Rods

Great sturdy construction.Another fine American product.Not overseas garbage.These will pay for themselves many times over.

fiberglass chimney brush rods

very good quality

72" Fiberglass Rod - 3/8" PT

Great quality-made rod for the price. I looked at numerous dealers for a professional type cleaning rod, and this was the best one I could find. A little flexible, but stiff enough for connecting numerous rods together. For my chimney, I had 6 rods connected together. I used mine on 2-story colonial, with 9 foot ceilings and a 9/12 pitch roof. So the top of the chimney is up there, and the roof is steep enough that you don't want to go on the roof unless absolutely necessary. I had no problems using this and the "Professional Series Round Poly-Pro Lite Chimney Brush" for cleaning from inside the house. This was my first time cleaning my chimney, and for the price, the rods and brushes will pay themselves off the first time you use them, rather than paying someone else to do it.

Review

Product is a good quality and was delivered promptly.

extension poles

worked well from roof down but to stiff to bend to use from fireplace up to avoid removing chimney cap

3/8 fiberglass rods

My chimney is 30' tall so the cleaning rods I use must be sturdy. This rods are very sturdy that won't buckle or double over under tough conditions. These rods are very well made and have held up well.

Chimney cleaning rods

The rods were exactly what I expected and worked very well. They were high quality rods.

Review

Received the product promptly. Worked great. I would order from WoodlandDirect again without hesitation.

Extension rod 3/8inch

I should have got a 72 inch extension at 1/4 inch dia, but needed this length, not available in 1/4. Need to fix a coupling with pipe fittings to join the two.

3/8 Fiberglass rods

Worked very well. stong yet flexible

Rods

Clean your own chimney...it's easy...chimney guys are worse than plumbers

Rod for Chimney Brush

I accidentally ordered a chimney brush last year that did not fit my current rod. This one is perfect. Now I can use the smaller brush on the narrow portion of my chimney. The price was affordable, and it arrived quickly.

6 ' x 3/8 npt

My new 5" brush got stuck in flue and I had to clamp rod with a visegrip and twist it out. I twisted the end right off the rod. I replaced it with 3/8" pipe which I should have purchased instead of the fiberglass. I tried putting the end back on and drilling a pin hole to hold it but when the drill got into the glass, the bit just melted.

3/8" push rods

I have a long chimney requiring 4 72" push rods. I was pleased that while the rods would flex as I pushed/pulled the 12" square brush down the chimney, I was never concerned about the rods breaking. On the downside however, one of the 4 rods apparently was not glued to the metal connecting joint. Fortunately, the joint failed just as I put it into the top of the chimney and I could retrieve the rod and the others already in the chimney. Had the joint failed deep in the chimney I would have had a serious problem retrieving the brush. There is no visible sign that the metal joints on the rods have been glued to the rods. To fix the joint problem, I simply applied JB Weld and glued the joint solidly to the part and had no other issue.

review

Haven't used this product as yet and will not until season is over

3/8 rods

Very heavy duty, good for straight runs, too stiff for 45's.

chimney brush

The brush work Very well the poles fit good and didn't thread out while I used it.

Chimney Brush

The brush works very well the poles fit good and didn't thread out while I used it.

6ft Push Rods

Cleaned my ss liner in about 10-15 minutes. I only burn very dry wood so this task was a piece of cake. The rods are nice and thick and the crimps at the ends look good. They didn't seem to bend well when I was playing with them, but they did easily take my two bends in the chimney. Total plunge of 32 feet with two bends.

Originally ordered 4 but needed additional ones. Tried to find something at a local retailer that would work with rods ordered, could not. Ordered more and very glad I did. This product does not compare to the product in the local retailer!

Chimney brush.and rods.

Nice brush worked great.easy to use.

72" Fiberglass Rod

Fast delivery, great product. Works great.

Review

Well made. Glad I got the heavy duty version . Would absolutely recommend this product!

Good product

Rods worked as advertised, The first shipment was damaged in transit, Woodland Direct immediately shipped another set of 3 rods. Great customer service!

Recent Purchase

Cleaning rods and brush are great quality. Service and shipping were great. Thank you.

5

I believe in spending good money on good tools. Having said that I got exactly what I wanted and the plus, American made.

Don"t care what the manufacture says the rods don't thread into each other properly;;the male end should go into the female end all the way;;i would say the female ends not taped correctly;;i'll fix on my own with a tap!!!

Woked Well - Tight Threads

I bought a couple 6 foot and 4 foot fiberglass rods to go with a new 10 inch poly brush. Delivery was great. Everything worked great!. My only concern is the threads on all the rods don't mate very well. By that I mean you can get them started but they only go on a few turns before getting very tight. There is still plenty of thread left for them to go on further. I ended up using a drop of oil and really cranked on them to get them on enough so they wouldn't come apart when I used them. All the ends are 3/8 NPT so that is not an issue. Perhaps just a quality issue with the threads being made. Other wise. the system worked great. The flexible rods are very valuable when using more than one together.

Pipe threads 3/8 pt

The rods seem quality enough but not as flexble as hoped. However the 3/8 pipe threads were cut to shallow. luckily I have those cutting dies in my work drawer and could chase the threads as they would only go om about two turns and bind. I would have had to send them back otherwise.

Review

Made well. Goes through bend in chimney with no problem

Review

They are very good. Nice and sturdy, thread together easily.

Rod connection threads

Poorly machined from aluminum. Only got 2 turns before seizing. I would prefer steel.

Nice stiff rod

Even though my brush has a 1/4” fitting, I opted for this 3/8” rod and the adapter to use it with my brush. I’m glad I bought the heavier rod. It is much stiffer, allowing me to push through any tight spots.

. | Lewiston, MI
Submitted: 08/16/2022

Chimney poles

Great product!!

Annabelle O. | Canton, GA
Submitted: 11/26/2022