Top Sealing Chimney Dampers

The Lock-Top II combines the energy-saving features of the Lock-Top Damper with a special, stainless steel Gelco chimney cap.

This combo unit is a great option for those who want the energy saving benefits of the Lock-Top Damper, but are concerned about snow buildup on top of the damper. This is also an excellent choice for homeowners looking to protect their chimneys from rain and pests.

• The Lock-Top II comes fully assembled for easy installation.
• Its base mounts to the built-in sweeps ring which is attached to the flue tile with silicone sealant
• Comes with 30' stainless steel cable that drops down the flue, and a complete hardware set that mounts inside the firebox. (50' cables are available for taller chimneys)
• The Lock-Top II comes with a Lifetime Warranty.
• The Lock-Top II (except the 17 x 17) is available with a 5/8" screen mesh, which meets California Spark Arrestor Codes
• Note: Top Sealing Dampers are not recommended to be used with gas fireplaces

All fireplace dampers leak energy - even new ones. So if you have a chimney, you need a Lock-Top top sealing damper! The Lock-Top Chimney Damper is like a storm door for your chimney - locking the unconditioned air outside, and keeping the expensive, conditioned air inside. You will be saving energy dollars year-round!

• Constructed with a stainless steel lid attached to a cast aluminum frame by an array of stainless steel springs.
• All Hardware Included including a 30' cable that is dropped down the chimney and operated with a handle mounted in the firebox. Just a tug on the handle will open or tightly close the Lock-Top
• Features a chimney fire safety device that locks the damper open in case of a chimney fire.
• Install the Lock Top Damper along with the EZ Sweeps Ring (not included) and make removing the damper for cleaning your chimney a whole lot easier!
• Now open your chimney damper with even more ease! The EZ Open Damper Handle mounts to the wall of the firebox. A lightweight extension slips over the handle, and the opens the damper with minimal effort.
  
  

  Please Note: Snow and ice can keep the Lock-Top Damper closed in the winter time. If you experience snow and ice during the winter season, consider the Lock Top II Chimney Damper. This Cap and Damper combination is designed specifically for homes in cold climate regions.

  
  

  Please Note: We do not recommend using top-sealing dampers with gas fireplaces.

  No yes No

The Lyemance Energy Saving Damper is proven to reduce air loss through the chimney by as much as 90%. Traditional chimney dampers are known to be inefficient and are costing you hundreds of dollars every year.
The Lyemance Damper mounts easily atop a flue tile with silicone cement which is included. A 32' stainless steel cable, handle and bracket, which are also included, drop down the flue. The bracket is mounted to the inside of the firebox and the handle is locked into place when the damper is to be closed.
The Lyemance damper is designed with a Power Lever which causes a paddle to swing up and lock in place. This unique design gives the unit a "low profile" and allows the damper to be easily closed.
This energy saving product comes with a Lifetime Warranty. The silicon rubber seals ensure your conditioned air won't escape and that the outside air will stay outside. It won't take long for the Lyemance Energy-Saving Damper to pay for itself.

Note: Top Sealing Dampers are not recommended to be used with gas fireplaces.

Now open your damper with even more ease. The EZ Open Damper Handle mounts to the wall of the firebox. A lightweight extension slips over the handle, and the opens the damper with minimal effort.

Please Note: Snow and Ice may keep the Lyemance Damper from working properly in the winter time. No yes No

The Lyemance Energy Saving Damper is proven to reduce air loss through the chimney by as much as 90%. Traditional chimney dampers are known to be inefficient and are costing you hundreds of dollars every year. The Lyemance Chimney Damper mounts easily atop a flue tile with silicone sealant which is included. A 32' stainless steel cable, handle and bracket, which are also included, drop down the flue. The bracket is mounted to the inside of the firebox and the handle is locked into place when the chimney damper is to be closed. The chimney damper is designed with a Power Lever which causes a paddle to swing up and locks in place. This unique design gives the unit a "low profile" and allows the damper to be easily closed.

This energy saving product comes with a Lifetime Warranty. The silicon rubber seals ensure your conditioned air won't escape and that the outside air will stay outside. It won't take long for the Lyemance Energy-Saving Damper to pay for itself.

Note:Top Sealing Chimney Dampers are not recommended to be used with gas fireplaces.

Fits round flue sizes with an inside diameter of: 10 5/8" to 11 3/8"
Cross-Sectional Area: 75 sq. in.

• 6" Adaptor - 8"x8" Lock-Top
• 7" Adaptor - 8"x8" Lock-Top
• 7.5" Adaptor - 8"x8" Lock-Top
• 8" Adaptor - 8"x8" Lock-Top
• 9" Adaptor - 13"x13" Lock-Top
• 10" Adaptor - 13"x13" Lock-Top
• 11" Adaptor - 13"x13" Lock-Top
• 12" Adaptor - 13"x13" Lock-Top

The Seal Tight Chimney Top Damper is a low-profile top mounted damper that serves as a chimney cap! This damper will help prevent heat loss - keep you warm and saving you money. With precision engineering this damper is easy to open and close. It is the perfect upgrade for fireplace chimneys in older houses that never had a damper.

Features:

• Constructed of stainless steel and aluminum - will not rust/corrode
• Includes 30' of cable, fireplace brackets and spring handle
• Mounting adhesive and hardware create an easy install
• Made for open burning masonry fireplace chimneys

This damper attaches to the top of the chimney's flue tile liner, providing a tight, gasketed fit that seals in your heat and seals out weather, insects, birds and animals. When closed the Seal Tight Chimney Top Damper serves as a chimney cap and with a slight pull of the chain it releases the spring-loaded top into the open position when you're ready to enjoy a nice fire.

Sealtight Dampers are precisely hinged for easy finger touch control! It is poured in high temp liquid gaskets and solid silicone rubber gasket on the reverse side. These gaskets are not exposed to outside elements.

Please note: This damper is not to be used with gas burning equipment (ie gas logs).

The Energy Chimney Top Damper is a low-profile top mounted damper that serves as a chimney cap! This damper will help prevent heat loss - keep you warm and saving you money. With precision engineering this damper is easy to open and close. It is the perfect upgrade for fireplace chimneys in older houses that never had a damper.

Features:

• Constructed of stainless steel and aluminum - will no rust/corrode
• Includes 30' of cable, fireplace brackets and spring handle
• Mounting adhesive and hardware create an easy install
• Made for open burning masonry fireplace chimneys

This damper attaches to the top of the chimney's flue tile liner, providing a tight, gasketed fit that seals in your heat and seals out weather, insects, birds and animals. When closed the Energy Chimney Top Damper serves as a chimney cap and with a slight pull of the chain it releases the spring-loaded top into the open position when you're ready to enjoy a nice fire.

The Energy Plus Chimney Top Damper has the tightest seal of any damper in the industry. Constructed of stainless and aluminum it will not rust or corrode. The tight seal on this damper will help prevent heat loss - keep you warm and saving you money.

Features:

• Constructed of stainless steel and aluminum - will not rust/corrode
• Includes 30' of cable, fireplace brackets and spring handle
• Mounting adhesive and hardware create an easy install
• Made for open burning masonry fireplace chimneys

It is easy to install, adhering to the flue with adhesive, included. The lid lifts higher for better air flow with the damper is open during a fire.

The Chimney Cap For Lyemance Damper is the perfect cap to fit over your chimney with a damper that is already installed.

The cast aluminum damper has 3/4" aluminum mesh and is available in three sizes. It will easily mount atop a flue tile and seals tight with silicone rubber.

*Lyemance Damper - Sold Separately