Designed for masonry fireplaces, the Cozy Grate Fireplace Heater is the perfect companion for most fireplace glass doors. It reduces your heating costs by distributing more heat throughout the room. Whether you have a fireplace door or not, the Cozy Grate Heater can be installed and will allow you to get the full benefits from your fireplace.

Specifically designed for placement inside your fireplace, the Cozy Grate Heater generates 40,000 BTU's of heat per hour while hidden neatly behind your fireplace doors. The variable two speed blower (100 CFM) is equipped with a thermostat control that turns on automatically at 110F and off at 90F. The 9 foot electrical chord for the motor comes out the front of the unit and is protected by a heat shield. Motors on the left hand side of grate are available to accomodate your electrical outlet location. Note: If attempting to use the Cozy Grate with a gas starter pipe, please call our technical sales staff for instructions.

Free Installation Video Included with Purchase!

The Spitfire Fireplace Heater was developed to dramatically increase the convection heat (hot air) coming from your fireplace. The unique design super heats the air within the exchanger tubes allowing you to realize your fireplace's full potential. The heavy duty steel tubes serve as your fireplace grate; you simply build your fire directly on the steel tubes.

• Simple Installation - can be used for Wood Burning of Gas Log fireplaces
• Delivers up to 45,000 BTU’S (6 tube unit)
• Blower rated at 160 Cubic Feet per Minute
• Air Temp is 400 degrees = 400% heat increase from your fireplace
• Reduce home heating cost by up to 50%
• 40 Decibel 2 Speed motor - QUIET!
• 2 Speed Blower motor sits outside of the fireplace on your hearth.
• Blower motor can mount on right or left side by simply attaching blower to opposite side
• Flexible blower motor connector adjusts from 8" - 14", and can be extended by adding another section.
• Aluminized Steel Tubing - .063 gauge – inhibits rust through & burn through
• 3 year limited warranty
• 1 ¾” wide tubes
• Can be used during power outages - remove blower manifold and air flows through naturally.
• 1 1/2" leg clearance allows unit to be used with gas fireplaces - if custom leg height is needed - please call

The Fireplace Radiator is a heavy duty cast iron unit, built for durability and reliability. The blower motor sits outside the firebox and draws cool air from the room into the heat chamber. The heat chamber, which is constructed with heavy duty cast iron, superheats the air which is then pushed back into the home with the assistance of the blower. This blower moves the hot air back into the home at up to 180 cubic feet per minute!

Product Features:

• Up to 45,000 BTU's of heat output Can be used in combination with Fireplace Glass Doors
• UL listed Variable Speed Blower up to 180 Cubic Feet per Minute.
• Moves more air than any other grate heater blower. 6' Power cord plugs into normal home receptacle.
• Designed with 60 lbs of Heavy Duty Cast Iron The heat chamber doubles as Fireback radiating heat back into your home.
• Easy assembly and operation.
• 5 Year Warranty on cast iron and sheet metal parts. 1 Year Warranty on electrical components.

Minimum Requirements:

• Fireplace width from 19" to 51" and depth of 16 1/2" or more.
• The unit can be used for fireplaces that are more shallow than 16" with minor adjustments
• Available with either a right or left hand motor Front diverter bar can be integrated with fireplace glass doors. The front diverter bar expands from 36" to 52" wide, and will lift your glass door frame approximately 1 1/8" off the ground.

Free Installation Video Included with Purchase!

Designed for gas fireplaces, the Gas Log Heater is the perfect companion for any fireplace enclosure. It reduces your heating costs by distributing more heat throughout the room. Allows you to get the full benefit from your fireplace.
Specifically designed for placement inside your fireplace, the Gas Log Heater generates 25,000 BTU's of heat per hour while hidden neatly behind your fireplace glass enclosure. The variable speed blower (60 CFM) is equipped with a thermostat control that turns on automatically at 110F and off at 90F. Motors on the left hand side of grate are available to accommodate your electrical outlet location.
Product Features:

A unique air-flow design with one floor level outlet provides rapid heat circulation throughout the house

Steel tubing warranted for two years

Designed for masonry fireplaces, not to be used for zero-clearance fireplaces

Rheostat and Thermostat Controlled

Holds 16" to 30" Gas Logs (Most mfgrs)

All Electrical Components are U.L. Approved & Come With a 1 Year Warranty

How To Order:
Measure fireplace width in back and the depth to determine which model best suits your needs. Gas Log Heater dimensions need only be less than fireplace dimensions. All units come with a front grill 1 3/8" high and 29 1/4" to 51 1/4" wide.
Glass door will sit on top of front rail and will be elevated 1 3/8". If your door is an inside fit you must have 1" extra depth to accommodate the depth of the Gas Log Heater.
Dimensions: Choose size below. All units come with a front rail that is 1 3/8" high and can telescope to 51 1/4" wide (minimum distance is 29 1/4") Weight: 28 lbs

Optional Trim Bar for Fireplace with Glass Doors:
• The GL-54 Trim Bar is one piece and 51" long.
• The Trim Bar can easily be cut to fit your existing glass door.
• The Trim Bar comes with end caps for a clean finish after cutting.
• The Trim Bar comes in two finishes that exactly match a number of our glass doors and accommodate most other glass doors
The Left Hand Motor for the Gas Log Heater requires special left hand trim bar

The Emberaire Fireplace Heater is versatile, as it functions efficiently with gas logs or wood. Use it while burning wood by simply laying the titanium alloy exchanger tube on your fireplace grate, in the fire. The tube is designed to withstand intense temperatures and comes with a five year warranty.
When using with a gas fireplace, simply use the tube as a replacement for your back gas log. This heater can be used with most glass doors. The Emberaire Fireplace Heater pulls in the cold air from your room, circulates it through the fireplace where it is heated, and then blows it back into your room. The system is competely enclosed so no smoke from your fireplace will be blown into your room. Make your home more energy efficient by adding the Emberaire heater to your fireplace.

Product Features:

Delivers 28,000 BTU's of heat from the fireplace

May be used with most glass doors

Functions efficiently with gas logs or wood

Fits most fireplaces and is adjustable

Right or left cord exit

Seven foot long electrical chord

Titanium alloy exchanger tube for long life

5 Year Limited Warranty

2 speed motor control

Thermally protected motor housing comes with a one year warranty

Dimensions: Choose size below.
Small - 25"W x 18"D rear width is 23"
Large - 29 1/2"W x 18"D rear width is 28"