- Color: Black | Brown | Gold | Red | Gray | Silver | Blue | Green
- Accessory Type: Paint
WE NEEDED TO MATCH OUR WOODSTOVE PAINT FROM 12 YEARS AGO. I HAD KEPT THE SAMPLE COLOR CHIP CARD SO IT WASN'T HARD TO FIND OUT WHERE TO BUY THE SMAE BRAND OF PAINT. THE ORDER ARRIVED QUICKLY AND OUR WOODSTOVE LOOKS BRNAD NEW AGAIN! THANK YOU.
Used this spray to repaint the fireplace casing. Stores have black, typical. But the wonderful variety of colors are great. We used golden brown. Against the stone it looks like a million bucks! EZ to use too.
The color was right on. I painted a mini wood stove for the yacht, and it looks perfect.
Stove Bright Paint
This paint worked well, and was a much needed update to an old Kodiak stove that I have finally refinished.
This paint is easy to apply. Goes on evenly , covers what you want to cover and holds up to extremely high wood stove heat . I definitely recommend this product!
You'll definitely want to use a ventilator and if doing inside have windows wide open! I did this job myself given my husband has a great white beard and wasn't able to use a ventilator because it wouldn't get a seal (and we both agreed keeping the beard was important!) We had some spots on our stove top that looked pretty awful. I put a coat of primer on those spots and at the tray in front of the door. I followed by 3 light coats of paint. WOW! Looks like a new stove. We did the curing according to directions and the paint looks fabulous! Great product - be sure not to take short cuts on the preparation!
I bought this paint to refinish part of our fireplace insert. My wife had spilled wax from a candle on it so I had to sand it off and repaint the front of the insert. I am grateful that you stocked Stove Bright High Temperature paint in the color that I needed. The paint was a perfect match and application was a breeze.
Easy to Use
Product was easy to use and covered well with a few light coats.
Love this stuff. I've repainted 3 fireplaces. Super fast shipping with Woodland Direct.
I ordered Stove Brite paint, shipping was quick. The only problem was the cans would not spray, still giving 5 stars due to the amazing customer service. They refunded my purchase without a hassle, quickly! Thanks.
Refinishing Fireplace Screen
I have a brass fireplace doors , with the help of the paint CSR I was able to get the right color paint to refinish my fireplace doors. The doors came out beautiful.
Painting Fireplace Doors
This paint was exactly what we were looking for. It applied smoothly and the doors look like new! Thank you for a great product!
Stove Bright Paint
Went on smooth and perfect, went a long way per can. Will fire up stove this week.
The item is what I wanted plus it shipped fast and delivered b4 the excepted date
Updated Fireplace Screen Cover
The "Stove Bright High Temperature Stove Paint" worked out great. My wife was able to update our great room fire place cover with new colors to match our new room colors. Thank you.
Stove bright high temp stove paint
The finish had come off the top back plate on my stove. Stove Bright was easy to use and covered the bare paint area completely. The almond color matched well. I did not clean first with acetone because the area was so close to the stove burners of my gas stove and I had no way to extinguish the pilot light. It still worked well. The odor is strong, so please remember to open doors and windows. I would highly recommend!
Stove bright paint
The color, quality, and speed of delivery were amazing.
Color for Coleman Green
The color was good but not glossy like orginal. It look as if it was flat green instead of gloss. The Coleman fire pit which is what I was painting was gloss and about 20 years old. It is the only Coleman device that needed painting touch up. The stove and lantern are OK I believe.
Primer and Paint Project
I used the primer and paint on the flue for our wood burning fireplace. The paint went on easily and looks great. Definitely use a respirator when applying it ($40 at Lowed Or Home Depot). I would give it 5 stars except for 2 points. First, a minor point, one can had a defective spray head. As I had 2 cans of each I swapped the spray from one of the other cans. Second, it doesn't seem to be a very tough finish. It scratched easily. It has only been on for 3 days and one fire so maybe it needs more time to cure. I had carefully prepped the surface so don't think that is the problem. Once the work in the area is completed there will be little activity near the flue so I will touch it up and be good going forward. Overall a good product I would recommend and use again.
High Temp Spray Paint
As directed, the fumes during use are significant. Surface prep critical as always but rushing the project does not pay. Coverage depends greatly on the poriuness or courseness of the surface. Took a fair amount of time to dry at a cool temp. 65 deg F. Final finish not bad but there are a lot of Silvers out there and a assumed match is a dream. I would use this product again if I prep much better.
Stove Bright Paint
I used the paint to cover a tractor muffler. After sanding the rust down, I painted it. I allowed it to dry for 24hrs and then ran the tractor. With in a few minutes the paint began to bubble. I will try again and allow it to dry several days before running the tractor. Please send this to me again in about 4 weeks. don
This paint works fantastic. Made my 15 year old stove look like new! your customer service reps. are very knowledgeable and made the purchasing experience a plus. Thanks