your order will ship and should arrive within 5-7 business days,
depending on your location.
Your order comes with free lift gate service. The freight driver
will use a lift gate to unload the shipment and place it curbside at
your home. You’ll need to move the shipment from the curb to the end
location. Please make sure your street can accommodate a
INSPECT & SIGN
Upon delivery, you’ll be asked to sign the Proof of Delivery (POD).
Before signing, inspect the shipment for visible damage. If damaged,
refuse the shipment and call us for a replacement. Damage to
products inside the shipment must be reported within 3 business days
The Easy Flex 316Ti liners are recommended when venting wood, pellet, oil, or gas burning appliances.
The EasyFlex 316Ti Chimney Liner Kit - 7" is backed by our Lifetime warranty. Follow the simple maintenance requirements and this chimney liner will be the last one you install. Using our chimney liners will increase the value of your home as the warranty will transfer to the next occupants.
The EasyFlex 316Ti Chimney Liner Kit - 7" comes as a single coil ready to be unwrapped and installed. All our Easy Flex Chimney Liners are made with .005mm Steel. Our world class liner features a Seven-ply seam with ten corrugations between each reinforced seam. It is both air and water tight and others superior flexibility. Experience peace of mind, with the knowledge that your chimney is lined by a fully UL tested and listed liner system. The Easy Flex liner is listed under the UL 1777 standard by the Underwriters Laboratories.
The Easy Flex Liner is a perfect choice for the homeowner’s relining projects. This Liner is light and flexible enough to be installed by one person in many cases. But it is strong enough to be backed by the same Lifetime Warranty as the heavy lining kits. We also back our Lining Systems with a knowledgeable technical sales staff that can assist you in planning your relining project.
This warranty covers 316Ti, 316L, 304L or AL 29-4C Alloy Stainless Steel Relining Pipe for Solid Fuels (Wood, Coal, and Pellets), Oil, and Category I Gas Appliance Applications
Limited Lifetime Coverage
The Manufacturer, Inc. warrants to you (the "purchaser") that for the period set forth below, the Chimney Liner stainless steel relining pipe and components when used as a chimney relining pipe in a masonry chimney, exclusively for residential appliances, shall be free from defects in material or manufacturer's workmanship, and from perforation caused by chimney fire or over firing by you (the purchaser).
The benefits of this warranty shall apply to you (the purchaser) FOREVER with no time limit, provided that you continue to own your own home where the Chimney Liner is installed. In all events, even if you sell your home, The Manufacturer, Inc. will honor the warranty FOREVER with no time limit so that even the new owner will benefit from the installation in your home.
Warranty Conditions and Limitations
The Chimney Liner warranty is subject to the following conditions:
Installation of the pipe and components must be in accordance with the manufacturer's written instructions.
The product must be used only for the lining or relining of chimneys used to vent residential appliances.
Use of this pipe for venting gas appliances is limited to Category I appliances.
The Chimney Liner lining system must be cleaned and inspected on an annual basis by an experienced chimney professional (i.e., at intervals of no more than 18 months each, commencing from the date of purchase), who must fill out and date the appropriate section on this warranty card upon completion of such yearly maintenance. Receipts verifying the annual maintenance was performed must also be retained.
Corrosive chemical chimney cleaners must not be used.
Driftwood, wood or wood pellets containing salt, preservative treated lumber, plastic, experimental fuels, and household trash must not be burned in the appliance.
Plastic bristle flue-cleaning brushes are recommended.
In the case of a chimney fire, the chimney must be inspected and approved by an experienced and qualified chimney professional according to The Manufacturer's maintenance instructions before reuse.
The chimney must have a cap or slate covering installed.
Claim Process and Limitations of Liability
You may make a claim under this warranty or by giving notice to your chimney professional and having your chimney professional provide information about the claim to The Manufacturer. Upon approval of your claim, The Manufacturer shall provide new Chimney Liner pipe and components to you as your exclusive remedy.
The Manufacturer, Inc. does not assume any liability or responsibility for faulty installation of the liner or components, or for defective materials not supplied by The Manufacturer.
Neither The Manufacturer nor the installer of the Chimney Liner lining system shall be liable for any removal or installation charges or for any special, incidental, or consequential damages in any way related to the Chimney Liner pipe.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Some states do not allow the exclusion or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you.