Fireplace Grate Buying Guide
Fireplace grates give you a more efficient fire, allowing air to flow freely inside your fireplace. The
more air present, the hotter your fire will burn. With a durable grate, your logs will be securely held
above the falling ashes, keeping your fire burning efficiently.
1 | The Types
Last Grate You’ll
Heavy duty construction available in a range of depths and sizes, as well as customizable options. A lifetime
warranty guarantees you’ll never need to purchase another grate.
Longest, Hottest Burn
Designed with steel mesh that holds embers directly under the logs and causes only the ashes to fall below.
This leaves less ash build up and a more efficient fire.
Fits A Gas
Intended for fireplaces with gas starters that require a greater clearance from the floor to the bottom of
the grate. The extra height also allows for more airflow beneath the logs.
Any Shape or
Size You Want
Gives you the opportunity to choose the exact depth, width and height needed to fit your fireplace. This
grate will be designed to fit as a perfect match.
Compact for a
Made to accommodate a zero-clearance fireplace, this grate is smaller in size and shallower for a perfect fit
in your smaller fireplace.
Less Work, More Fire
Constructed with a sloped shape, gravity forces logs to fall into the center of the grate causing a longer,
more consistent burn. This eliminates putting wood on the fire yourself as the top logs will fall to the
embers as the fire burns down.
For a See-Through Fireplace
With identical front and rear widths, this grate is designed for a see-through fireplace.
2 | The Materials
Cast from a mold to create a single piece construction, the affordable material is designed to hold in heat.
With smaller slots, hot embers are kept in the bed of the grate for a longer burn.
Heavy duty and durable, steel bar grates are constructed with flat or diamond shaped tines ranging from 1/2”
to 1-1/8” thick.
Able to withstand the elements, this material is made for use in your outdoor fireplace or outdoor fire pit.
Made of a non-corrosive material, it will not rust through over time.
3 | Measuring
A Measure the front width of the fireplace
B Measure the rear width of the fireplace
C Measure the depth from the front to back of the
D If installed, measure the height of the installed gas
Once you have measured your fireplace, subtract 6" from the front width, rear width and depth. The dimensions
you now have is your maximum grate size.
4 | Sizing
It is recommended to have 3" of clearance on all sides of the grate. This ensures optimum performance and
Gas Starter Pipe
If a gas starter pipe is installed in your fireplace, your fireplace grate must be tall enough to allow the
gas starter pipe to fit below the grate.