The Easy Flex liner components are recommended when venting wood, pellet, oil, or gas burning appliances.Backed by our Lifetime warranty, simply follow the simple maintenance requirements and this chimney liner will be the last one you install. Using our chimney liners will increase the value of your home as the warranty will transfer to the next occupants.
Easy Flex Chimney Liners are made with .006mm Steel. Our world class liner features a Seven-ply seam with ten corrugations between each reinforced seam. It is both air and water tight and others superior flexibility. Experience peace of mind, with the knowledge that your chimney is lined by a fully UL tested and listed liner system. The Easy Flex liner is listed under the UL 1777 standard by the Underwriters Laboratories.
- 10 inch Diameter
- Quick to connect and disconnect from liner
- The strong eye hook attatched is ready for your rope
Read the Details
Pulling Nose Cone
A well made tool for pulling chimney liners with intruding mortar joints. If you are trying to install a flex liner this tool will make the job quick and easy. If you don't purchase one with your initial order you will be likely to regret it. Edges of the liner just love to get caught on any little edge inside the flue. Do yourself a favor and purchase it with your liner.
Pulling Nose Cone
I have an antique house with a chimney that is 12 x 12 and very crooked. The challenge was to force a 7" liner down to the bsement some 35 feet. We attempted it a week earlier without the pulling cone and was very discouraged. I had Woodland Direct ship the pulling cone on three day delivery. I was absolutely shocked that with three people (two on the roof - one below)we were able to pull the liner through the antique chimney in about 10 seconds. I could not believe it. This is an absolutely essential item to lining a crooked or off centered chimney.
A First-Class Install Tool
This tool is extremely well made, sturdy/strong and quite functional. It made the installation of my pre-insulated chimney liner possible. Being able to pull the liner down while guiding it in from the top was the only was this project could have been completed.
Nose cone puller
The puller worked as advertised. The job would not have gotten done if not for the ability to pull the liner around the offset.