Designed for gas fireplaces, the Gas Log Heater is the perfect companion for any fireplace enclosure. It reduces your heating costs by distributing more heat throughout the room. Allows you to get the full benefit from your fireplace.
Specifically designed for placement inside your fireplace, the Gas Log Heater generates 25,000 BTU's of heat per hour while hidden neatly behind your fireplace glass enclosure. The variable speed blower (60 CFM) is equipped with a thermostat control that turns on automatically at 110F and off at 90F. Motors on the left hand side of grate are available to accomodate your electrical outlet location.

How To Order:
Measure fireplace width in back and the depth to determine which model best suits your needs. Gas Log Heater dimensions need only be less than fireplace dimensions. All units come with a front grill 1 3/8" high and 29 1/4" to 51 1/4" wide.
Glass door will sit on top of front rail and will be elevated 1 3/8". If your door is an inside fit you must have 1" extra depth to accomodate the depth of the Gas Log Heater.

Product Features:
• A unique air-flow design with one floor level outlet provides rapid heat circulation thorughout the house
• Steel tubing warranted for two years
• Designed for masonry fireplaces, not to be used for zero-clearance fireplaces
• Rheostat and Thermostat Controlled
• Holds 16" to 30" Gas Logs (Most mfgrs)
• All Electrical Components are U.L. Approved & Come With a 1 Year Warranty
• All units come with a front rail that is 1 3/8" high and can telescope to 51 1/4" wide (minimum distance is 29 1/4")
• Weight: 28 lbs

Optional Trim Bar for Fireplace with Glass Doors:
• The GL-54 Trim Bar is one piece and 51" long.
• The Trim Bar can easily be cut to fit your existing glass door.
• The Trim Bar comes with end caps for a clean finish after cutting.
• The Trim Bar comes in two finishes that exactly match a number of our glass doors and accomodate most other glass doors
The Left Hand Motor for the Gas Log Heater requires special left hand trim bar