Smoking fireplace ruining your romantic fireside encounters? Stifle the smoke with the Enervex RSHT12 EcoDamper Wood Burning Chimney Fan System. Designed for use with a solid fuel chimney or stack system, this chimney fan creates proper draft to eliminate fireplace smoking. The manual fan speed control allows you to adjust the speed of your fan to ensure you are only using the fan as much as needed, while the included EcoDamper keeps inside air from being drawn up the chimney when the fireplace is not in use.
Constructed of 316 stainless steel and finished with a coat of gray hammerpaint for added corrosion resistance, this chimney fan has been created to stand the test of time. Energy efficient and quiet operation also add to the features of the Enervex RSHT12 EcoDamper Wood Burning Chimney Fan System meaning your electric bill does not have to skyrocket to create a smoke-free fireplace ambiance. Add an Enervex chimney fan to your chimney or stack system today and begin enjoying cool nights spent around the fireplace again.
- Works with solid fuel types up to 1,000 degrees Fahrenheit
- Energy Efficient
- Stainless Steel Construction
Read the Details
- Type: Chimney Fan
- Material: Cast Aluminum | Stainless Steel
- Certification: CSA-CAN3-B255-M81 | UL 378
- Control Type: Manual
- Overall Length: 14 1/4"
- Overall Width: 14 1/4"
- Overall Height: 12 3/4"
- CFM: 550
- RPM: 1600
- Voltage: 120 Volts
- Amp Rating: 1.25A
- Motor Type: Permanent Split Capacitor
- Enclosure: Enclosed
- Attachment Size/Pipe Diameter: 8" | 10" | 12"
- Assembly Required: Required
- Item Weight: 34 lbs.
- Appliance Fuel Type: Wood
- Color: Black
This chimney fan is unbelievable!!! We installed this in our ranch house that has spray in insulation and is a real tight house. We have been told this is cause of our fireplace smoking out the house. This chimney fan sucks up all the smoke while running it on low and I would have bought this years ago if I would have known. Great product and the salesman was a great help buying the right adaptor and fan to fit my chimney.
I bought the RS-12 chimney fan for wood burning fireplaces. I installed it on a Isokern fireplace. The fireplace was expensive -- Norweigen lava rock. The fireplace opening was 44" x 36" and the clay flue was 13.5" id. The house invariably filled with smoke when we used the fireplace. The chimney would draw well when the fire was very hot and very large. Even then it would put a fair amount of smoke smell in the house. The house is well insulated and tight. The fireplace has a 3" external air supply and we would "crack" a window -- all with varying degrees of success. The chimney fan has worked as advertised. We now enjoy the fireplace without burning eyes and smoke in the house. The fan was well built and was easy to install.
RETURNED FOR LARGER SIZE