cool room air through the lower grille, heats it as it passes around the bottom, back and sides of the hot firebox surface, and then returns that hot air out the top grille and into the room. The WarmMajic takes the natural beauty of a wood burning fire to a new level.

Dimensions:

• 46" W x 36.625" H x 22" D (actual)
• 47" W x 40.75" H x 22.5" D (framing)
• 42" W x 21" H (fireplace opening)
• 39.625" front width x 23.25" rear width x 15.25" depth (hearth dimensions)

Add a little magic to your home with the WMC Royal WarmMajic Wood Burning Fireplace - 36". This fireplace is sure to keep you and your family warm on cool winter nights.

Features:

• 160 CFM forced air blower
• Tapered design for reflection of heat
• Refractory lined for each clean up
• Fully insulated for performance/efficiency

The WMC Royal WarmMajic Wood Burning Fireplace - 36" was built for heating efficiency, with a 160 CFM forced air system with an adjustable speed control there is a constant flow of warm air into the room. The tapered design of the firebox assure a greater reflection of radiant heat into the room and the fully insulated construction helps to reduce outside cold infiltration.

This fireplace features a dual chambered, heat circulating design which takes in cool room air through the lower grille, heats it as it passes around the bottom, back and sides of the hot firebox surface, and then returns that hot air out the top grille and into the room. The WarmMajic takes the natural beauty of a wood burning fire to a new level.

Dimensions:

• 40" W x 36.625" H x 22" D (actual)
• 41" W x 40.75" H x 22.5" D (framing)
• 36" W x 21" H (fireplace opening)
• 33.5" front width x 20.25" rear width x 20.25" depth (hearth dimensions)

The Designer See-Thru Wood Burner Fireplace - 36" is a wood burning fireplace like none other - this designer fireplace is a see-thru design that is wood burning! Elegantly styled this fireplace offers an expansive view and exciting design applications.

Features:

• Heavy-duty grate
• Log-lighter access
• Can be converted to gas
• UL & ULC design certified

See-Through Designer wood burning fireplaces offers an expansive viewing area with no smoke baffles for a clean, sophisticated look that really showcases the natural beauty of a wood fire. With its heavy duty grate, log-lighter access and standard refractory lined firebox, this fireplace provides double the viewing pleasure!

Dimensions:

• 40" W x 36" H x 24" D (actual)
• 40.5" W x 52.75" H x 23" D (framing)
• 36" W x 21" H (fireplace opening)
• 29" front width x 21" rear width x 17.125" depth (hearth dimensions)

The Sovereign Heat Circulating Wood Burning Fireplace - 42" adds the warmth of circulating heat and an unobstructed view of the fire to any room in your home. The Sovereign is a classic-looking wood burning fireplace will add elegance and tradition to any room.

Features:

• Refractory-lined firebox
• Black mesh fire screen
• Cast iron flue
• Heavy-duty grate

With a full refractory firebox it is durable and offers a realistic look along with being easy to clean. The tapered design of the firebox creates better heat reflection ensuring that more heat is reflected outward so it can warm the room rather than escaping out the chimney. If you ever to convert the wood burning fireplace to gas there are two knockouts on either side of the firebox, you can easily add an optional gas log set to your wood-burning fireplace. The lift up grate makes ash removal simple, while the built-in ash lip keeps soot and cinders from spilling out of the fireplace. The louvers at the top and bottom help to circulate the heat and the heat is transferred as it moves across hot surfaces.

Dimensions:

• 46" W x 39.625" H x 22" D (actual)
• 47" w x 43.75" H x 22.5" D (framing)
• 42" W x 24" H (fireplace opening)
• 36.75" front width x 22.875" rear width x 15.5" D (hearth dimensions)

The Sovereign Heat Circulating Wood Burning Fireplace - 36" adds the warmth of circulating heat and an unobstructed view of the fire to any room in your home. The Sovereign is a classic-looking wood burning fireplace will add elegance and tradition to any room.

Features:

• Refractory-lined firebox
• Black mesh fire screen
• Cast iron flue
• Heavy-duty grate

With a full refractory firebox it is durable and offers a realistic look along with being easy to clean. The tapered design of the firebox creates better heat reflection ensuring that more heat is reflected outward so it can warm the room rather than escaping out the chimney. If you ever to convert the wood burning fireplace to gas there are two knockouts on either side of the firebox, you can easily add an optional gas log set to your wood-burning fireplace. The lift up grate makes ash removal simple, while the built-in ash lip keeps soot and cinders from spilling out of the fireplace. The louvers at the top and bottom help to circulate the heat and the heat is transferred as it moves across hot surfaces.

Dimensions:

• 40" W x 39.625" H x 22" D (actual)
• 41" w x 43.75" H x 22.5" D (framing)
• 36" W x 24" H (fireplace opening)
• 31.125" front width x 19.875" rear width x 15.5" D (hearth dimensions)

The Sovereign Radiant Wood Burning Fireplace - 42" adds the warmth of radiant heat and an unobstructed view of the fire to any room in your home. The Sovereign is a classic-looking wood burning fireplace will add elegance and tradition to any room.

Features:

• Refractory-lined firebox
• Black mesh fire screen
• Cast iron flue
• Heavy-duty grate

With a full refractory firebox it is durable and offers a realistic look along with being easy to clean. The tapered design of the firebox creates better heat reflection ensuring that more heat is reflected outward so it can warm the room rather than escaping out the chimney. If you ever to convert the wood burning fireplace to gas there are two knockouts on either side of the firebox, you can easily add an optional gas log set to your wood-burning fireplace. The lift up grate makes ash removal simple, while the built-in ash lip keeps soot and cinders from spilling out of the fireplace.

Dimensions:

• 46" W x 39.625" H x 22" D (actual)
• 47" w x 43.75" H x 22.5" D (framing)
• 42" W x 24" H (fireplace opening)
• 36.75" front width x 22.875" rear width x 15.5" D (hearth dimensions)

The Sovereign Radiant Wood Burning Fireplace - 36" adds the warmth of radiant heat and an unobstructed view of the fire to any room in your home. The Sovereign is a classic-looking wood burning fireplace will add elegance and tradition to any room.

Features:

• Refractory-lined firebox
• Black mesh fire screen
• Cast iron flue
• Heavy-duty grate

With a full refractory firebox it is durable and offers a realistic look along with being easy to clean. The tapered design of the firebox creates better heat reflection ensuring that more heat is reflected outward so it can warm the room rather than escaping out the chimney. If you ever to convert the wood burning fireplace to gas there are two knockouts on either side of the firebox, you can easily add an optional gas log set to your wood-burning fireplace. The lift up grate makes ash removal simple, while the built-in ash lip keeps soot and cinders from spilling out of the fireplace.

Dimensions:

• 40" W x 39.625" H x 22" D (actual)
• 41" w x 43.75" H x 22.5" D (framing)
• 36" W x 24" H (fireplace opening)
• 31.125" front width x 19.875" rear width x 15.5" D (hearth dimensions)

The Royalton Heat Circulating Wood Burning Fireplace - 42" will give people a place to gather – making the fire the focal point of your room. The authentic style of a natural wood burning fireplace will set a mood and provide generous amounts of radiant heat with no smoke baffles to obstruct your view of the fire.

Features:

• Refractory liner with brick pattern
• Tapered firebox for radiant heat reflection
• Black mesh fire screen with black pulls
• Built-in ash lip

Enjoy the warmth, comfort, and elegance of a royal wood fire. This fireplace offers top-of-the-line features and aesthetics, all in an economical and easy-to-install package. With a built-in cast iron flue damper, heat loss will be reduced when the fireplace is not in use. A wood basket grate is included, it is constructed of durable 1/2” steel. If you ever want to convert the wood burning fireplace to gas there are two easy knockouts to access a gas line.

This fireplace will be a great addition to your home. The louvers at the top and bottom help to circulate the heat and the heat is transferred as it moves across hot surfaces. The refractory brick lining the makes the firebox is easy to clean, and its brick pattern brings a classic style to your hearth. The built-in ash lip creates an Ash Management System - the heavy duty lift-up grate makes ash removal simple, while the built-in ash lip keeps soot and cinders from spilling out of the fireplace.

Dimensions:

• 46" W x 36.625" H x 20" D (actual)
• 47" W x 40.75" H x 21.5" D (framing)
• 42" W x 21" H (fireplace opening)
• 39.25" front width x 25.625" rear width x 15.25" depth (hearth dimensions)

The Royalton Heat Circulating Wood Burning Fireplace - 36" will give people a place to gather – making the fire the focal point of your room. The authentic style of a natural wood burning fireplace will set a mood and provide generous amounts of radiant heat with no smoke baffles to obstruct your view of the fire.

Features:

• Refractory liner with brick pattern
• Tapered firebox for radiant heat reflection
• Black mesh fire screen with black pulls
• Built-in ash lip

Enjoy the warmth, comfort, and elegance of a royal wood fire. This fireplace offers top-of-the-line features and aesthetics, all in an economical and easy-to-install package. With a built-in cast iron flue damper, heat loss will be reduced when the fireplace is not in use. A wood basket grate is included, it is constructed of durable 1/2” steel. If you ever want to convert the wood burning fireplace to gas there are two easy knockouts to access a gas line.

This fireplace will be a great addition to your home. The louvers at the top and bottom help to circulate the heat and the heat is transferred as it moves across hot surfaces. The refractory brick lining the makes the firebox is easy to clean, and its brick pattern brings a classic style to your hearth. The built-in ash lip creates an Ash Management System - the heavy duty lift-up grate makes ash removal simple, while the built-in ash lip keeps soot and cinders from spilling out of the fireplace.

Dimensions:

• 40" W x 36.625" H x 20" D (actual)
• 41" W x 40.75" H x 21.5" D (framing)
• 36" W x 21" H (fireplace opening)
• 33.25" front width x 19.625" rear width x 15.25" depth (hearth dimensions)

The Royalton Radiant Wood Burning Fireplace - 42" will give people a place to gather – making the fire the focal point of your room. The authentic style of a natural wood burning fireplace will set a mood and provide generous amounts of radiant heat with no smoke baffles to obstruct your view of the fire.

Features:

• Refractory liner with brick pattern
• Tapered firebox for radiant heat reflection
• Black mesh fire screen with black pulls
• Built-in ash lip

Enjoy the warmth, comfort, and elegance of a royal wood fire. This fireplace offers top-of-the-line features and aesthetics, all in an economical and easy-to-install package. With a built-in cast iron flue damper, heat loss will be reduced when the fireplace is not in use. A wood basket grate is included, it is constructed of durable 1/2” steel. If you ever want to convert the wood burning fireplace to gas there are two easy knockouts to access a gas line.

This fireplace will be a great addition to your home. The refractory brick lining the makes the firebox is easy to clean, and its brick pattern brings a classic style to your hearth. The built-in ash lip creates an Ash Management System - the heavy duty lift-up grate makes ash removal simple, while the built-in ash lip keeps soot and cinders from spilling out of the fireplace.

Dimensions:

• 46" W x 36.625" H x 20" D (actual)
• 47" W x 40.75" H x 21.5" D (framing)
• 42" W x 21" H (fireplace opening)
• 39.25" front width x 25.625" rear width x 15.25" depth (hearth dimensions)

The Royalton Radiant Wood Burning Fireplace - 36" will give people a place to gather – making the fire the focal point of your room. The authentic style of a natural wood burning fireplace will set a mood and provide generous amounts of radiant heat with no smoke baffles to obstruct your view of the fire.

Features:

• Refractory liner with brick pattern
• Tapered firebox for radiant heat reflection
• Black mesh fire screen with black pulls
• Built-in ash lip

Enjoy the warmth, comfort, and elegance of a royal wood fire. This fireplace offers top-of-the-line features and aesthetics, all in an economical and easy-to-install package. With a built-in cast iron flue damper, heat loss will be reduced when the fireplace is not in use. A wood basket grate is included, it is constructed of durable 1/2” steel. If you ever want to convert the wood burning fireplace to gas there are two easy knockouts to access a gas line.

This fireplace will be a great addition to your home. The refractory brick lining the makes the firebox is easy to clean, and its brick pattern brings a classic style to your hearth. The built-in ash lip creates an Ash Management System - the heavy duty lift-up grate makes ash removal simple, while the built-in ash lip keeps soot and cinders from spilling out of the fireplace.

Dimensions:

• 40" W x 36.625" H x 20" D (actual)
• 40.5" W x 40.75" H x 21.5" D (framing)
• 36" W x 21" H (fireplace opening)
• 33.25" front width x 19.625" rear width x 15.25" depth (hearth dimensions)

The Osburn Stratford Zero-Clearance Wood Stove Fireplace is what you've been hoping to find, a decorative and efficient wood fireplace that meets EPA particle emissions standards. With a 2.5 cubic foot firebox that's easy to reach through double-cast iron doors. This fireplace can accept logs up to 20" in length.

The Osburn Stratford Zero-Clearance Wood Stove Fireplace will impress you with its distinctive style and exceptional heating capacity of 2100 square feet! There are several options for you to design your zero-clearance wood stove to meet your needs and match your decor.

The use of this fireplace has been approved on Selkirk, Dura-Vent, Security Chimneys, American Metal and ICC.

Gel fuel fireplaces are a fantastic alternative to wood burning or even gas fireplaces. Since the gel fuel burns cleaner than even a candle, there’s no need for a chimney; what’s more, there’s no smoke, no soot, no odor, and no harmful fumes. All that’s left is a satisfied homeowner. Is it really that simple? Sure! By burning one to three cans of gel fuel (sold separately) at a time, you can adjust the size of your fire and enjoy a realistic-sounding crackle reminiscent of real burning wood. All you’ll need to get started is a long lighter or match! And while gel fuel fireplaces are primarily decorative, the burning gel fuel produces a modest 3000 BTU’s per hour, adding cozy warmth to an average room. Choose from an extensive line of quality fireplaces with a range of decorative styles – you’re sure to find the perfect one for you!

The Ashley is one of those pieces that seems to match anything, no matter what your décor. That’s probably why it’s such a customer favorite! Fluted columns are topped with double corbels that frame a bordered center panel and that support a generous mantel. The traditional design of the fireplace allows the firelight to really take center stage, reflecting off the trendy blackwash finish. When you light up to three cans of gel fuel behind the realistic concrete log set and fireplace screen, you’ll have a crackling, dancing fire in as little as thirty seconds. For a traditional accent with a versatile design, you can’t go wrong with the Ashley. No no [Error processing dynamic tag getCurrentAttribute('item','custitem_standard_brand') : record invtpart 47572 not found] No Real Flame Fireplaces - Gel & Ethanol NoBullets-NoLogo 0 Ashley Black Gel Fuel Fireplace 2 to 3 Business Days

Gel fuel fireplaces are a fantastic alternative to wood burning or even gas fireplaces. Since the gel fuel burns cleaner than even a candle, there’s no need for a chimney; what’s more, there’s no smoke, no soot, no odor, and no harmful fumes. All that’s left is a satisfied homeowner. Is it really that simple? Sure! By burning one to three cans of gel fuel (sold separately) at a time, you can adjust the size of your fire and enjoy a realistic-sounding crackle reminiscent of real burning wood. All you’ll need to get started is a long lighter or match! And while gel fuel fireplaces are primarily decorative, the burning gel fuel produces a modest 3000 BTU’s per hour, adding cozy warmth to an average room. Choose from an extensive line of quality fireplaces with a range of decorative styles – you’re sure to find the perfect one for you!

The Ashley is one of those pieces that seems to match anything, no matter what your décor. That’s probably why it’s such a customer favorite! Fluted columns are topped with double corbels that frame a bordered center panel and that support a generous mantel. The traditional design of the fireplace allows the firelight to really take center stage, reflecting off the clean white finish. When you light up to three cans of gel fuel behind the realistic concrete log set and fireplace screen, you’ll have a crackling, dancing fire in as little as thirty seconds. For a traditional accent with a versatile design, you can’t go wrong with the Ashley. No no [Error processing dynamic tag getCurrentAttribute('item','custitem_standard_brand') : record invtpart 47571 not found] No Real Flame Fireplaces - Gel & Ethanol NoBullets-NoLogo 0 Ashley White Gel Fuel Fireplace 2 to 3 Business Days

Gel fuel fireplaces are a fantastic alternative to wood burning or even gas fireplaces. Since the gel fuel burns cleaner than even a candle, there’s no need for a chimney; what’s more, there’s no smoke, no soot, no odor, and no harmful fumes. All that’s left is a satisfied homeowner. Is it really that simple? Sure! By burning one to three cans of gel fuel (sold separately) at a time, you can adjust the size of your fire and enjoy a realistic-sounding crackle reminiscent of real burning wood. All you’ll need to get started is a long lighter or match! And while gel fuel fireplaces are primarily decorative, the burning gel fuel produces a modest 3000 BTU’s per hour, adding cozy warmth to an average room. Choose from an extensive line of quality fireplaces with a range of decorative styles – you’re sure to find the perfect one for you!

The Ashley is one of those pieces that seems to match anything, no matter what your décor. That’s probably why it’s such a customer favorite! Fluted columns are topped with double corbels that frame a bordered center panel and that support a generous mantel. The traditional design of the fireplace allows the firelight to really take center stage, reflecting off the rich mahogany finish. When you light up to three cans of gel fuel behind the realistic concrete log set and fireplace screen, you’ll have a crackling, dancing fire in as little as thirty seconds. For a traditional accent with a versatile design, you can’t go wrong with the Ashley. No no [Error processing dynamic tag getCurrentAttribute('item','custitem_standard_brand') : record invtpart 47569 not found] No Real Flame Fireplaces - Gel & Ethanol NoBullets-NoLogo 0 Ashley Mahogany Gel Fuel Fireplace 2 to 3 Business Days